Hi Veit, Here is a link to a posting regarding the bumper. It is much less expensive to explore local fabrication options and is not too difficult to manufacture/repair.

Hi Vite try sanding and painting it. That is a very costly part from Amel. Regards Richard Piller Cell 603 767 5330

Ok, more pics are up. When I ordered I was not sure what the # values meant. This is just how net manufacturers size their nets. #60 translates to 3.5 mm netting. Plenty big in my opinion. I

Hello All: Tried to search for this topic - no luck. We're thinking about replacing the rear bumper on our SM 215. Any tips on buying this from Amel or ? Thankful for all tips. Cheers, Veit ATMAN -

I put one pic in the photos section. I will take few more to give an idea of build quality. Sent from Yahoo! Mail on Android

dear jason i realy would like to know how it comes out and what kind of net you have ordered. we have two small children and really need a net on the boat. it would be great if you cuold post more

Aersol, Total Yachts Services, Mazatlan, Mexico have a 2004 Super Maramu Redline with an extensive parts and equipment inventory . Regards, Trevor Seafever SM425 ---In

Finally found a perfect and inexpensive place to get safety netting for boats. A site www.ondecksports.com. They sell netting for different sports, but make custom sizes. I got 2'x 120'. Of

You might still be in time to get a space at Porto Turistico,Marina di Ragusa in Sicily for half that price for a longer period.It is a firstclass marina and I believe that Ryanair has just started

If not, I think you could cut one. Kent

Thanks, Kent. If there is a similar hole on Pen Azen that will solve everything. I am not on the boat at the moment so can't see. I would not be surprised if there is such a hole as you just

Thanks, Rink. I only checked with Jabsco UK , but will now try the .com site. Cheers, Ian and Judy, Pen Azen, SM 302, Ragusa > To: amelyachtowners@... > From: rinkdehaan@... > Date: Fri, 4 Oct

We spent a few days in Port Napoleon. Had the boat lifted to replace prop oil seals. Good yard, plenty of services, nice restaurant. Transport is the only difficulty. Taxi to airport expensive, but

Hi Greg! If you would like a wet slip in Nettuno, SW of Rome, and in a very convenient geographic location, with a mild winter, my husband had two slips. The smaller one would nicely handle your

Ian We tried to get to the bolts on the forward head by cutting a piece of the front plate out. The size was the width of my hand. When I tried reaching in there was a large block of wood in the way

Hi Ian and Judy, Before you going to undertake that venture I would double check the availability of that part. We changed ours just 2 years ago and it was stil available. I just looked at the

I think you're going to have to drill a new hole/holes, then remove the base (which you used as a template) and glue/epoxy a large washer and nut at each hole underneath the flooring (on Kristy there

Thanks for everyone's thoughts on winter hardstanding. I've spent this year in the Golfe du Lion and I now understand its well deserved windswept reputation. I'm trying to go further east next year,

I had a little attach (where the bolt) go through broken on my base, I looked, looked, called and called again and was not able to find the proper replacement part, so I just glue the broken part

Hi y'all, Pen Azen is now 13 years old and the base of one of the toilets has developed a crack and is not long for this life. By the base, I mean the plastic part which is bolted