|
Re: [Amel Yacht Owners] Diode in Starter shutoff circuit - Super Maramu
Nicht nur bei uns, habe leider kein serielles Kabel mehr
Grüße Jochen
-----Original-Nachricht-----
Betreff: [Amel Yacht Owners] Diode in Starter shutoff circuit - Super Maramu
Datum: Fri, 30
Nicht nur bei uns, habe leider kein serielles Kabel mehr
Grüße Jochen
-----Original-Nachricht-----
Betreff: [Amel Yacht Owners] Diode in Starter shutoff circuit - Super Maramu
Datum: Fri, 30
|
By
dr_hofschulte
·
#17059
·
|
|
Re: [Amel Yacht Owners] Nightmares with Shrouds, Mast & now a little with Transmission
Hi, we have been in contact with them, Maud in specific, they are already preparing another mast.
The shrouds started snapping, thread by thread.
Very aware of the tension and will do as recommended
Hi, we have been in contact with them, Maud in specific, they are already preparing another mast.
The shrouds started snapping, thread by thread.
Very aware of the tension and will do as recommended
|
By
faial_l <no_reply@...>
·
#17058
·
|
|
Re: Nightmares with Shrouds, Mast & now a little with Transmission
Hi Bill,
This one since 2011, but had a Maramu previously.
Yes had replaced the entire kit, for now have found a workaround after brainstorming with some marine engineers.
Yes the reinforcement had
Hi Bill,
This one since 2011, but had a Maramu previously.
Yes had replaced the entire kit, for now have found a workaround after brainstorming with some marine engineers.
Yes the reinforcement had
|
By
faial_l <no_reply@...>
·
#17057
·
|
|
Re: [Amel Yacht Owners] Rocna Anchor fit
After all these comments we will be changing to a Rocna 40kg too. Do they have a stainless steel version as well? We had a Rocna 33 on our Island Packet and loved it as it simply dug in every time
After all these comments we will be changing to a Rocna 40kg too. Do they have a stainless steel version as well? We had a Rocna 33 on our Island Packet and loved it as it simply dug in every time
|
By
Colin - ex SV Island Pearl
·
#17056
·
|
|
Re: [Amel Yacht Owners] open CPN
Thanks again Bill
From: "'Bill & Judy Rouse' yahoogroups@... [amelyachtowners]"
To: "amelyachtowners@..."
Sent: Saturday, 31 May 2014 11:51 PM
Subject: Re: [Amel Yacht Owners] open
Thanks again Bill
From: "'Bill & Judy Rouse' yahoogroups@... [amelyachtowners]"
To: "amelyachtowners@..."
Sent: Saturday, 31 May 2014 11:51 PM
Subject: Re: [Amel Yacht Owners] open
|
By
Danny and Yvonne SIMMS
·
#17055
·
|
|
Re: [Amel Yacht Owners] open CPN
Thanks Bill
From: "'Bill & Judy Rouse' yahoogroups@... [amelyachtowners]"
To: amelyachtowners@...
Sent: Saturday, 31 May 2014 11:34 PM
Subject: Re: [Amel Yacht Owners] open CPN
Thanks Bill
From: "'Bill & Judy Rouse' yahoogroups@... [amelyachtowners]"
To: amelyachtowners@...
Sent: Saturday, 31 May 2014 11:34 PM
Subject: Re: [Amel Yacht Owners] open CPN
|
By
Danny and Yvonne SIMMS
·
#17054
·
|
|
Re: [Amel Yacht Owners] Rocna Anchor fit
We have also a 40 kg on our SM #232, you can see pictures in the photo section, album Lady Annila (yes I know, I will split it up in dubjects instead, haven't hade enough good internet connection for
We have also a 40 kg on our SM #232, you can see pictures in the photo section, album Lady Annila (yes I know, I will split it up in dubjects instead, haven't hade enough good internet connection for
|
By
Ann-Sofie Svanberg <kanalmamman@...>
·
#17053
·
|
|
Re: [Amel Yacht Owners] Diesel Heater Installation
We installed a Wallas diesel forced air heater on our SM2k. We mounted the unit on the forward surface of the bulkhead at the nav station, where an originial cabin light was installed, so it blows
We installed a Wallas diesel forced air heater on our SM2k. We mounted the unit on the forward surface of the bulkhead at the nav station, where an originial cabin light was installed, so it blows
|
By
john martin <symoondog@...>
·
#17052
·
|
|
Re: [Amel Yacht Owners] open CPN
Danny,
Typo...sorry...
This is the correct link:
http://www.cruisersforum.com/forums/f134/
Bill
Danny,
Typo...sorry...
