|
Re: [Amel] Info on SM sunk in Grenada
Hello Ken,
I was the owner of the SM that sank in Grenada. She was new in June 2000
so not the one you are looking at. The anchor rode was not involved. The
bow thruster fell out of the boat due to
Hello Ken,
I was the owner of the SM that sank in Grenada. She was new in June 2000
so not the one you are looking at. The anchor rode was not involved. The
bow thruster fell out of the boat due to
|
By
Ian Shepherd
·
#9999
·
|
|
Re: [Amel] Amel '93 manual
Thanks - we'll let you know if we find any manual specific to the '93 model(s).
Kind regards,
Deb & Mike
________________________________
To: amelyachtowners@...
Cc: Buttignol ssa
Thanks - we'll let you know if we find any manual specific to the '93 model(s).
Kind regards,
Deb & Mike
________________________________
To: amelyachtowners@...
Cc: Buttignol ssa
|
By
Deb Winther <wintherdeb@...>
·
#9998
·
|
|
Re: [Amel] Amel '93 manual
I have a Santorin '93, and the only manual I found, in 3 languages IT EN FR, was for SM2k, nothing else. I do not think your '93's SM FR Manual is much different. Anyhow I have all of them, if you
I have a Santorin '93, and the only manual I found, in 3 languages IT EN FR, was for SM2k, nothing else. I do not think your '93's SM FR Manual is much different. Anyhow I have all of them, if you
|
By
Attilio Siviero YAHOO <attilio.siviero@...>
·
#9997
·
|
|
Amel '93 manual
Hello
We recently purchased a SM 1993 and are eagerly getting to know her systems. She came with several manuals in French which we are attempting to read through but our French is a bit rusty. Does
Hello
We recently purchased a SM 1993 and are eagerly getting to know her systems. She came with several manuals in French which we are attempting to read through but our French is a bit rusty. Does
|
By
wintherdeb <wintherdeb@...>
·
#9996
·
|
|
Re: [Amel] Info on SM sunk in Grenada
There was a boat that fell off the jack stands in and had some other issues in the North West but it was not this boat.
Good luck with your "new" boat..
Should you have any questions please feel free
There was a boat that fell off the jack stands in and had some other issues in the North West but it was not this boat.
Good luck with your "new" boat..
Should you have any questions please feel free
|
By
Richard Piller <richard03801@...>
·
#9995
·
|
|
Re: [Amel] Info on SM sunk in Grenada
Not the one you are looking at.
All the best,
Joel F. Potter
Joel F. Potter - Cruising Yacht Specialist, LLC
Amel's Sole Associate for the Americas
Mailing Address: 401 East Las Olas
Not the one you are looking at.
All the best,
Joel F. Potter
Joel F. Potter - Cruising Yacht Specialist, LLC
Amel's Sole Associate for the Americas
Mailing Address: 401 East Las Olas
|
By
amelforme
·
#9994
·
|
|
Info on SM sunk in Grenada
Hello, I am in the process of buying Geisha a 1994 Super Maramu (SM116). I was warned about a SM that was sunk in Grenada when the anchor rode fouled the bow thruster. Does anybody know anything
Hello, I am in the process of buying Geisha a 1994 Super Maramu (SM116). I was warned about a SM that was sunk in Grenada when the anchor rode fouled the bow thruster. Does anybody know anything
|
By
Kenneth <kenhduncan@...>
·
#9993
·
|
|
Re: SM Jib Swivel/Halyard Stuck at top of mast
Hi Ann-Sofie,
Good suggestion, thanks & will do,
Jim
SM384 Sirena Azul
Hi Ann-Sofie,
Good suggestion, thanks & will do,
Jim
SM384 Sirena Azul
|
By
assistanttoblackdog <atwaterfour@...>
·
#9992
·
|
|
Re: Amel Maramu 46
Thanks to all of you for your valued feedback.
Much appreciated
Andy
Thanks to all of you for your valued feedback.
Much appreciated
Andy
|
By
Andy Croney
·
#9991
·
|
|
Amel 46 draft
Hello
I cruised an Amel Maramu and Super Maramu twice in the Bahamas and
Caribbean. Incidently, I bought and sold both through Joel Potter, who
replied on this subject. You can believe almost
Hello
I cruised an Amel Maramu and Super Maramu twice in the Bahamas and
Caribbean. Incidently, I bought and sold both through Joel Potter, who
replied on this subject. You can believe almost
|
By
Jeffrey Rapp <rapp.jeffrey@...>
·
#9990
·
|
|
Re: Rigging replacement
Hi Jose,
At least on my SN (and SM's I've seen up close), yes the ACMO provided original rigging used metric cables and "standard" (inch - based) turnbuckles. Further, the turnbuckles are "Inverse",
Hi Jose,
At least on my SN (and SM's I've seen up close), yes the ACMO provided original rigging used metric cables and "standard" (inch - based) turnbuckles. Further, the turnbuckles are "Inverse",
|
By
Craig Briggs
·
#9989
·
|
|
Re: B&G and NMEA
Hello Jose,I just tried to read at different baud rate and the NMEA output
works only at 4800 bauds.
