Sailorsolution.com is a US company that have provided us with all our "indoor" LED lamps, If you let them know it is for an Amel SM they will send the right type. Hälsningar Ann-Sofie SY Lady

Pat, I think as long as the stainless sticks out a bit from the rubrail, I think everything will be ok. On my last boat painted dark blue, I just added the ss ½ round rubrail to the boat and it

They are available from anyone that deals with U.S.A. Imtra Corporation 30 Samuel Barnet Boulevard New Bedford, Massachusetts 02745 USA Tel. 1508995-7000 Fax

HI Where are you located? Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of Ann-Sofie

Try sailorsolution.com Hälsningar Ann-Sofie Svanberg Skickat från min iPhone 16 nov 2012 kl. 20:31 skrev "captain_cucumber_head" <mcerdos@...>:

Does anyone have a source in the USA for replacement bulbs for the Amel wall sconces? The bulbs in now are 24V 25W Base: DB BA15D with a tubular shape (t5) 16mm diameter and 55mm length. I have hunted

Does anyone have a source in the USA for replacement bulbs for the Amel wall sconces? The bulbs in now are 24V 25W Base: DB BA15D with a tubular shape (t5) 16mm diameter and 55mm length. I have hunted

Hi thanks for the invite. I am heading to mu son's place in the Boston area Tuesday mid-day for 10 days. Are you going back to Summit North. If you would like We can offer in the water Dockage in

Thanks Richard. That was indeed my plan. Just need to execute (properly) now. By the way, Zazen is in Annapolis (Back Creek at J Gordon's) until mid week next week and we'll be down there on

Eric, When I bought my boat it had a small section worn through by contact with a piling , fiberglass makes a poor rubrail. The rubrail is hollow and the glass is probably less than 3/16'' thick and

Hello Pat, Thanks so much for your pointer. This really does help!! I will contact them. You have a great day. Fred ________________________________ To: amelyachtowners@... Sent: Friday,

Fred, I have bought African maghony at Delaware Supply in Boothwyn Pa., that is about 20 minutes from Bear , a few miles over the Pa. line right off I-95. They will run it through a planner for you

Hi Fred. You may want to use the same method as used in the pilot birth. That would be easy safe and neat. Enjoy you journey. Regards Richard Piller Cell 603 767 5330 [Non-text portions of this

Oh my mistake. You must be referring to that small sitting area to starboard. That makes sense now. That would be a perfect spot for the baby.

Gary= The starboard was in a large sheet and not only filled the depth of the frbg. brown orange rail with silver tape strip but protrudes approx. at least ¼ inch beyond. Seapath Yacht Club in

Hi Dave, Thanks for your email. We have leeboards for all the berths but this little seating area was not originally meant for anyone to sleep on. It will however be big enough for our 2 year old and

I was thinking of using ½ round stainless steel and inserting it into the area with the silver tape. One from west marine is perfect and comes in , I believe, 12 foot lengths. Available from west

Did you look above the cabinet next to the bed to see if there is a leeboard stored up there? I didn't realize I had one when we first got the boat. If the SM is like the Maramu, it came equipped with

Dear all. I remind all members that we do not allow commercial advertisements. I will tap the messages and eventually I will ban the member if persists. Group Moderator

Hello, I am looking to put a leeboard behind the table in the aft cabin of our SM, so as to create a little berth for our 2 year old. Would anyone have a leaboard they are not using? I am trying to