This is the correct link:
http://www.cruisersforum.com/forums/f134/
Bill
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#17051
·
|
|
Re: [Amel Yacht Owners] Diesel Heater Installation
Drew,
Correction, I emailed them to you...cannot upload right now.
Bill
BeBe, 387
Drew,
Correction, I emailed them to you...cannot upload right now.
Bill
BeBe, 387
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#17050
·
|
|
Re: [Amel Yacht Owners] open CPN
Danny,
I know where you can ask the question.
Go to www.cruisersforum.com/fourms/f134/
This is the forum that all the geeks that wrote opencpn use to communicate. Go there and ask your question.
Danny,
I know where you can ask the question.
Go to www.cruisersforum.com/fourms/f134/
This is the forum that all the geeks that wrote opencpn use to communicate. Go there and ask your question.
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#17049
·
|
|
Re: [Amel Yacht Owners] Diesel Heater Installation
Drew,
I have a bunch of photos from Eric (Kimberlite).
I do not have instructions. I will upload these to the Amel Website in a folder titled Diesel Heater.
It mat be a day or two before I get it
Drew,
I have a bunch of photos from Eric (Kimberlite).
I do not have instructions. I will upload these to the Amel Website in a folder titled Diesel Heater.
It mat be a day or two before I get it
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#17048
·
|
|
open CPN
Hi all,
last year a friendly cruiser gave us the open CPN chart system for our lap top. They included the Google feature but just for the Fiji area. It gives photographic images showing reefs etc.
Hi all,
last year a friendly cruiser gave us the open CPN chart system for our lap top. They included the Google feature but just for the Fiji area. It gives photographic images showing reefs etc.
|
By
Danny and Yvonne SIMMS
·
#17047
·
|
|
Diesel Heater Installation
We've just purchased a Webasto EVO 5500 heater to use in colder climates without shore power or generator. Does anyone have pictures and/or advice for installation of this or similar
We've just purchased a Webasto EVO 5500 heater to use in colder climates without shore power or generator. Does anyone have pictures and/or advice for installation of this or similar
|
By
Gaffney, Drew <drew.gaffney@...>
·
#17046
·
|
|
Re: [Amel Yacht Owners] Diode in Starter shutoff circuit - Super Maramu
I have also had this problem in the past. In my case it was the connector from the inst. panel and key switch at the black box on the engine. This connection can come loose from vibration.
Don
I have also had this problem in the past. In my case it was the connector from the inst. panel and key switch at the black box on the engine. This connection can come loose from vibration.
Don
|
By
myersdon1
·
#17045
·
|
|
Re: [Amel Yacht Owners] Diode in Starter shutoff circuit - Super Maramu
Veit, I have the same problem , however it is intermittent , half the timeit does shut off with the key, when it doesn't I keep turning the key an deventually the engine shuts off. I thought it was
Veit, I have the same problem , however it is intermittent , half the timeit does shut off with the key, when it doesn't I keep turning the key an deventually the engine shuts off. I thought it was
|
By
Patrick McAneny
·
#17044
·
|
|
Re: [Amel Yacht Owners] Nassau to Exumas
Good morning Derrick,
I went with the dingly last Sunday in the Narrow and it is... "shallow" (and narrow), I was told I can only go for 1 hour at high tide, which is not the type of margin I
Good morning Derrick,
I went with the dingly last Sunday in the Narrow and it is... "shallow" (and narrow), I was told I can only go for 1 hour at high tide, which is not the type of margin I
|
By
Alexandre Uster von Baar
·
#17043
·
|
|
Re: [Amel Yacht Owners] Nassau to Exumas
Alexandre,
"The Narrows" is indeed the name of the cut between Paradise Island and Athol Island. I have been through it many times, but only in shallower draft boats than ours. Check it out with
Alexandre,
"The Narrows" is indeed the name of the cut between Paradise Island and Athol Island. I have been through it many times, but only in shallower draft boats than ours. Check it out with
|
By
Derick Gates SM2K #400 Brava
·
#17042
·
|
|
Re: Diode in Starter shutoff circuit - Super Maramu
Veit,
Take a look at:
http://www.elektronica-online.nl/content.php?cat_id=621&hoofdcat=Onder.
Second to last entry seems to be the part you are looking for.
Derick
Veit,
Take a look at:
http://www.elektronica-online.nl/content.php?cat_id=621&hoofdcat=Onder.
Second to last entry seems to be the part you are looking for.
Derick
|
By
Derick Gates SM2K #400 Brava
·
#17041
·
|
|
Re: Diode in Starter shutoff circuit - Super Maramu
Sorry - just seeing that I wrote the wrong number - it is 16 24 394.
Cheers,
Veit
Sorry - just seeing that I wrote the wrong number - it is 16 24 394.
Cheers,
Veit
|
By
veitm@...
·
#17040
·
|