Thanks, JeanLuc. I shall bear that in mind, though on this occasion, as I am away from the boat, the good Sergio is sorting it out for me. Incidentally, he sticks to a pretty basic rule which I have

I had on my 50A charger some problems, if you are able to repair electronic you can do, if not send it to the manufacturer. If you send it to the manufacturer*be VERY careful on my SM316 if

Ian, I sent mine to reya, They charged me about 125 US to fix it\ Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Hi Ian and Judy My Amel 54 Atica is in Spain too, and also I am inclined to agree somewhat with Rainer. But there are exceptions and Amel representatives in Spain Bárbara and Pol, who are with

Hello Ian and Judy, As my SM is in Spain too and I had to fix a crapload of stuff last year, I can only warn you about service, mechanics and electricions in Spain. 3000.- Euro for a charger is a rip

Thanks, Jochen and Traudl, I will have a look at that. Cheers, Ian and Judy, Pen Azen, SM 302, Spain

We replaced our charger with a Sterling pro digital 50 amps before we left Eurropean waters. Also accepts 90-260 Volts 50 or 60 Hz. Worked flawlessly ever since. They do make 24 Volts units as

Hi Anne and John, Thanks for that. I suspect that the Spanish distributor had his eye on the main chance--I have since found out that the modern replacement sold by Reya is priced by them at 851

Hi Ian and Judy, My boat is only a few weeks older than yours and has two chargers,30 and 50 amp.I had a problem with one and sent it back to Reya who repaired it and sent it back promptly and so far

Thanks, Richard. I will check out the Reya/Dolphin web site. If you happen to be on board in the next couple of days and can give me the model no. that would be great. Cheers, Ian and Judy, Pen Azen,

We replaced the Amel supplied chargers with one smart Dolphin unit that accepts 90 to 260 volts 50 or 60 cycle. It has worked well for the last 4 years both with shore power and the Gen set. We have

Joel, Thank you for your two replies, very useful. I have looked up the web site for Rydlyme Marine and have contacted them. There is a potential supplier in Tortola. Would you be abble to give

Hi Ian & Judy, yes it is the galley sink mixer tap. My second boat has a better model than the original (three before yours) in that there is a pull out flexible hose with a spray button that is

Hi y'all, An electricity spike in our Spainsh marina damaged our 25 Ah Dolphin charger made by Reya and fitted originally by Amel in 2000. The local dealer has now told me that the charger is

I believe that this is true here in France. When I first read it, I was a bit shocked, but I think it may be an EU-wide issue. I wonder if you could avoid this by a change of residence. There is

Dear Cotton Bay: How about adding some comments to your photos so we know what they are? In the Photos section you will see a comment window, Just type in some descriptive information. Or better

We did both with great success. Regards Richard Piller

For the latest regs you may want to take a look at "noonsite" on the web. They are very good with that kind of info. Regards Richard Piller [Non-text portions of this message have been removed]

Duh. I forgot to mention www.rydlymemarine.com <http://www.rydlymemarine.com/> for cleaning out the raw water system. I have prepared many experienced Amel boats for resale here in Fort

If your boat is like my 54 #14 you will find that the voltage coming out of the controller to the pump is indeed 12 volts. When put in a high load situation, as with a warm load of stuff in the