Hello all, I am viewing a Maramu with hull 69 next week. She looks awesome in the advert. Planning to go on with the purchase if visit is satisfactory. Is there anyone in this group who knows

Thanks Kent and Jim, Forgot to mention that actually have reached the locker after repairing the floor of the right forward locker as the wood was exposed under the epoxy...(was humid and the spare

Pao-San #88 Kent, Very interesting input regarding the chain locker----I had exactly the same problem---forward locker full of water. I sailed from Norfolk Virginia to Panama without realizing the

I'm finishing replacing the seal on my rudder stock and thought I'd add a few more notes. Hope this is helpful. * A 2-arm puller helped a great deal getting the quadrant off. Not sure how I would

Hi, Barb, Use this:  http://www.leroy-somer.com/documentation_pdf/notices_pdf/1621a_MEVA_en.pdf   Works for me. Kent SM 243 KRISTY

Hi, Belit, I own SM 243, and cleaned my chain locker out last Fall.  I thought the water drained outside the boat, but discovered that it actually drains through a hole in the bottom of the locker

I found the following msg 7416 - but unfortunately the link is broken is anyone else able to open this as it probably contains the information that will really help "The following is the installation

We had problem with a lot of water in left chain locker 1991 SM and after replacing the chain pipe (hawser) it was still filling with water and found that where the electrical cable goes thru to the

Hi Richard, Thank you - now that I realise it is called a gearbox I am onto it and have the relevant information and will be contacting machine shop to see what can be done. Thank you again. Barb

Hi, thanks for the info. When you look at the bottom of your chain locker there is or should be a 20 mm hole that attaches to a hose that runs through the boat to the bilge. Normally there is an

Hi Pat, reading your posts brings back happy memories of Amels gathering at the Annapolis boat show. Lot of water under our keel since, just clicked over 16000 miles. Cheers Danny

Santorin 1992

HI, what is the year and model of your boat that would help get you your answer Richard on SM 209 in Annapolis For Sale ________________________________ To: amelyachtowners@... Sent:

Hi once again, when cleaned my Chain locker earlier this week (highly recommended to do this - lots of surprises there) have found out that: 1. access is terrible - believe (hope) there is a good

Danny, Good to hear from you, we followed your progress as you sailed home last year. I drilled out rivets and the extrusion wants to easily come out.I had sprayed corrosion X in a few days

Hi please search this site there is lots of information on those motor gearbox items. Regards Richard Piller Yacht Brokerage Service above and beyond the expected" Walczak Yacht Brokerage Service

Dennis, Wasi tell me that they have NO Irish distributors. They do have the following in the UK. Marinox Uk Email Marinox@... or Tel 00447548928091 Mr Steve Whitehouse

Dennis, I have sent a note to WASI.DE the manufacturers of the Beugel anchor asking for UK and Irish distributor names. I will mail the response as soon as it arrives. Regards Deb

Hi, We have just taken off these two clutch assemblies from our 1991 Super Maramu and find they are in very bad state. The part No. is MVF44 with the Brand Bonfiglou. Anyone else had any experience

Hi Pat, a friend with a SM has just gone through the process of removing the extrusion. He had a rigger do the job. Screws and rivets removed and try as they may they could not separate the extrusion