When we replaced these sheets we made them two metres longer as the original lenth was inadequate when the other sheet was poled out. Following that terrble tale of someones arm being wrenched off I

Hello Tom, Having just been through this problem I have a few pointers. If a bolt has sheared off take the box to a machine shop and get them to drill it out and insert a Helicoil which will be better

What I meant to describe is the plastic insert trey for the sink...we use it to stack dishes to dry. It is labeled with "CER MAT" with a heart between the "CER" and the "MAT." Bill BeBe, #387

Does anyone know where we can buy a replacement for the plastic tray for the galley sink? It has "CER♡MAT" on each end of the tray. Best, Bill BeBe, SM2k, #387 Crete, Greek Islands

If you know where it is in SXM I will be there next week and take a look at it for you. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Does anyone know this boat? http://www.yachtworld.com/boats/1981/Amel-Maramu-Ketch-2116025/Caribbean/St.-Maarten-St.-Martin Any comments about this 1981 Maramu? Thanks, Russ

I think I was reading too many of the recent posts on this site, but since I bought the boat a year ago and hadn't serviced the gearbox I decided this relatively cooler weekend (in Annapolis) was just

After sending my Icom model 802 back and forth to Icom we finally received it back with it working 100 percent at the factory. When installed it still did not work, so we changed the antenna lead

I was so happy to receive the new "optional exhaust elbow for my Yanmar 100 hp engine last week. It is a beautiful casting probably weighing 12 pounds. Unfortunately, when Amel turned the intercooler

Hi Paul & Sue, Regarding your 2nd question and the vibration, I've replaced the mounts (happened to be in LaRochelle at the time so got them from Amel) and, although I've got a Santorin, I believe

Try Vetus Marine. I believe they are called hydro dampers, type mitsteun. They are in the catalog, page 127 next to the motor mounts. They have a distributor in North Carolina. John "Moon Dog" SM

Hi Ric, I'm sure Richard can help out and there are many posts on this DB about changing the lip seals on these "C" drives. Coincidentally, I doing mine today and the top seal is also leaking. The

Hi Paul and Sue, I think they are standard units made by Silentbloc, try their website for more info and local agents. Regards, Anne and John, Bali Hai, SM319

Ric I am in Annapolis give me a call. Regards Richard Piller Cell 603 767 5330 "brokerage beyond your expectations" [Non-text portions of this message have been removed]

I have a 1990 Santorin with a perkins 50. The transfer case is getting seawater mixing with the oil resevoir and now is leaking at the seal near the bilge. I cant read who makes it in ends with

We have SM #353 Indecent, we have a couple of different questions - 1. Has anyone installed after market screen/shades in the 4 hatches that the Super Maramu's have? The type with screens and shades

Have you checked with a mechanic to see if they're standard mounts? Maybe email or print out a picture to show a parts dealer? Hopefully they're standard mounts. I buy all my Yanmar stuff from

Our 2 aft motor engine mounts require replacement. Our engine is a 75 HP Yanmar. The mounts are the rubber donout type under the frame that supports the engine and drive train. We noted that these

The only similarity beetween the 2 is the rollbar. The Wasi looks like it's a tryangle piece of flat steel with a roll bar welded on. Where as the rocna has a bit more in the design with the flukes

David, This is very interesting to me because in the spring 2009, in New Zealand, we were aware of 3 yachts that had problems with Rochna's galvanizing flaking off. This was before the date stated