|
Re: [Amel] navigation bulb
Check with Dr Led on the web.
Regards Sm 209 for sale in Annapolis
Richard Piller
"Yacht Brokerage Service above and beyond the expected"
Walczak Yacht Brokerage Service LLC
2 Compromise
Check with Dr Led on the web.
Regards Sm 209 for sale in Annapolis
Richard Piller
"Yacht Brokerage Service above and beyond the expected"
Walczak Yacht Brokerage Service LLC
2 Compromise
|
By
Richard03801 <richard03801@...>
·
#8532
·
|
|
navigation bulb
good morning, I just bought an older Maramu, built in 1978, She is in good shape. just that the bulbs in the navigation lights are burned out. I cannot find a replacement bulb. the base of the bulb
good morning, I just bought an older Maramu, built in 1978, She is in good shape. just that the bulbs in the navigation lights are burned out. I cannot find a replacement bulb. the base of the bulb
|
By
sjors prins <sjorsprins@...>
·
#8531
·
|
|
Sail in the Med
Hi,
Any Amel owner who can sail my SM from Corfu/greece to Southern Spain this summer- alternative from Sicily. Boat is ready in Corfu approx 15-20 May.
Ivar
Hi,
Any Amel owner who can sail my SM from Corfu/greece to Southern Spain this summer- alternative from Sicily. Boat is ready in Corfu approx 15-20 May.
Ivar
|
By
ivarmylde <mylde@...>
·
#8530
·
|
|
How's everything?
How's everything?
Have you found any preferable shopping websites? If not, here I would like to
recommend you www.ofenno.com I have bought a piece of products with favourable
price. You can also get
How's everything?
Have you found any preferable shopping websites? If not, here I would like to
recommend you www.ofenno.com I have bought a piece of products with favourable
price. You can also get
|
By
Horst Pause <horst.puddleduck@...>
·
#8529
·
|
|
Re: [Amel] Re: [Amel standing rigging tensioning
Thanks Joel and Richard.
Eric Maramu 105
________________________________
To: "amelyachtowners@..." <amelyachtowners@...>
Sent: Sat, May 7, 2011 1:16:59 PM
Subject: [Amel]
Thanks Joel and Richard.
Eric Maramu 105
________________________________
To: "amelyachtowners@..." <amelyachtowners@...>
Sent: Sat, May 7, 2011 1:16:59 PM
Subject: [Amel]
|
By
Eric Lindholm <etlindholm@...>
·
#8528
·
|
|
Re: [Amel] Re: Lifting the Outboard
Hi All,
We have also attached to each side of the outboard engine, a Yamaha 8 Hp 4
stroke a metal head screw with O and we put on these the special sheets
supplied by Amel. The position was
Hi All,
We have also attached to each side of the outboard engine, a Yamaha 8 Hp 4
stroke a metal head screw with O and we put on these the special sheets
supplied by Amel. The position was
|
By
Dimitris Krassopoulos <dkra@...>
·
#8527
·
|
|
Re: [Amel] Re: Lewmar Safety Notice and Lifting Accident with Crewmember of an Amel 54
Steve,
The winch continued to worl although he has released the switch. It seems
that Lewmar changed the switches with lower quality and supplied with them
Amel . The SM2000 like Alma LIbre had
Steve,
The winch continued to worl although he has released the switch. It seems
that Lewmar changed the switches with lower quality and supplied with them
Amel . The SM2000 like Alma LIbre had
|
By
Dimitris Krassopoulos <dkra@...>
·
#8526
·
|
|
Re: Lewmar Safety Notice and Lifting Accident with Crewmember of an Amel 54
Dimitris,
That's an interesting point. When your friend says "failed", exactly what does he mean?
I'm not familiar with the 54 (too far out of my price range to even dream about), but I understand
Dimitris,
That's an interesting point. When your friend says "failed", exactly what does he mean?
