Miles, A couple of thoughts: Did this happen after you set the injectors (it was working fine before). If so, I think I would double check that avenue first. If not: Does the prop turn

Hi Miles, The great RPM issue with the TMD22! I am afraid that I can't answer your direct question but I have to say I have always wondered why I could only get 2800 rpm out of mine. I had no idea at

After 14 years of no engine trouble, I recently had the injectors set to Volvo Penta specifications. (I also replaced the turbo, but it checks out). I now have very low power around 1800-2100 rpm's.

Alex, You may want to check with Navimo USA: 7455 16th St E # 107 Sarasota, FL 34243 (941) 360-1888 Mark SM2K #275 www.creampuff.us From:

Alex, go to the Reya website, there you will find a Reya HA 60 24volt 2.2Bar water pump which appears to now replace the original Amfa. The price is E 708 plus tax plus carriage, there is a

Does any one know, where I could purchase a spare AMFA fresh water pump as well as rebuild kit? Thanks in advance, sincerely, Alexandre SM2K #289 NIKIMAT Seabrook, Texas, USA

Good idea, sorry. Duncan From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of Joel F Potter Sent: Thursday, August 08, 2013 4:58 PM To:

Hi Kent, Thanks for the information on Morningstar marina. I am pretty familiar with the region, and used to do a lot of business with CSX in Jacksonville. If I were still a golfer…not doubt a

On my SM 140 Sula we have a remote Onan starting switch by the watermaker controls in the galley. The other day I noticed that the orange light in this switch was permanently on whilst the generator

Thanks, Eric.  Guess I need to find those. Kent ________________________________ To: amelyachtowners@... Sent: Thursday, August 8, 2013 10:36 PM Subject: RE: [Amel] Hose clamps-sail

Alex, The Pressure switch is a common water pressure switch made by Square D. I bought the one I used for replacement on eBay. If you are still in Kemah, ask someone to give you directions to a

Alex, I bought a rebuild kit from Amel. In 2011 you could buy it at http://www.reya.com/shop.php I am not sure that it is still available there. With care, that pump will last 3 to 5 times longer

There are 2 hose clamps that connect the sail drive body to a big rubber hose under the sail drive. Then at the bottom there are 2 hose clamps that connect the hose to the fiberglass hull. I replaced

Duh, huh? Kent [Non-text portions of this message have been removed]

Don't forget the ones that connect the sail drive to the hull. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Hello RIchard, I was really looking for the same pump that I have now. Mine works fine, but will be travelling, etc. I already have a spare expansion vase. Isn't there some sort of adjustment on the

Hey Amel Folks. Please, change the subject line when the subject evolves so that searches will be useful in the future. All the best, Joel Joel F. Potter - Cruising Yacht Specialist,

Hi you buy an on demand pump from Jabsco or Shurflow that will work just fine without the tank. What pressure plate areyou refering to??? Regards Richard Piller Cell 603 767 5330

Clamp source by the box Jackson Hardware and Marine Kittery Maine 1 (207) 439-1133 Regards Richard Piller Cell 603 767 5330

Hi Duncan, She's at St Simons Island Morningstar Marina at Brunswick, GA. It's the farthest West place on the Eastern Seabord and hasn't had a class 3 hurricane since 1861. It's an easy in and out