the display unit says: No sensor found. Unlike the Super Maramu, the sensor on the 54 does not appear to be visible? Or am i looking at the wrong place. Any help will be aprreciated. Thanks. JP

Bruce and Diana, Congratulations! John, Maramu #91, Popeye

Hi Bruce, Congratulations! From everything I saw on the internet and from a conversation with the broker, Morning Dove seems like an outstanding Maramu and it was an excellent price. Our boat, Exit

Hi Amel owners, We're so glad to see that Amel owners are really proud of their yachts and we're looking at them seriously for our family of four to go long term cruising. Can anyone do a "hard

Welcome aboard. Glad you got an Amel. Regards Richard Piller Cell 603 767 5330

Welcome to the family Bruce and Diana! You won't regret your decision to buy Amel. We look forward to hearing from you and hooking up in some topical bay for stories and a glass of wine or

Hello all AMEL owners and lovers of these great sailing vessels. I joined this site because of my interest in these boats and wanting to learn more. It wasn't long before I knew this was the vessel

Check your e-mail :)

Good morning Fernando, I have an SM2K, so not sure if it is exactly the same as yours; My tape measure is in inches... 1" is 2.54 CM   The top part (include the back end) is 32" Lenght by 37"

Does anybody send me the exact dimension of the supermaramu navigation table? I am away from my boat and need the size of the navigation table and of the opening cover of it. Thanks in

Hello Craig, Many thanks for your excellent posting of 12 April 2013. I had just bought a new wearing ring from Amel which was,as you said, very expensive probably because of the courier charges. One

Take a look at the photos in this album: http://groups.yahoo.com/group/amelyachtowners/photos/album/364756240/pic/list?mode=tn&order=ordinal&start=1&dir=asc You will find some information about the

We have the factory installed second freezer. It does not use a dijonctuer on the 24V board for the standard freezer. It has a separate board. It is completely independent from the standard freezer

We two would be very interested in any / all information regarding this. The dijonctuer is already in the 24V board Alan/Judith SV Elyse SM2K #437 Noumea

Has anyone installed a second freezer under the salon seat opposite the factory installed freezer? Any plans or pictures/procedures would be appreciated. Terry/Dena SV Libby #196 San Diego

Hello everyone. I have a Amel Euros 41 that I recently painted (hull and deck both), revised the engine (it will have changed the four pistons and have put new gaskets) and has been completely

All, Our friend, Jimmy Cornell, founder of the ARC (Atlantic Rally for Cruisers), has scheduled two East-West Atlantic crossings for cruisers. 17 November 2013 from Arrecife, Lanzarote to Le Marin,

Many thanks, Eric. Regards Peter. S/V Pure Magic. [Non-text portions of this message have been removed]

There is a good drawing of the ground strap in the photos I made mine out of 1/8 " copper stock. You will need a number of extensions for your socket wrench to get 2 feet deep in the bilge to remove

Many thanks Kent. Regards, Peter [Non-text portions of this message have been removed]