Good points Richard...will take note Cheers Alan SV Elyse SM 437

Hello Drew, I do not understand your problem. Thedrive unit in the aft cabin is easily removable as it is only held in place bytwo spring clips. I serviced mine on my last boat after it had done

The brushes on the Linear Drive autopilot an SM390 need replacing. Access to one is located under the drive piston and cannot be accessed easily. I see no simple way to rotate the motor so that the

Andy be very careful when drill the holes the mast remember to unroll the main and be sure there are no rivet pins or sharp edges on the inside. Regards SM 209 in Newport Richard Piller Fairbanks

All, With the previous yahoo.groups when a message had been opened its title was greyed, which provided an easy way to navigate through the group. Now it is not anymore possible. Did some member find

Bill, I am a new Amel owner (SM2k #400 "Brava") but have been following this site for several years and find it to be extrememly useful - or it has been to date. I would certainly be willing to

Hi Tom Very many thanks for the links. I much appreciate the information which is really helpful Best wishes Peter s/v pure magic 433

B&G NMEA is 4,800 baud. I think you might want a NMEA Multiplexer like this one http://nolandeng.com/am43.php or this one: http://nolandeng.com/nm42.php On the Furuno Data 4 can be IN or OUT see your

On 17 Sep 2013, at 14:34, "Fisher, Thomas W." <fishert@...> wrote: Hi Peter, A boat that I shared a dock with for a couple of seasons where from Halifax. They are now in Guatemala up

All, If you have not noticed: 1.) We can no longer search messages for any unique word...we can only search for a particular message number. I am not sure what good that will do anyone. 2.) We can

Hello Eric, no problem i will give you a ring. Have a nice time in Budapest. Regards, J-Pierre Massicotte Amel Santorin #51, Vanille

Hi Peter, A boat that I shared a dock with for a couple of seasons where from Halifax. They are now in Guatemala up the Rio Dulce. I sent them an email, there suggestions are attached. Budget

Hi Bill I remember now that the FFD was wired with the furuno but the furuno could not understand the data flow. It came somthing but unusable. I cannot check now how it was exactly wired. I did not

Hi Andrew, Just saw your message. I'm doing exactly the same thing. Elyse has a staysail on an inner forestay (factory fitted) and the halyard goes through a clutch on the main mast. I'm going

I can pick it up in early to Mid october. I'm in Virginia. We just bought our boat. I'm in Budapest currently but will be back this week (thurday) Give me a ring 317-225-5876

Hi Thomas, We plan to head up the coast of Canada in the latter part of august for about three weeks, before returning to the USA for the winter. I had hoped to overwinter her near Halifax but had

Yes, just a thorough cleaning, there seems to be a number of coats of resin! Serge

Serge, do I understand you correctly that you did not repair the finish, you just removed all the loose chips? Alan s/v Charisma Mango #62

Don't you just LOVE this forum? Ian...you da MAN! Has anyone pursued a different forum that would serve our purposes better...ie our own web site, or other blog type forum that would work as well or

Hi Mike and Chris, I am interested in your reply but don't fully understand it. Are you saying that you changed from Sonic Speed to a paddle wheel and that the paddle wheel was fitted while you were