Just call Spurs and tell them you have the same line cutter as Kimberlite, they keep track of what they sell by boat name. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Hi all, Is the setup on the SM different from the Sharki then?   On our Sharki sailplan there is a 'Trinquette secours', a heavy weather 11 sq mt sail made to be set from a strop at the spreaders

Hi all, at the moment I am not at the boat, but I need to know the size of the rope cutter on the SM2k, to order some spare parts shortly. Does anybody know and can give me the size or "Model Type"

Dennis, There's no "right answer" so to speak. Every material has advantages and disadvantages. Many Super Maramu owners in Europe favor Radial Hydranet from Dimension Polyant. It's important to note

Years ago, I did a hull up restoration of a Tartan-37. I replaced everything on the boat including every nut bolt and screw. The only thing that I did not replace were the hatch frames. They were

All of this talk about not putting a vertical load on the foredeck cleat prompts me to ask...On our Sharki I was planning to use soft shackles around the aft cleats as anchor points for the mizzen

Jose, Thank you Eric Amel Super Maramu #376 Kimberlite _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of Jose_Luis Sent: Sunday, February

Hi Eric, I was able to move the extra photos to your other folder and delete it. But I do not know why you could not do it. I think both folders had the same name. Regards JL

Joel, There are 2 photos in the Files section of our site labeled

Uh Oh. Eric, the JFP on that drawing is me. Several months after I sent that to you, I got reamed, but good, by Jacques Carteau. He found out I was encouraging this modification and proceeded to

There are 2 Kimberlite files, one with over 60 photos and one with 6. I can not seem to delete the one with 6 . Can anyone help me in deleting this file? The small one does not have an option for me

I received this from Amel years ago. It is also posted in Kimberlite Photo File. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Scan10037.JPG Uploaded by :

Dennis, We have ordered new Genoa, Main & Mizzen sails made from Radial Hydranet from QSails in Izmir, Turkey. I believe the main differences between Hydranet and Dacron is the shape-holding

Good Day All We are looking at installing an Inner Fore-stay on Nomad. It would be a Solent type of rig with a self tacking jib forward of the mast. No need for running back-stays. Head goes to top of

I need to replace the mainsail on my 2003 sm2k. I would welcome advice on the best material, the weight ( in ounces) and the cut. All views would be most welcome. Happy Sails. Dennis SM408

Hi Joe, I fitted a Sterling Digital Pro but only because a friend gave it to me, through choice it would have probably been another ADVERC as I have had faultless service from them in the past, that

Hi you will want to use heavy duty drive belt with that install. They are marked XL before the standard number. We also mounted a turn buckle to keep the belt tight. Regards Richard Piller Cell

I have added a couple of pictures to Popeye's folder including one of our holding tank and a sketch of the setup I have used. Dave - I expect there will be a logical reason... maybe there is a stand

Hi Graham I had a look at the option you followed and will put it to the committee. I had been wondering, if it would surfice, to hook up the Lucas Alternator to a smart regulator for the battery