In my later SM 2000 REDLINE the zing of the ONAN was to be changed every year, beeing almost totally gone away In the actual 54, I change it also every year, but it is almost new....I do not know

Yes, it is connected to the points you mention. However, the cable I have with my unit, the green ground wire is insulated (not bare). See Icom link:

Alan/Mark, I acknowledge that the manufactured cable that connects the 802 to the AT140 has a ground wire in it. It is a bare wire, correct? Here is what I understand, please correct me if I am

I check mine when I change the oil...it always looks new. Kent SM243 Kristy

Hi Peter. Thanks for news of ORION. I do not where A285 is located, but when I will be in GOUVIA I will found it. We will stay in Gouvia until 16 july and after we will sail in Ionian, I have not

Hi Terry, I'm not on this group too much and I'm not sure if this reply is going just to you or the entire group. I'll send a message through Facebook if I don't have your email address saved

Thanks Kent, Cheers Danny On Thursday, 26 June 2014 2:45 AM, "karkauai@... [amelyachtowners]" wrote: Hi, Danny, Here is a link to the Vetus mounts that are said to

Dear Jose, Yes I walked past ORION yesterday in Gouvia and she looked very neat and tidy. A very impressive yacht. Thank you for getting in touch. Carango is in Gouvia on berth A 285, I think, which

Hi Peter, ORION is in GOUVIA waiting for our return on 13 july. Will you be in GOUVIA at this period? If yes we could meet. After 15 or 16 we will sail in Ionian before returning with ORION to France

Hi, Danny, Here is a link to the Vetus mounts that are said to be the ones Amel

Happy story to report. Having plumbed this site for tips ( thanks to all who replied ) and spent a sleepless night anticipating unyielding stainless bolts and the need for drills and saws and having

There is Zinc in the Onan system but no Zinc on the Volv Penta on my Amel54. Peter Forbes ppsforbes@... Carango Sailing Ketch Amel 54 #035 Gouvia Marina - Corfu

Hi, As I know there is not anode zinc on D3-110 Volvo, the alone anode in the AMEL 54 are in the Onan generator, that I change every year and in the bow thruster propellers, that I never

I would suggest that it doesn't matter if you switched the wires from common to moving. However if you used another set of contacts, or didn't use the common, that would certainly effect the logic. It

I looked on the engine, looked in the manual, and checked at a Volvo penta dealer. There is no zinc on this engine's cooling water system?

I believe I may have switched 2 wires when replacing the relay switches. Does anyone have a picture (I should have taken a close up) of the relays or a diagram of the color coded wire diagram. The

Hi All, I need to replace my engine mounts. Does any one have the identifying number for the vetus engine mounts. Apparently this specifies the density of the rubber. Cheers Danny SM 299 Ocean Pearl

Bill, Thanks for the lead. We have had Sequel for just a year now and can attest to the previous owner having serious leaking around the foam seals. I don't know about his pinning habits. We are