|
Re: [Amel] Heavy Weather
I did and Google didn't
Roy Duddy
Duddy Law Offices
500 Commercial Street
Suite 401
Manchester, NH 03101
603-668-9000
603-606-2756 Fax
rduddy@...
[Non-text portions of this message
I did and Google didn't
Roy Duddy
Duddy Law Offices
500 Commercial Street
Suite 401
Manchester, NH 03101
603-668-9000
603-606-2756 Fax
rduddy@...
[Non-text portions of this message
|
By
Roy Duddy <RDuddy@...>
·
#7645
·
|
|
Re: [Amel] Heavy Weather
When a breaking wave comes towards the boat you are going to get wet. We
were pooped at least once on every 3 hour watch. One time the water was up
to one of the crewmembers armpits, however the
When a breaking wave comes towards the boat you are going to get wet. We
were pooped at least once on every 3 hour watch. One time the water was up
to one of the crewmembers armpits, however the
|
By
kimberlite <kimberlite@...>
·
#7644
·
|
|
Re: [Amel] Heavy Weather
Eric,
I remember in one of your earlier posts you described how difficult it was
retrieving the Jordan series drogue, and that it kept throwing the circuit
breaker on the genoa sheet power winch.
Eric,
I remember in one of your earlier posts you described how difficult it was
retrieving the Jordan series drogue, and that it kept throwing the circuit
breaker on the genoa sheet power winch.
|
By
Steve Constantine <svsummerlove@...>
·
#7643
·
|
|
Re: [Amel] Heavy Weather
Was there any water was coming over the stern at the time. What was it like on
board? ....CW
________________________________
To: amelyachtowners@...
Sent: Wed, 15 December, 2010
Was there any water was coming over the stern at the time. What was it like on
board? ....CW
________________________________
To: amelyachtowners@...
Sent: Wed, 15 December, 2010
|
By
Conn Williamson <connwilliamson@...>
·
#7642
·
|
|
Heavy Weather
On the drogue you run under bare poles, our speed was about 1 ½ knots down
wind. You adjust the angle of the boat with the bridles until you are square
to the oncoming waves. In Force 12 wind you do
On the drogue you run under bare poles, our speed was about 1 ½ knots down
wind. You adjust the angle of the boat with the bridles until you are square
to the oncoming waves. In Force 12 wind you do
|
By
kimberlite <kimberlite@...>
·
#7641
·
|
|
Re: [Amel] Heavy Weather
Eric were you hoved-to at the same time in the storm or were you running?...CW
________________________________
To: amelyachtowners@...
Sent: Wed, 15 December, 2010 3:49:02 PM
Subject:
Eric were you hoved-to at the same time in the storm or were you running?...CW
________________________________
To: amelyachtowners@...
Sent: Wed, 15 December, 2010 3:49:02 PM
Subject:
|
By
Conn Williamson <connwilliamson@...>
·
#7640
·
|
|
Heavy Weather
I have successfully used the Jordan series drogue twice in my life. The last
time ,2008, the winds were force 12 and seas as reported by the coast guard
to be 50-60 feet.
We were the only boat not to
I have successfully used the Jordan series drogue twice in my life. The last
time ,2008, the winds were force 12 and seas as reported by the coast guard
to be 50-60 feet.
We were the only boat not to
|
By
kimberlite <kimberlite@...>
·
#7639
·
|
|
Re: [Amel] Heaving-to
I have that Pardy's book and they recomend deploying a chute or parra anchor off
the windward bow to stop the forward drift. It"s good to hear some Amel sailing
tips and experiences. Thanks
I have that Pardy's book and they recomend deploying a chute or parra anchor off
the windward bow to stop the forward drift. It"s good to hear some Amel sailing
tips and experiences. Thanks
|
By
Conn Williamson <connwilliamson@...>
·
#7638
·
|
|
Re: [Amel] Heaving-to
When hove two the point is to stall the boat so as not to force any motion every boat design will have different tendencies in heavy weather conditions the point is to STOP the motion. There will
When hove two the point is to stall the boat so as not to force any motion every boat design will have different tendencies in heavy weather conditions the point is to STOP the motion. There will
|
By
Richard03801 <richard03801@...>
·
#7637
·
|
|
Re: [Amel] Heaving-to
I tried heaving to with my SM243 and found that I couldn't slip exactly downwind as recommended by the Pardee's. No matter what I did, I sailed forward at about 1/2 kt, which was fine for calming
I tried heaving to with my SM243 and found that I couldn't slip exactly downwind as recommended by the Pardee's. No matter what I did, I sailed forward at about 1/2 kt, which was fine for calming
|
By
karkauai
·
#7636
·
|
|
Re: [Amel] Heaving-to
Hi you need the head sail and a main deeply reefer. I also bring the laze sheet over to wind ward incase the windward wears thru.