Hope it adresses your question
Alain
PILGRIM SM26
Hello Jose,I just tried to read at different baud rate and the NMEA output
works only at 4800 bauds.
Hope it adresses your question
Alain
PILGRIM SM26
|
By
Alain Feuillet <alainfeuillet@...>
·
#9988
·
|
|
Re: [Amel] SM Jib Swivel/Halyard Stuck at top of mast
Just a thought, if you don't get any good suggestions, contact Amel before you use the big hammer
/Ann-Sofie
S/Y Lady Annila
SM #232
To: amelyachtowners@...
From:
Just a thought, if you don't get any good suggestions, contact Amel before you use the big hammer
/Ann-Sofie
S/Y Lady Annila
SM #232
To: amelyachtowners@...
From:
|
By
Ann-Sofie Svanberg <kanalmamman@...>
·
#9987
·
|
|
Re: [Amel] Looking for SM2K
Hello Niels,
As far as Amel yachts available in North America, Joel Potter is the person
to see, as he has late model Amels for sale and currently has a 2003 Super
Maramu 2000 for sale that is very
Hello Niels,
As far as Amel yachts available in North America, Joel Potter is the person
to see, as he has late model Amels for sale and currently has a 2003 Super
Maramu 2000 for sale that is very
|
By
Kimberly Cerillo <kcvabeach@...>
·
#9986
·
|
|
Re: [Amel] Looking for SM2K
Hello Neals
A friend is selling his SM2K. It is in Denia, Spain.
I have been aboard last year, and I think it will be hard to find a better
one! It is worth a visit.
I don't know about price, and I
Hello Neals
A friend is selling his SM2K. It is in Denia, Spain.
I have been aboard last year, and I think it will be hard to find a better
one! It is worth a visit.
I don't know about price, and I
|
By
Roque
·
#9985
·
|
|
Looking for SM2K
Hello All
I've been lurking on this group for many years now. We sold our 46ft catamaran 6 months ago and are now seeking a cruising mono. We have narrowed our choice down to a Hallberg Rassy or a
Hello All
I've been lurking on this group for many years now. We sold our 46ft catamaran 6 months ago and are now seeking a cruising mono. We have narrowed our choice down to a Hallberg Rassy or a
|
By
niels <niels550@...>
·
#9984
·
|
|
Re: Amel Maramu 46
Hi Andy,
If cruising different tropical areas for me the Maramu's draft is not too much and not too little. I bought a 1981 Maramu last year and am very happy.
My previous yacht was a Southerly 115
Hi Andy,
If cruising different tropical areas for me the Maramu's draft is not too much and not too little. I bought a 1981 Maramu last year and am very happy.
My previous yacht was a Southerly 115
|
By
jjjk12s <jjjk12s@...>
·
#9983
·
|
|
SM Jib Swivel/Halyard Stuck at top of mast
Greetings Amel Sailors!
I was out sailing in a pretty good blow the other day and must have been a bit over-enthusiastic while tensioning the jib halyard because the lines securing the head of the
Greetings Amel Sailors!
I was out sailing in a pretty good blow the other day and must have been a bit over-enthusiastic while tensioning the jib halyard because the lines securing the head of the
|
By
assistanttoblackdog <atwaterfour@...>
·
#9982
·
|
|
Re: Rigging replacement
Just a little more info and questions on this topic.
As I am preparing Ipanema for a transatlantic passage this spring, I decided to replace its standing rigging too. It turns out, my SM2000 came
Just a little more info and questions on this topic.
As I am preparing Ipanema for a transatlantic passage this spring, I decided to replace its standing rigging too. It turns out, my SM2000 came
|
By
Jose Venegas
·
#9981
·
|
|
Re: B&G and NMEA
Keep us informed Alain. I checked my SM 278 and found it came with the NMEA FFD which I plan to connect via an AT10 NMEA converter to a new B&G Zeus Chart plotter that I just installed at the helm.
Keep us informed Alain. I checked my SM 278 and found it came with the NMEA FFD which I plan to connect via an AT10 NMEA converter to a new B&G Zeus Chart plotter that I just installed at the helm.
|
By
Jose Venegas
·
#9980
·
|