All, You will find a CLUTCH fuse on the Raymarine computer that can be inserted in a 12 volt position or a 24 volt position. All current Raymarine clutches are 12 volt regardless of the voltage of

Hello Eric, I am in New London, CT with my Sharki. I am going to head south on Thursday or Friday this week. I would like to get together. Please give me a call. My cell is 603-315-9600. Thanks. Roy

Hi, Even on 24V drives the clutch is 12V and has its own connection to the course computer. That is probably the cables you mention. Fair wind! Lars Santorin #79 Salvagny lying The

Lots of good advise from the forum. I might add if you are going to Panama from the east coast you will be better off to skip the Caribbean unless you are going to cruise there awhile. Jimmy Cornell's

Bob We had the same problem and.did it a total of 3 times and it came free We followed the instructions from BeBe message #4804. We had to undo the one wire and then proceeded to drop within the space

I am in the process of purchasing a full Raymarine 7002+ autopilot installation to carry as a spare. All of the parts appear to be 12/24v switchable except for the Type 2 Long Linear Drive unit which

Dear Ed, David, Bill and All, We have the same problem with the bow thruster and have tried soaking with penetrating oil and pullıng down while lifting etc. We are hauling the boat in a couple

Kent, The photo is at http://groups.yahoo.com/group/amelyachtowners/photos/album/1949812811/pic/1820188209/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc Best, Bill s/v Bebe, SM2

The rocker switch on my Icom 24-12 converter is on the front of the Icom case and faces the wood cabinet door. I will upload a photograph of the inside of the right side door beneath the Nav Table to

Hi, if you are coming down long island sound, please drop by the Huntington Yacht Club as my guest. Lots of moorings and slips available plus lots of boating companies around the harbor. fair

Thanks, Craig.  I got it.  I decided to do it your way instead of using the swaged fitting on the shroud since it would have meant detaching the shroud from it's lower fitting to get the stop onto

Thanks again, Bill. This sounds like my setup, but there's a second Mastervolt 24-12 converter mounted starboard to the large black box on the right side of the cabinet. I cant find a rocker switch

Thanks Pat, we really appreciate the info. Kind regards Danny and Yvonne SM299

Hi Ric, thanks for the advice. We wil consider everything. Regards Danny and Yvonne SM299

I would reccomend sailing with Offshore passage opportunties from newport. Its a great source for crew, leaves from newport, & costs less. . Go to www.sailopo.com. I have been crew & get all my

Thanks Eric, the going to Virginia is not to get to the Caribbean, we have never been into the Cheasapeake and while we are on this sde of the world we want to have a look at it. Also on the way

Just my opinion but going to virginia to get to caribbean is out of the way. I would go straight possibly with a stop in bermuda. St Martin, simpson bay marina is fantastic . Very clean 24-7 security

Danny, The destination for the 1500 is Tortola and departs Nov, 2 from Norfolk Va.In the BVI you can haul and launch for about $10/ft. and storage about $10/ft./month at the low end and about

Thanks Eric. I ordered the same set up you have. Hopefully, I'll never need to let you know how well it works. Steve ________________________________ To: amelyachtowners@... Sent:

Danny&Yvonne, I did the 1500 from Hampton last year and have just signed up for this year, lots of benefits but the main thing for me is the crew list as I don't have many friends who can take the