|
Re: [Amel] Wintering pure magic in the USA
Peter, Last winter Boston got hammered with several feet of snow all winter, while here on the Chesapeake the last few years we had maybe 1 or 2 inches or none at all. Its also further north thus
Peter, Last winter Boston got hammered with several feet of snow all winter, while here on the Chesapeake the last few years we had maybe 1 or 2 inches or none at all. Its also further north thus
|
By
Patrick McAneny
·
#14205
·
|
|
Re: Interphase Sonar
Thanks guys
My email to Interphase got bounced, but yesterday I went on their site again and they have a new tech support email : Interphase.Support@...
They have advise I need to replace the
Thanks guys
My email to Interphase got bounced, but yesterday I went on their site again and they have a new tech support email : Interphase.Support@...
They have advise I need to replace the
|
By
Alan Leslie
·
#14204
·
|
|
Re: [Amel] RE: mast mainsail furler foil
In speaking with Dave it is understood the boat is sold. There are several boat available here on the other coast mine being one of them. SM 209
Regards
Richard Piller
Cell 603 767 5330
In speaking with Dave it is understood the boat is sold. There are several boat available here on the other coast mine being one of them. SM 209
Regards
Richard Piller
Cell 603 767 5330
|
By
Richard03801 <richard03801@...>
·
#14203
·
|
|
Re: [Amel] Fresh Water Tank Paint Repair
Had the same problem!
After much discussions and discovering that what was peeling was not paint but finish resin, I had all chips removed and, after a torought washing, with acetone and rinsing
Had the same problem!
After much discussions and discovering that what was peeling was not paint but finish resin, I had all chips removed and, after a torought washing, with acetone and rinsing
|
By
Serge Tremblay <laetitiaii@...>
·
#14202
·
|
|
Pacific Amel?
Hi, does anyone know of an Amel available for sale at the Pacific coast?
Hi, does anyone know of an Amel available for sale at the Pacific coast?
|
By
aersolkid@...
·
#14201
·
|
|
Re: mast mainsail furler foil
Hi,
I am looking for Dave Benjamin to fin out if Exit Strategy is still in the market.
thanks
Raul Romero.
Hi,
I am looking for Dave Benjamin to fin out if Exit Strategy is still in the market.
thanks
Raul Romero.
|
By
aersolkid@...
·
#14200
·
|
|
Re: [Amel] Wintering pure magic in the USA
Ops sorry about that
Hi Peter
We are in Lake Ontario
With our Sharki
What part of Canada will you be visiting?
Ops sorry about that
Hi Peter
We are in Lake Ontario
With our Sharki
What part of Canada will you be visiting?
|
By
Fisher, Thomas W.
·
#14199
·
|
|
Re: [Amel] Wintering pure magic in the USA
Hi Peter
By
Fisher, Thomas W.
·
#14198
·
|
|
Re: [Amel] NMEA OUT from B&G 2000
Lior,
I do not believe that the Main Processor has NMEA output.
You need to get NMEA from the cable that connects the HYDRA Display (FFD). This is the cable from the FFD to the Hydra processor.
The
Lior,
I do not believe that the Main Processor has NMEA output.
You need to get NMEA from the cable that connects the HYDRA Display (FFD). This is the cable from the FFD to the Hydra processor.
The
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#14197
·
|
|
Re: [Amel] Wintering pure magic in the USA
Many thanks Eric and Kent. Much appreciated.
Peter
Many thanks Eric and Kent. Much appreciated.
Peter
|
By
peter killen <peterkillen@...>
·
#14196
·
|
|
NMEA OUT from B&G 2000
Hi
I try to get from the main processor unit of the H2000 NMEA out.
I would like to get the wind information on my computer and on the furuno plotter.
In the manuel of the H2000 it is written that it
Hi
I try to get from the main processor unit of the H2000 NMEA out.
I would like to get the wind information on my computer and on the furuno plotter.
In the manuel of the H2000 it is written that it
|
By
lior 555 <lior246@...>
·
#14195
·
|
|
Re: [Amel] Sonic speed
Hi,
From one santorin owner to another...contact Tinley electronics in UK.( you may find reports on the forum or Google them ).
The modern version has an adapter for the paddle wheel and we could use
Hi,
From one santorin owner to another...contact Tinley electronics in UK.( you may find reports on the forum or Google them ).
The modern version has an adapter for the paddle wheel and we could use
|
By
Chris Smither <yachtakwaaba@...>
·
#14194
·
|
|
Re: [Amel] Sonic speed
I bought this from Tinley Electronics:
NMEA Paddlewheel
The NMEA Paddlewheel converts NMEA from either a GPS or electromagnetic log to a paddlewheel output suitable for connecting directly to an
I bought this from Tinley Electronics:
NMEA Paddlewheel
The NMEA Paddlewheel converts NMEA from either a GPS or electromagnetic log to a paddlewheel output suitable for connecting directly to an
|
By
Bill & Judy Rouse <yahoogroups@...>
·
#14193
·
|
|
Re: [Amel] Sonic speed
Hi Antoine,
also my Santorin has a sensor broken.
To change it B&G representative in Trieste, IT, requires a couple of thousands of Euros, alternatively he proposed to drill another hole in the hull
Hi Antoine,
also my Santorin has a sensor broken.
To change it B&G representative in Trieste, IT, requires a couple of thousands of Euros, alternatively he proposed to drill another hole in the hull
|
By
Siviero Attilio <attilio.siviero@...>
·
#14192
·
|
|
Re: [Amel] Wintering pure magic in the USA
By
kimberlite@...
·
#14191
·
|
|
Re: [Amel] Wintering pure magic in the USA
Brunswick GA is the westernmost place on the East coast , just N of the Florida border and N of 31d. It's pleasant in the spring, Fall, and winter and very hot and humid in the summer, but because of
Brunswick GA is the westernmost place on the East coast , just N of the Florida border and N of 31d. It's pleasant in the spring, Fall, and winter and very hot and humid in the summer, but because of
|
By
karkauai
·
#14190
·
|
|
Fresh Water Tank Paint Repair
In the process of power washing our water tanks, we found that the paint is chipping off in a number of areas. Does anyone have experience with patching the chips? I have no interest in recoating
In the process of power washing our water tanks, we found that the paint is chipping off in a number of areas. Does anyone have experience with patching the chips? I have no interest in recoating
|
By
svcharisma@...
·
#14189
·
|
|
Re: [Amel] Interphase Sonar
Interphase was purchased by Garmin. They are very responsive to
questions asked via their tech support:
http://www.interphase-tech.com/
I would check with them to see if a replacement cable is
Interphase was purchased by Garmin. They are very responsive to
questions asked via their tech support:
http://www.interphase-tech.com/
I would check with them to see if a replacement cable is
|
By
Mark Erdos
·
#14187
·
|
|
Sonic speed
Hi all,
Have somebody replace sonic speed sensor forward and toward the hull?
How to do ?
Thanks.
SM 192 Antoine
Hi all,
Have somebody replace sonic speed sensor forward and toward the hull?
How to do ?
Thanks.
SM 192 Antoine
|
By
tatane88 <antoinefeltz@...>
·
#14186
·
|
|
Wintering pure magic in the USA
I am hoping to arrive in the USA sometime during the month of may 2014 and hope to winter Pure Magic somewhere along the coast north of 31degrees. Given that I cannot leave the boat in the states for
I am hoping to arrive in the USA sometime during the month of may 2014 and hope to winter Pure Magic somewhere along the coast north of 31degrees. Given that I cannot leave the boat in the states for
|
By
peter killen <peterkillen@...>
·
#14188
·
|