Hi Gary. I got the Honey Beige Berber made by Shaw. It has a wavy-looking rubbery-feeling backing and is made for marine use. I had them put velcro where there was velcro on the old ones, but I'm

Hi All: On my last trip I noticed that the sea chest obstruction alarm didn't sound when I filled the toilet with sea water with the sea cock closed ( my normal test of this sensor ). Testing the

Dear all: My boat has the Amel installed SSB system. There is a 4 inch wide copper strap laminated into the hull in the aft lazarette that runs to two Dynaplates on the rudder skeg. The copper

Hi Kent: I googled the "honey beige marine carpet" and found several vendors. Was yours rubber backed like the original or did you have to use double sided tape to keep it from slipping etc. Gary

The carpet was about $250 and the fee for cutting and edging was $440...almost $700 total. ________________________________ To: "amelyachtowners@..."

Kent: are you sure about the $600 all in? Or was it $600 for the carpet alone + work? Cheers, Veit Sent from my vm iPad [Non-text portions of this message have been removed]

I found a print of Kristy's awning and took a pic of it to post in the photo album KRISTY SM243. That's why the quality is poor. In this photo the side panel of the center section is rolled up on

Hi, Scott, I have scoured every photograph I have of Kristy and can't find the ones of the awning.  Sorry, I'll take some more next time I put it up, but that may be months from

Hi, Veit. The per square foot cost of the Honey Beige berber carpet by Shaw is between $8.50 and $9.50 on all the sites I looked at.  Can't remember now which one I used.  The cost of the carpet

Hello Kent: could you please advise where you actually purchased your carpet - any experience to date? We are trying to replace ours as well, local quotes are well above the $600 you

Hi there on 184 we had Euro ceramic fuses. You can fond them at auto supply stores that specialize in European cars. Not you local Pep Boys or Autozone. Regards Richard Piller Cell 603 767 5330

The turning block on the end of my main boom was replaced with a modified ronstan block and is in need of replacing. could someone tell me the make,model,size of the original block.My SM is #123 a

Jer, I have a slightly older Maramu than yours. I'm pretty sure the brand is Diruptor like later boats. I haven't got new ones but suggest you try typing Diruptor in the search box. John Maramu

So strange that didn't answer you. Did you send your email to sav@...? We ordered a new prop to the bowtruster 2 weeks ago, they answered after just a few days. Othervice, call them and ask for

Hey there, quick Q: Has anyone found a supplier for the old electrical panel fuses on the original Maramu (near companionway ladder). We've blown one and have reached out to Amel via email 3x with

Hi Danny, thank you for your reply. Can you please direct me to the post for your awning on Ocean Pearl? Hope you are Fijiward by now! Scott and Diane.

Hi Kent, Denny, and all else who took the time and thought to reply - thank you. Kent - can you please post pics of your awning, as well as bimini/dodger. It will be great to have an idea in mind to

Thank you so much Rink :) Maria Geiger S.Y. PITU SM #148 [Non-text portions of this message have been removed]

Hello Maria, We can share some of iur experiences. We stayed in Didim, Leros and Aghios Nikolos. All of them are fine marinas. Crete has the best climate for the winter and is a lovely island. The

Thank you so much Ann-Sofie, we will have a look to this marina... I didn't think about Crete but why not? Thank you again and have a nice summer, Maria Geiger S.Y. PITU SM 148 [Non-text