I have a Mango since 1994. She is  perfect  condition, professional maintenence, and most of the esential parts are all new, eg.engine,generator, electricity,electronics,water pumps ... ready

ah the vagaries of language To: amelyachtowners@... Sent: Friday, 18 November 2011 5:48 PM Subject: Re: [Amel] Climma Heating   Danny, The manual states "klaxton." But, I am sure

Hello, I need to replace my 22 year old Feit pressure pump, Any experiences or opinions for the replacement? How high can I go in psi and gpm without taxing the system? Should I try to find a rebuild

Danny, The manual states "klaxton." But, I am sure that the manual was originally written in some other language and translated to English. The "klaxton" is definitely a thermo-switch that opens at

Kent,    Once, when we were stuck with a limited haul out window and had no Amel bow thruster foam seals, we bought some closed cell upholstery foam from a local upholsterer and cut that to size. It

Thanks Bill.  I found the RTV at Peakes.  I've already serviced the main prop shaft and have ordered two sets of seals for the bow thruster (I have one spare already that I'll put on when I get

Lars, If you are just interested in the older style, the era you are considering (1980's) has a Sharki at 39ft, a Maramu at 46ft (sometimes called 48ft but the same boat) and the Mango at 52ft. They

Hi Don't know where it may be located but a klaxon is a loud noise producing horn eg a motor car in English it has a horn, in some european languages it is called a klaxon. regards Danny SM 299 Ocean

Hi Serge, I have Mango hull # 50, with Nirvana rigging, with 4 electric furling of Genoa, Ballooner, Trinquette and Main, Gen set Lamborghini 8kw, 3 alternators (2 for 12v and 1 for 24v), etc., but

Hello Lars, I think the answer is that Amel used to build one type at a time and that they started with a small vessel which grew in length with each new model thus enabling them to incorporate more

Just a reminder that oil lip seals and bearings are available at stores specializing in them and any machine shop would tell you where they can be found. The machine shop can also turn up a

Thanx for all the answers! Its my fault, that I didn't describe the reason for my question. My wife and I are considering a used Mango for a tour around the world. I guess we will start in the

Hello Judy and Bill, Just a reminder to the other owners that the capacitors cost about about 60 euros each from Climma and four or five euros from an electronics store. I had some capacitors tested

That is the tool mister art. eric kimberlite

Spent about a half hour on-line at JC Whitney looking for the paint striping tool mentioned in various posts on the subject dated around 2006. I finally got an on-line sales associate to confirm what

Kent, RTV Silicone (Room Temperature Vulcanization Silicone) is a type of silicone rubber sealant. You will find it in a tube at Budget Marine. Contact cement will suffice for the foam seals, but

The top item on my punchlist is a new bimini set up for Dreamtime II. I would like to know how other owners would build a new system. I had a unique system for my old boat that created a sun

Hi, Bill.  I have read those files and they are extremely helpful.  The drive disengaged from the motor without a problem.  I am actually on the hard and was using the 'tool' because I'm by myself

Thanks Richard.  The Allen screws that hold my shaft to the motor are too l ong and have large heads that won't screw down flush with the outside of the shaft so that it can slide down the trunk. 

Kent, The following is based on #387...since the bow thruster went through some changes/updates, I am not sure that it all applies to you, but I suspect that it does. Of the 3 foam seals, 2 are made