|
Re: [Amel] Re: Navigation station seating addition
I changed the helmsmans and the nav seats using Softrider pedestals made in New Zealand. These are the only ones I have ever seen to have gas filled struts to raise/lower and to move the seat
I changed the helmsmans and the nav seats using Softrider pedestals made in New Zealand. These are the only ones I have ever seen to have gas filled struts to raise/lower and to move the seat
|
By
Anne and John Hollamby <annejohnholl@...>
·
#11289
·
|
|
Re: [Amel] Re: Lofrans Tigres switch covers
Hi John,
Thanks for the sugestion. That was going to be my fall back option if I could not find the rubber covers. THe one I have bought fits well and so we now have a solution. Thanks for the
Hi John,
Thanks for the sugestion. That was going to be my fall back option if I could not find the rubber covers. THe one I have bought fits well and so we now have a solution. Thanks for the
|
By
GrahamJohnston42 <grahamjohnston42@yahoo.com>
·
#11288
·
|
|
Re: Navigation station seating addition
I had Garhauer make a spring loaded chair mount for our Maramu. We don't have as much space as the SM for a permanently mounted chair so I wanted something that tucked against the bulkhead when not
I had Garhauer make a spring loaded chair mount for our Maramu. We don't have as much space as the SM for a permanently mounted chair so I wanted something that tucked against the bulkhead when not
|
By
Dave_Benjamin
·
#11287
·
|
|
Navigation station seating addition
Hello all,
After sitting countless hours at the navigation station in discomfort due to lack of support for my back, we decided to add a back to the existing stool and a swivel. We had a large piece
Hello all,
After sitting countless hours at the navigation station in discomfort due to lack of support for my back, we decided to add a back to the existing stool and a swivel. We had a large piece
|
By
george cerillo
·
#11286
·
|
|
Re: [Amel] Re: Lofrans Tigres switch covers
If you can't find the rubber covers for the switches, just cut a piece of flexible plastic and tape it on top of the buttons. Tape the forward end and the 2 sides,leaving the aft end open for
If you can't find the rubber covers for the switches, just cut a piece of flexible plastic and tape it on top of the buttons. Tape the forward end and the 2 sides,leaving the aft end open for
|
By
john martin <symoondog@...>
·
#11285
·
|
|
interesting websites for waterproof screws and seals etc.
http://view.email.globalspec.com/?j=fe5a167175600174721d
<http://view.email.globalspec.com/?j=fe5a167175600174721d&m=fef11d73726d06&l
s=fdf916767662037d70177574&l=fefb107070670c&s=fe20127771600d75751d
http://view.email.globalspec.com/?j=fe5a167175600174721d
<http://view.email.globalspec.com/?j=fe5a167175600174721d&m=fef11d73726d06&l
s=fdf916767662037d70177574&l=fefb107070670c&s=fe20127771600d75751d
|
By
Sailormon <kimberlite@...>
·
#11284
·
|
|
2 diferent types of foam seals used on the bow thruster
Ian,
A close examination of the seals should prove that 1 of the 3 is different. This is the one that goes inside the boat.
The following I copied from BOW THRUSTER SERVICE by Gary Silver.pdf which
Ian,
A close examination of the seals should prove that 1 of the 3 is different. This is the one that goes inside the boat.
The following I copied from BOW THRUSTER SERVICE by Gary Silver.pdf which
|
By
Judy and Bill aboard SV BeBe <yahoogroups@...>
·
#11283
·
|
|
Re: [Amel] 2 diferent types of foam seals used on the bow thruster
Thanks Bill,
it worked this time, but no mention is made as to which type of foam
seal goes where assuming my spares kit has two types, which I believe it
does, nor which way up the tube lip seal
Thanks Bill,
it worked this time, but no mention is made as to which type of foam
seal goes where assuming my spares kit has two types, which I believe it
does, nor which way up the tube lip seal
|
By
Ian Shepherd
·
#11282
·
|
|
Re: i hope this fixed it
_____
From: Sailormon [mailto:kimberlite@...]
Sent: Saturday, July 21, 2012 6:27 PM
To: amelyachtowners@...
Subject: i hope this fixed it
_____
From: Sailormon [mailto:kimberlite@...]
Sent: Saturday, July 21, 2012 6:27 PM
To: amelyachtowners@...
Subject: i hope this fixed it
|
By
Sailormon <kimberlite@...>
·
#11281
·
|
|
(No subject)
web test
By
kimberlite@...
·
#11280
·
|
|
test 4
test 4
By
kimberlite@...
·
#11279
·
|
|
test xxxx
By
eric <kimberlite@...>
·
#11278
·
|
|
test do not reply
By
Sailormon <kimberlite@...>
·
#11277
·
|
|
it only works from here
If i send an email from the amel site the subkject and my user name show up. does anyone have a help email or phone number for Yahoo?
thanks
eric
If i send an email from the amel site the subkject and my user name show up. does anyone have a help email or phone number for Yahoo?
thanks
eric
|
By
eric <kimberlite@...>
·
#11276
·
|
|
test
By
Sailormon <kimberlite@...>
·
#11275
·
|
|
test do not reply
By
Sailormon <kimberlite@...>
·
#11274
·
|
|
amel changed the seals
Sometime in the last 4 years I believe Amel changed the seals.
Kimberlite a2002 model originally came with one type of foam seals now
there are 2 types in the last shipment.
Fair Winds
Eric
Amel
Sometime in the last 4 years I believe Amel changed the seals.
Kimberlite a2002 model originally came with one type of foam seals now
there are 2 types in the last shipment.
Fair Winds
Eric
Amel
|
By
Sailormon <kimberlite@...>
·
#11273
·
|
|
Re: strange emails from you via the Amel yahoo group
Hi RUTH,
I Can not figure why this is happening.
I receive my email with the subject and my correct yahoo address; however
when I go the Amel site it shows unknown sender and no user name.
I am
Hi RUTH,
I Can not figure why this is happening.
I receive my email with the subject and my correct yahoo address; however
when I go the Amel site it shows unknown sender and no user name.
I am
|
By
Sailormon <kimberlite@...>
·
#11272
·
|
|
test- do not reply-thanks Eric
By
Sailormon <kimberlite@...>
·
#11271
·
|
|
Re: [Amel] Re: Lofrans Tigres motor replacement
Good day Gene,
The switches are located only a few miles away from me in the UK.
Here is a link to the website.
http://www.polevolt.co.uk/acatalog/Push_Button_Switches.html
The PBS4 is
Good day Gene,
The switches are located only a few miles away from me in the UK.
Here is a link to the website.
http://www.polevolt.co.uk/acatalog/Push_Button_Switches.html
The PBS4 is
|
By
GrahamJohnston42 <grahamjohnston42@yahoo.com>
·
#11270
·
|