100% agree …. The forum should be used to voice both good and bad experiences with vendors, preferred or otherwise SV Rascal Sm 404 En route Rodney Bay Sent from ProtonMail for iOS

You can order them from Maud at Amel, I did exactly that a few months ago. Regards, Arno Luijten SV Luna, A54-121

John, The photo sent by Bill (of the charred pump motor windings) looks like the one I sent him from SM#207. I also experienced intermittent problems prior to the complete failure of the pump. My

As a potential buyer I study this forum with great care. There are two sides to this. I fully agree with Bill's approach of preventing someone from using the forum to grind an ax. On the other hand

Hi John, We had a similar problem. It turned out to be some loosening of the forward-most screw holding the metal strip above the glass (outside). I’m not on the boat and don’t know for sure if

Hi Carina, Try this company. https://froid-regis.fr/index1200-eng.html Web page is a bit chaotic so good luck with search. I found there fridge lock. Best Regards, -- Vladan A54 #157 SV PAME

Does anyone know where I can buy a new lock for the freezer in our Amel 54 -- Carina SV Ultimo Amel 54 No 165

Hi guys, I remember a while back when Ken had an issue with a contractor I believe somewhere in the Caribbean and he proceeded to mention it here to the forum. At the time I didn’t think anything

I also agree with Ken, Feedback is important both positive and where a company/contractor may learn. It’s ok to put this feedback out on personal blogs, YouTube etc but not ok to provide the

Let me preface by saying, of course, massive thanks to Bill for the incredible work that he does to run this forum and promote Amel in general. I gotta say I agree with Ken. One of the (if not THE)

Hi Bill, you do a great job in this wonderfully and helpfully board. And yes, I‘m completly with your post. Best wishes Ralf Sharki Baghira #42 AUGUST KUHFUSS Nachf. Ohlendorf GmbH, Münchenstrasse

I think it comes from the hole for the security rope for the forward locker...your locker seals are not sealing..... Ask me how I know this! Cheers Alan Elyse SM437

Hello John, I had a problem on my Sharki, that sounds like yours. It was a tube for the cable from the windlass and navigation lights to the electronic board on the portside. This tube wasn‘t

Good advice, as always, Bill. Thanks. Victor

I have slight moisture ingress into the top of the port cupboards in the forward cabin. I don't think its the windows as the leak is forward (and uphill) of them. moisture is evident from open

John, It could be so many things. Let's try the most common cause of a short or ground fault. Is there any sign of saltwater leaks around the Saltwater pump? That may look like this inside the green

I had my fuel polished by a dock side filter operator. He circulated all the fuel though his truck mounted filters. He used three grades of filter, course, moderate and fine progressively removing

In my view, Bill leads the idea of independence in thought and experience. Please continue without change. J Disclaimer The information contained in this communication from the

Victor, Many of us have had experience with Silicone in the form of PropSpeed and with PropSpeed: It is critical that it is installed correctly or it will not work. If installed correctly it works

All, I am really proud to be a member of this group and very happy to be associated with each of you. Today marks my 16th year with the Amel Yacht Owners Group. There are plenty of members who will