|
Re: [Amel Yacht Owners] Yanmar Mixing Elbow Replacement
Much jewelry is investment cast as well as auto parts, and dentalcrowns.
Fair Winds
Eric
Kimberlite SM 376
From:amelyachtowners@... [mailto:amelyachtowners@...] OnBehalf Of
Much jewelry is investment cast as well as auto parts, and dentalcrowns.
Fair Winds
Eric
Kimberlite SM 376
From:amelyachtowners@... [mailto:amelyachtowners@...] OnBehalf Of
|
By
sailormon <kimberlite@...>
·
#16519
·
|
|
Re: [Amel Yacht Owners] Yanmar Mixing Elbow Replacement
Bill,
That looks beautiful, I just bought an original yanmar one-which Iwill try to return.
Thanks for the intel.
Eric
Kimberlite SM 376
From:amelyachtowners@... [mailto:amelyachtowners@...]
Bill,
That looks beautiful, I just bought an original yanmar one-which Iwill try to return.
Thanks for the intel.
Eric
Kimberlite SM 376
From:amelyachtowners@... [mailto:amelyachtowners@...]
|
By
sailormon <kimberlite@...>
·
#16518
·
|
|
Yanmar Mixing Elbow Replacement
I found this part for the Yanmar 100hp
I found this part for the Yanmar 100hp
|
By
yahoogroups@...
·
#16517
·
|
|
Re: [Amel Yacht Owners] finally bought an Amel
Look at Dennis' solution to the fresh water pump problems he had (Post #14750). My SM (#243-1999) also has the same A.M.F.A. pump as he replaced. Others have put on-demand pumps in as replacements
Look at Dennis' solution to the fresh water pump problems he had (Post #14750). My SM (#243-1999) also has the same A.M.F.A. pump as he replaced. Others have put on-demand pumps in as replacements
|
By
karkauai
·
#16516
·
|
|
Re: [Amel Yacht Owners] Wiring capacitor on low pressure pump
Hi Bill,
Thanks very much for your answer. It does answer my question, The old damaged capacitor is still wired in place, so all I have to do now is wire the new one to the same terminals. Thanks
Hi Bill,
Thanks very much for your answer. It does answer my question, The old damaged capacitor is still wired in place, so all I have to do now is wire the new one to the same terminals. Thanks
|
By
johnabo2003 <no_reply@...>
·
#16515
·
|
|
Sulajon SM # 347
I am selling my 2001Amel Super Maramu 53' ketch docked in front of Johnny Hassan's at Nanny Cay Marina,Tortola British Virgin Islands office for the past 12 years. She is hull #347and very lightly
I am selling my 2001Amel Super Maramu 53' ketch docked in front of Johnny Hassan's at Nanny Cay Marina,Tortola British Virgin Islands office for the past 12 years. She is hull #347and very lightly
|
By
John Folino <jfolino901@...>
·
#16513
·
|
|
Re: Resolux interior lights
We have changed our boat to all LED lighting. I used all of the original Amel fixtures. I removed the guts and replaced them with warm colored LED's with built in drive electronics from a company
We have changed our boat to all LED lighting. I used all of the original Amel fixtures. I removed the guts and replaced them with warm colored LED's with built in drive electronics from a company
|
By
marksharki
·
#16512
·
|
|
Re: finally bought an Amel
Congrats and welcome.
I'm a newer owner as well, but spent much time aboard kents boats (thanks kent)
Not sure if the bilge pump is the same put i still have either the original or an exact
Congrats and welcome.
I'm a newer owner as well, but spent much time aboard kents boats (thanks kent)
Not sure if the bilge pump is the same put i still have either the original or an exact
|
By
ericmeury@...
·
#16511
·
|
|
Re: [Amel Yacht Owners] finally bought an Amel
Thanks Roy
By
n33077@...
·
#16510
·
|
|
Re: [Amel Yacht Owners] finally bought an Amel
Aras,
Congratulations on the purchase of your Sharki. I know you will enjoy it….
