Hello to all. I have been trying to find a source for the circuit breakers on my Super Maramu. They are the "Diruptor Brand" breakers used on the 24v and 220v panels. I am locing for a source in the

Hi Paul, Do you have a number where I could call you? If so, please email me at fhoudaille@.... Cheers, Fred ________________________________ To: amelyachtowners@... Sent:

Alessandro, If you have the part number, please post it. I want to compare it to the part number on #387. Bill BeBe, SM2k, #387

Glad you got it going. Please do not forget to clean out the broken bits in the heat exchanger. Soon or later they will give you trouble. Happy Sailing and NAPPY NEW YEAR TO ALL. Regards Richard

Fred I could arrange for the transaction before May. We have friends in CT and RI that could arrange pickuo. Paul LaFrance SV NOMAD SM # 362 Currently in Fajardo, PR To:

Hi Regarding my problem with Onan gen set I had fixed it and I thank you for your help. i changed the actuator and Onan didn't stop anymore BUT it sounded not good as well....so I looked for the

Beleive experience!   Replace existing leatherette is most efficienct and simple if after cleaning the bulkheads from residue with a wire brush on a grinder a new felt or cotton backed high quality

Best AND LASTING HOLIDAY JOY TO ALL. MY YOU ALL BE BLESSED IN THE NEW YEAR Regards sm 209 Richard Piller Cell 603 767 5330

For those of you that use a Windows computer to display navigation software, beware of moving to Windows 8. I recently bought a Toshiba Ultrabook for my Amel that was supplied with Win 8. Apart from

I just want to thank John, Alex. and Dave for their responses on this topic. You've given us a lot to think about. It will be a lot of work but certainly worth it.

Hi Paul, I'll check next time I am on the boat and will let you know then. Having said that, we are planning on heading out to the Med around mid May so if you do not anticipate to be in RI until May,

Fred We are currently looking at replacing our main sail with a North sail. We will be in RI in May. If possible please supply specs ie: cloth stitch material etc if you have the info. Paul

Dave, I have recently redone all the vinyl in my Maramu. After lots of research I decided new vinyl is the best off all finishing options including in the heads. The heads are one of the easier

Can anyone share information wether the KANZAKI KMH4A gear box that is supplied with some Yanmar engines can be used to run a shaft alternator like the Hurth gear boxes in the Amel Maramu?

Dave, An alternative for redoing the head bulkheads is to apply paneling directly over the vinyl, thereby avoiding the mess of removing the vinyl. We did that for both heads on Air Ops and it was a

Dave; We decided to change all the headliner and original material on the boat. It is a dreadful job. Joel Potter wrote on this sometime ago and issued some stern warnings. We discovered that the

Like so many older Amel sailboats, the vinyl headliners are failing in several places. In the toilet compartments we are considering just painting the bulkheads. Before we remove the vinyl, I thought

Hi all be very careful regarding engine rpm's over or under will change the voltage an Hz out put that may do other damage. Note the run position of the lever and mark it. You may also want to use a

All, There is some missing information in this thread because there were some private emails exchanged between myself and Alessandro. I am sure that there are a few of you that would like to see

All concerned, Alessandro emailed me directly and stated that he was getting a 33 code. He says that 33 is not in his owner's manual. I do not remember what codes are on the switch and in the manual.