Stephanie, We have washed the covers on the foam and off the foam...by hand and by machine. If you wash them by hand, rinse thoroughly and use a wet vacuum to remove as much of the rinse water as

Ok correction taken! Stephanie DiBelardino On Jul 28, 2014, at 5:24 PM, "Germain Jean-Pierre jgermain@... [amelyachtowners]" <amelyachtowners@...> wrote:

Do not put on wet. Let them air dry. On Mon, Jul 28, 2014 at 5:09 PM, Stephanie DiBelardino stephiedib@... [amelyachtowners] <amelyachtowners@...> wrote:

NOOOOOO! Do not put them on wet... dry thoroughly, then put foams back in. JPG On 28 Jul 2014, at 22:09, Stephanie DiBelardino stephiedib@... [amelyachtowners] <amelyachtowners@...> wrote:

Thank you all for your advice! cool wash And back on wet! I'm on it! And while I am aboard cleaning, I remind Indecent how much I love her! Stephanie DiBelardino On Jul 28, 2014, at 1:29 PM,

Stephanie, We washed the covers in cold water using a regular detergent (All) on the gentle cycle. They came out great. We did not put them in the dryer. No shrinkage at all. Some of the foam can

Hi Stephanie My experience is the same as Jean-Pierre's. A cool wash and dry naturally. Best wishes, Peta Johnson SOLITUDE SM2K 461 On 28 Jul 2014, at 18:29, "Stephanie DiBelardino stephiedib@...

Hello Stephanie, I just had to go through this myself. Take them off and wash them in cool water. There was no shrinkage on mine. Cordially, Jean-Pierre Germain S/Y Eleuthera #007. On 28 Jul 2014,

Hi all! In re a SM (ours is 353), here is a housekeeping question: I want to wash the covers on the cushions and then treat with Scotchguard. I noted that they all have zippers. Has anyone ever

Kent, Glad you keep the postings on this current. Our Amel was repowered with the 4JH-HTE by the previous owner and it would give me peace of mind knowing if the correct engine mounts were used.

I'm back about motor mounts for my SM243 with new Yanmar 4JH4HTE 110 HP. I received an email from Emilie at Amel that said the Vetus HydroDamper mounts are NOT appropriate for the 110 HP Yanmar. She

I bought a hundred of each (for the curtains are a little smaller, for the shower curtains are a little larger) a couple years ago..I've got a lot of spares if anyone wants me to send you a

A late message for all who were at the Chesapeake Rendezvous, it was great meeting all of you. At the rendezvous, after several beers, guys will often drift onto topics that are "guy" things.

We have found that a mix of 1 part white vinegar and 2-3 parts water on a short rag followed a dry towel will keep all the interior wood looking as new. You can also wipe the headliner with the same

Gary, The wood is finished with a semi-gloss polyurethane. I would think you can use anything that is safe to use on home furniture with a non abrasive cloth. We use a mix of mild detergent and

Murphy's Oil Soap, followed by a high quality furniture polish (I buy my furniture polish in Italy from a store that supplies wood-workers). Stephanie SM 353 Indecent currently based on Grand Bahama

Has another found a good way to clean the interior wood on their AMEL? Thanks Gary Wollenberg Bozo Cinq #44 AMEL 54

Gabriele, 15 years ago I was restoring a 1979 KZ 750 with a very rusty fuel tank and discovered several kits available for cleaning and coating the interior of rusty fuel tanks with pin holes. It

Hi, Sorry for a late answer, I was traveling. Thank you Dennis, Thank you Joel Joel, when you dont agree on any argument, please, continue to tell us. We appreciate it very much. I have well clear in

Hello All, Anyone with an AMEL 55 or sailed on one who can share their experience please? Rob AMEL 54 120 Cléo