Hi Bill you mean this ? Maramu n. 211

Maramu #202 has a Genoa Swivel that needs replacing. It has a 52mm foil. Amel has a SM swivel that they say is for a 52mm foil. Has anyone installed a SM Genoa Swivel on a Maramu? Bill

We just renewed with Topsail for our 2nd year after Pantaenius left the market and Markel/IMIS wouldn't take us back because of "pandemic in Italy" despite our never having a claim, including the

Hello, We recently purchased a Maramu with a Nirvana Genoa furler, we are currently replacing the forestay because it cannot be inspected. We just pulled the old one out and it seems like Somme rubber

Hello Dieter, I confirm the seacock is installed the same way on a Sharki and on an SM, as Mark describes. If the seacock does not come off easily (it may be the original one!!!), you may help

Another bow thruster picture at factory:

Bill, I am not at the boat to check the fuse. The provided user manual is not specific to my boat. I visited the Amel factory several times, and I took the following picture of the bow thruster when

Paul, The last that I knew you were in the south of France, with plans to go to Sicily. I recommend that you contact the original manufacturer of the standing rigging and the standing rigging supplier

Mark, don't know if the seacock lamination is the same on sharki, but I also assume yes. Will try as you described, I think it will come off without removing GRP. Attached is the foto. Thanks

There isn't a photo attached to your message but I have recently changed this seacock on a Super Maramu. I am assuming that they are similar. The actual through hull is was glassed into the hull. The

Dear forum, on my Sharki the seacock of the toilet-out by the time has become harder and harder to open, now it is stuck in the closed position. From the foto it seems possible to remove the whole

Bonjour Paul, If you are based in south of France, I will recommend a company called Russo Yachting in La Seyne sur Mer, I just replaced the rigging, electric furlers and also new paint on the

Hi Scot The top photo taken from above. The next taken from side facing to starboard The bottom one taken from side but looking up a bit. The shield keeps the turbo heat away from the pipe work. Next

Hi Paul, Where are you located? Fair Winds Eric Kimberlite Amel Super Maramu #376 Kimberlite Amel Super Maramu #376

Hello Paul, I know a great rigger in NZ. He changed my rigging in 2 days at very reasonable cost He also rigs most racing vessels in the Bay of Islands area. Kind regards, Jean-Pierre Germain,

Hello, my name is Paul and I own an Amel 55 #17 (Fortuna II) Commissioned in February 2013. According to Pantaenius Insurance the standing rigging will require replacement for insurance purposes by

I was with Topsail for the last two years and were excellent to deal with. Recently not so much, a friend tried to insure his boat with them several months ago and ended up going elsewhere as I am now

Thanks Nick. You find that it works as well (if not better) than the original? I recall the service manual saying that it's imperative that the heat shield protects the oil feed and return pipes from

Very pleased with my policy. I am in Martinique. Chuck Lacey Joy 388 John R Hall Manager Anjo Insurances Woods Centre P.O.Box 104 St. John’s Antigua Direct Tel: 268 480 3060 Mobile

Hi all, while the twin rudders on the 50 may look more vulnerable I doubt if any rudder could resist an orca attack. It is notable that despite the impact on the rudders reportedly the hull suffered