Dave, I have it...a hand drawn original in French Amel diagram. I'll dig it out and email you a copy. Dave

Does anyone have a rig plan for the older Maramu with the Isomat single spreader mainmast? I'd especially like to know what the original wire diameters were and any other info that might be

I made one out of mahogany but it was a pain to keep varnished. I've just made another out of off-white starbord which is close to Amel white. Two SS plates with curls at the ends screw into the

I replaced my bow seat with one made locally to match using marine grade mahogany veneer plywood. See photos. It is a trapazoid with the parallel edges being 9.25" and 19.75 and the angled edges being

Antal 109x78mm.

Thanks for your note Bill. Donato Ocean Bird SM #468 Punta Ala, Tuscany, Italy Inviato da iPhone

Welcome to the group. Your experience will improve if you sign your postings with name, model and hull...you might even meet some owners if you include your location. We added zippers to the

I need to replace the outhaul block at the aft end of the main boom. Could someone tell me the make,model and size of the original block. The block I have now is not original and does not provide a

Many thanks Danny. The zips were original or you did the job ? Donato SM 468 Ocean Bird Inviato da iPhone

Hi Donato, Ocean Pearl has zips, they work well. Regards Danny SM 299 Ocean Pearl ________________________________ To: "amelyachtowners@..." <amelyachtowners@...> Sent:

Hi I'm new of this group and excited to post my first msg. It's about the sprayhood. While trying to dismantle it for repair, I've been surprised to notice that it's quite impossible to take off

Done. Fair Winds. JL Group Moderator

Yes Alan, I have the Technical Notice for 24v 30a, 24v 50a, 12v 60a and 12v 80a, and they are all for 115v/230v Danny. SM299 Ocean Pearl ________________________________ To:

Hi Bob, only that he said to me in passing, "if you need new batteries we are doing lithium" which I took to mean that he had an agency and was selling them. Regards Danny SM 299 Ocean

Danny slightly off subject. Have you spoken to Cameron in NZ about what he has done on Tranquility with lithium batteries? Bob s/v Minaxi

Thanks ...Bill, I looked at it again...its states 115V / 230V ...so I guess its OK.. Cheers Alan Elyse SM437

Alan, Did you notice that what you posted is for a 115 volt Dolphin charger? Bill BeBe

Thanks Alan, sounds like you found a super boat. I guess the underlying reason for my question was that battery changes may have been made without the commensurate alteration to the settings on the

Hi Danny, I just posted a Doplhin Technical Note in the Files section that explains all of that. Cheers Alan Elyse SM437

Hi all (again), (sitting on the boat in a marina on a rainy day) With well maintained and protected instruments, and SSB and VHF radios and chart plotters and Radar (as those on the Amel are) in your