I have read numerous postings regarding overcharging and cooking batteries. My guess is that there can be as many reasons as there are postings...230V chargers, 175 Amp alternator, sorted battery,

Hi again Terry, slip of the finger on the key pad. The ratios are A 2.74 and B 2.72. Sorry regards Danny SM299 Ocean pearl ________________________________ To: amelyachtowners@... Sent:

Hi Terry on Ocean Pearl the ratios are A 2.72 and B 2.72 Regards Danny Ocean Pearl SM299 Currently Fiji ________________________________ To: amelyachtowners@... Sent: Friday, 19 July

We are still trying to unravel the mystery of limited RPM's on Libby and need another data point that members may be able to help with. Libby's transmission was changed out a couple of years ago and

Thanks, Frank, I will have a look. Ian

For any hard growth, I'd recommend the Waveblade. I was blown away by how easy it removes everything. Their website is www.waveblade.com And no, I don't sell them. Just a happy user. Frank

Hi y'all, I have mentioned in the past that we put Coppercoat on Pen Azen, in 2010 and I thought it might be of interest to see how it has turned out. After relaunching in August 2010 the boat sat

Hi Bill, We suffered from the same waterline fouling ( which SM doesn't?) and when we applied Coppercoat we went further than you and took it to the top of the orange stripe, adding a new white strip

Hi Dave, thanks for your comments. QSails in Izmir, Turkey is where the Hydranet sails were sewn/assembled. QSails is owned by Tasmin Oge <qsails"at"qsails.com>. His plant/loft is almost the size

Bill, Did they use the Sunbrella Ultra for the suncover? You mention it being a bit heavier and the Ultra is about a half oz heavier I think. We've used it for awnings and covers, but hadn't even

Hi Greg I purchased the same system. Its basically plug and play. I use it with a Mac lap top. The computer recognized it right away and it seemed easy enough to use. Only thing is the grommet on the

I have a some chipping paint on my topside. What is the recommended paint type for the topside? Would a regular two part epoxy work ok? Of course matching colors is a whole diffferent problem.

Dear all, Recently I visited our Climma dealer in Holland for spare parts for the Calpeda pump when I saw a new type of screens (air filter) for the Climma airco installed on our SM2K which is a "9

I posted photos of these sails in a new Album titled "Sails." http://groups.yahoo.com/group/amelyachtowners/photos/album/379809430/pic/list The UV trim is a taupe color similar to Amel's new logo

I do not know if many of you suffer from a sinking waterline boot stripe, but we have. When full of fuel, water and all of our stuff, the antifouliing is about 1 inch 25mm too low. We have been in

Dear Bill and Peter Thanks a lot. I have got allready picture from Riza. I wanted to see a few more :-) Regards Lior 2013/7/16 Peter Forbes <ppsforbes@...> [Non-text portions of this

Yes - I will post pictures when completed - should be in the next 3 weeks. Peter Peter Forbes Amel 54 #035 Currently with Emek Marin Goçek Turkey, 07836 209730 ppsforbes@... [Non-text

Hi, I do not want to change your mind, but if you choose this one, it will arrive with easy to understand instructions and everything is already programmed...no need to change any settings. The guy

Lior, I will post photos when completed. I first saw Emek Marine's solar arch/davits on "Soleil Bleu," an Amel 54. I liked the arch because the upright tubes were curved rather than straight. They

More pics of the construction, rigging etc posted in Photos folder Elyse-Staysail Cheers Alan SV Elyse SM#437