I'm not familiar with the 54 (too far out of my price range to even dream about), but I understand
|
By
svsummerlove <svsummerlove@...>
·
#8525
·
|
|
Re: Lifting the Outboard
Hi Kent,
Our boat came equipped with a second halyard (blue and white) that leads through a block mounted just below the starboard mizzen spreader. I just checked Liahona, which is docked beside us,
Hi Kent,
Our boat came equipped with a second halyard (blue and white) that leads through a block mounted just below the starboard mizzen spreader. I just checked Liahona, which is docked beside us,
|
By
svsummerlove <svsummerlove@...>
·
#8524
·
|
|
Re: [Amel] Re: Lewmar Safety Notice and Lifting Accident with Crewmember of an Amel 54
Steve,
A friend of mine who has an Amel 54 in Greece advised me that his Lewmar
winch switches failed twice so he changed both the anchor and winch switches
on his boat. So it seems to me that it
Steve,
A friend of mine who has an Amel 54 in Greece advised me that his Lewmar
winch switches failed twice so he changed both the anchor and winch switches
on his boat. So it seems to me that it
|
By
Dimitris Krassopoulos <dkra@...>
·
#8523
·
|
|
Re: [Amel standing rigging tensioning
First make sure the
2 masts are straight in both directions/sides bring all the stays up going around the boat. As the rig gets tighter using a mallet or wooden hammer handle tap the wire when they no
First make sure the
2 masts are straight in both directions/sides bring all the stays up going around the boat. As the rig gets tighter using a mallet or wooden hammer handle tap the wire when they no
|
By
Richard03801 <richard03801@...>
·
#8522
·
|
|
Re: [Amel] Re: Lewmar Safety Notice and Lifting Accident with Crewmember of an Amel 54
Hi Gary,
Liahona is safe, sound and looking as beautiful as ever. Her dock lines are all
OK. We haven't had much weather that would be of concern here in the CCBM
Amellery. A few days in April we
Hi Gary,
Liahona is safe, sound and looking as beautiful as ever. Her dock lines are all
OK. We haven't had much weather that would be of concern here in the CCBM
Amellery. A few days in April we
|
By
Steve Constantine <svsummerlove@...>
·
#8520
·
|
|
Re: Lewmar Safety Notice and Lifting Accident with Crewmember of an Amel 54
I forgot something on the previous post.
The power can also be shut off directly at the battery bank switch, which would be a lot easier and quicker than trying to locate the breakers in an
I forgot something on the previous post.
The power can also be shut off directly at the battery bank switch, which would be a lot easier and quicker than trying to locate the breakers in an
|
By
svsummerlove <svsummerlove@...>
·
#8519
·
|
|
Re: Lewmar Safety Notice and Lifting Accident with Crewmember of an Amel 54
Dimitris,
Before we start blaming the components and the manufacturers, lets wait to see which part failed and more importantly, why.
Has it been determined that it was in fact the switch that
Dimitris,
Before we start blaming the components and the manufacturers, lets wait to see which part failed and more importantly, why.
Has it been determined that it was in fact the switch that
|
By
svsummerlove <svsummerlove@...>
·
#8518
·
|
|
Re: [Amel] Super Maramu Furling Gear
Hi John,
so long as you can get the centre shaft out it is a very straight forward disassemble. Just work from the outside undoing and removing and it is quite simple and logical. Historically the
Hi John,
so long as you can get the centre shaft out it is a very straight forward disassemble. Just work from the outside undoing and removing and it is quite simple and logical. Historically the
|
By
Danny and Yvonne SIMMS
·
#8517
·
|
|
Re: [Amel] Super Maramu Furling Gear
Hello Danny,
Many thanks for your advice which is reassuring and I wait with bated breath for the photos to be posted so I can see where to fit the grease nipples. Am I right in assumong that there is
Hello Danny,
Many thanks for your advice which is reassuring and I wait with bated breath for the photos to be posted so I can see where to fit the grease nipples. Am I right in assumong that there is
|
By
Anne and John Hollamby <annejohnholl@...>
·
#8516
·
|
|
Re: [Amel] Re: Lewmar Safety Notice and Lifting Accident with Crewmember of an Amel 54
Very sad to read of this awful accident. Does anyone know the name of the Amel 54 involved ? Ian and Judy, Pen Azen, SM 302, Spain
Very sad to read of this awful accident. Does anyone know the name of the Amel 54 involved ? Ian and Judy, Pen Azen, SM 302, Spain
|
By
ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
#8515
·
|
|
Want to buy Amel maramu
Well maintained inside,outside,engine ext. and very good equipped for sea going .
My budget for purchasing a boat is 100,000 (USD).
Thanks a lot
Yossi
Well maintained inside,outside,engine ext. and very good equipped for sea going .
My budget for purchasing a boat is 100,000 (USD).
Thanks a lot
Yossi
|
By
yossi_kl
·
#8514
·
|
|
[Amel] Re: Maramu standing rigging tensioning
Joel,
Thank you so much for this posting. I know what you mean, and I know how the riggers will resist...been there.
I have a question: Is the same thing true on the 2 back stays from the mizzen to
Joel,
Thank you so much for this posting. I know what you mean, and I know how the riggers will resist...been there.
I have a question: Is the same thing true on the 2 back stays from the mizzen to
|
By
Judy and Bill aboard SV BeBe <yahoogroups@...>
·
#8513
·
|
|
Re: [Amel] Re: Maramu standing rigging tensioning
Joel, I took your advise and painted my entire mast, due to rain and pollen
its taken longer than expected but looks great and should for many years. I
will be stepping the mast next week and will
Joel, I took your advise and painted my entire mast, due to rain and pollen
its taken longer than expected but looks great and should for many years. I
will be stepping the mast next week and will
|
By
Patrick McAneny
·
#8512
·
|