Eric, I think you will find this product to work well for this application (I find the aerosol yields the best results): http://www.plastidip.com/home_solutions/Plasti_Dip Best

Thank you, What Ovatrolpaint did you use? FairWinds Eric AmelSuper Maramu #376 Kimberlite From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of Ann-Sofie Svanberg Sent:

Ok Bill, just bought this one. I am still not sure it will fit the existing thread... will see! Thanks again for your great help! Have a great

Eric, I would push the bracket back in, to its original position and then drill say a 1/2'' hole alongside the bolt and then pour epoxy into the hole and let it set up around the bracket and bolt.

Hi Dimitris, I had similar problems with the Bamar furler, and it was repaired by the Bamar service in Marmaris, out of warranty. Also the electronic control box of this furler was very problematic,

I have the Amel 54 delivered new on May 2011 with the Bamar furler 2.02 for the genoa. I heard a strange noise and opened the front cover and I found out that there was a lot of brass particles which

Alex, This is the pressure switch that I bought and it fit with no problems. Getting it adjusted correctly was time consuming, but

Eric, If you remove the 4 nuts inside the rear lazarette which bolt the bumper to the hull, you can remove the bumper. There is probably also some silicone or Sicaflex holding it in place. Once you

Hi, Mi bumperhas pulled away from the support bracket inside and is now about 1 inch fromthe hull on one side. Any ideasas to how to fix this? FairWinds Eric AmelSuper Maramu #376 Kimberlite

I just added a page on my site with pictures. http://nikimat.com/fresh_water_pump_d_plate_pressure_switch.html --------------------------------------------

Update on the fresh water pump running, Bill & Miles were exact, there was some debris (or calcium) in the pressure switch area. So, I first Switch off the fresh water pump (from the 24 Volt

We renovated ours. Sanded, filled small cracks with sicaflex and took a part of a flat fender to mend a bigger hole. Then we painted with a rubber paint from Ovatrol. Our bumper became as

We lost our bumper in rough conditions crossing the Atlantic and I have been waiting for a new one from Amel for about 6 months now. Maud informed me (about 4 months back) that Amel were not happy

Hi All: I recently tried to buy a new bumper from Amel to have as a spare. Maud indicated that they currently do not have any inventory of this item. I told her that my observations of other Amels

Ian, I used a regular tap and die set to drill and tap the hole. Then you can use a regular machine screw. A metric tap and die set is a must have tool for Amel owners. If you want to add something to

Thanks, John, When you say you tapped the other two holes are you saying that you used self tapping screws, without nuts ? Cheers, Ian & Judy ,Pen Azen, SM 302 To:

I would have done white, but they said that black had better UV resistance. So it will last longer. Sent from Yahoo! Mail on Android

Ian, I replaced both of my toilet bases with the new style base. As I recall, I could only get one of the new base holes to line up with the new base, so I drilled and tapped 2 new holes in the

Hi Jason Thanks a lot for the pics. it looks really good but i would like to have it in white. I also saw that they offer a net also in white. thanks again for the pics Lior ---In

Viet, The last price Amel had for that bumper was Euro 550 plus tax and carriage, that was two years ago. Regards, Trevor Seafever SM 425 Ireland ---In amelyachtowners@...,