I just replaced the refrigerator/freezer with a Norcold DE-0788 12 volt / 110 volt AC. It fit very well and looks
Aras,
Congratulations on the purchase of your Sharki. I know you will enjoy it….
I just replaced the refrigerator/freezer with a Norcold DE-0788 12 volt / 110 volt AC. It fit very well and looks
|
By
Roy Duddy <RDuddy@...>
·
#16509
·
|
|
Re: [Amel Yacht Owners] Cheasapeake Bay Rendezvous
Aras, Welcome to the Amel group , send your contact info to me and I willadd you to the list. email to Sailw32@... Pat
In a message dated 4/16/2014 9:40:05 A.M. Eastern Daylight Time,n33077@...
Aras, Welcome to the Amel group , send your contact info to me and I willadd you to the list. email to Sailw32@... Pat
In a message dated 4/16/2014 9:40:05 A.M. Eastern Daylight Time,n33077@...
|
By
Patrick McAneny
·
#16514
·
|
|
Re: [Amel Yacht Owners] Cheasapeake Bay Rendezvous
Good morning.
As a new Amel owner, I would love to join the rendezvous this year.
Regards,
Aras
Good morning.
As a new Amel owner, I would love to join the rendezvous this year.
Regards,
Aras
|
By
n33077@...
·
#16508
·
|
|
Re: [Amel Yacht Owners] finally bought an Amel
Thanks Kristy.
The draws 6'6" measured. Book says it only draws 6' I just got the call that the water pump is indeed nearly dead. To the best of my knowledge the Sharki shares many of the same
Thanks Kristy.
The draws 6'6" measured. Book says it only draws 6' I just got the call that the water pump is indeed nearly dead. To the best of my knowledge the Sharki shares many of the same
|
By
n33077@...
·
#16507
·
|
|
Re: [Amel Yacht Owners] finally bought an Amel
Welcome to the family, Aras. I know you'll be happy with your Amel, and you've found the right place to come for help as a new (or veteran) owner. I am a SM owner, so won't be able to help you much
Welcome to the family, Aras. I know you'll be happy with your Amel, and you've found the right place to come for help as a new (or veteran) owner. I am a SM owner, so won't be able to help you much
|
By
karkauai
·
#16506
·
|
|
finally bought an Amel
After some months of searching, I finally was able to buy an 1988 Amel Sharki (#163). Joel, if you are out there reading this; THANK YOU again for all your help. Joel did me a great service in
After some months of searching, I finally was able to buy an 1988 Amel Sharki (#163). Joel, if you are out there reading this; THANK YOU again for all your help. Joel did me a great service in
|
By
n33077@...
·
#16505
·
|
|
Test- do not Reply-Thanks
By
sailormon <kimberlite@...>
·
#16504
·
|
|
Resolux interior lights
Anybody find a good alternative to the Resolux lighting inside older Amel.
Anybody find a good alternative to the Resolux lighting inside older Amel.
|
By
ericmeury@...
·
#16503
·
|
|
Owner's Manual
By
Jean-Pierre Henkart <jhenkart@...>
·
#16502
·
|
|
Re: [Amel Yacht Owners] Gear position when sailing and propeller drag freewheeling vs locked
Hi Attilio,Thanks for the compliment, but this time it's just "When in doubt, read the directions" .... and, of course, since "The Captain" designed our Santorins to freewheel for power generation,
Hi Attilio,Thanks for the compliment, but this time it's just "When in doubt, read the directions" .... and, of course, since "The Captain" designed our Santorins to freewheel for power generation,
|
By
Craig Briggs
·
#16501
·
|
|
Re: [Amel Yacht Owners] Gear position when sailing and propeller drag freewheeling vs locked
Hi Craig,
perfect and final reply, as usual.
Th little plaque written in French says that it is absolutely forbidden to shift into forward gear when sailing. With Stardust, our previous 39ft
Hi Craig,
perfect and final reply, as usual.
Th little plaque written in French says that it is absolutely forbidden to shift into forward gear when sailing. With Stardust, our previous 39ft
|
By
Siviero Attilio <attilio.siviero@...>
·
#16500
·
|