Regards
Richard Piller
Hi you need the head sail and a main deeply reefer. I also bring the laze sheet over to wind ward incase the windward wears thru.
Regards
Richard Piller
|
By
Richard03801 <richard03801@...>
·
#7635
·
|
|
Re: [Amel] Heaving-to
Thanks for that info jme, that gives me a good starting point. I thought they
might have heaved-to with just the tripple reefed main.
________________________________
To:
Thanks for that info jme, that gives me a good starting point. I thought they
might have heaved-to with just the tripple reefed main.
________________________________
To:
|
By
Conn Williamson <connwilliamson@...>
·
#7634
·
|
|
Re: [Amel] Heaving-to
This is a subject that has been replied to earlier. In review reduce the main to the 3rd reef. Bring it tight flat to the centerline or very slightly to windward Reduce the head sail to a position
This is a subject that has been replied to earlier. In review reduce the main to the 3rd reef. Bring it tight flat to the centerline or very slightly to windward Reduce the head sail to a position
|
By
jme5462@...
·
#7633
·
|
|
Heaving-to
Has anyone had the fun experience of having to heaving-to in gale force winds on
a Mango-Supermaramu. What sails worked best and how much sail area. How did the
boat behave.
Cheers....Conn Mango
Has anyone had the fun experience of having to heaving-to in gale force winds on
a Mango-Supermaramu. What sails worked best and how much sail area. How did the
boat behave.
Cheers....Conn Mango
|
By
Conn Williamson <connwilliamson@...>
·
#7632
·
|
|
Re: [Amel] Hyères Marina - info on Port Saint Pierre/Amel Shipyard
Hi there are 2 harbors in Hyerse enter the one to the left facing the shore. The one on the right about 1/2 mile south is for small boats.
A nice stop is the island of Poqurell (spelling?). Go to the
Hi there are 2 harbors in Hyerse enter the one to the left facing the shore. The one on the right about 1/2 mile south is for small boats.
A nice stop is the island of Poqurell (spelling?). Go to the
|
By
Richard03801 <richard03801@...>
·
#7631
·
|
|
Port St Pierre Hyeres
Jim,
I took delivery of my SM2K in Hyeres in 2000 and have been back a few times
since. There are two main basins. You need to enter the South basin and the
Capitainerie and arrival berth is on a
Jim,
I took delivery of my SM2K in Hyeres in 2000 and have been back a few times
since. There are two main basins. You need to enter the South basin and the
Capitainerie and arrival berth is on a
|
By
Peter Aubrey <peter.aubrey@...>
·
#7630
·
|
|
Hyères Marina - info on Port Saint Pierre/Amel Shipyard
Hello All,
I am sailing my SM from Barcelona to the Amel shipyards in Hyères next week.
I've been pouring over the charts, Sailing Directions & other publications and have spoken with the Port
Hello All,
I am sailing my SM from Barcelona to the Amel shipyards in Hyères next week.
I've been pouring over the charts, Sailing Directions & other publications and have spoken with the Port
|
By
assistanttoblackdog <atwaterfour@...>
·
#7629
·
|
|
Re: [Amel] Re: New file uploaded to amelyachtowners
«Aileron moulé » : « moulé » is molded in US English or moulded in
traditional English, “aileron” is literally “winglet” but, in this instance,
most likely “rudder blade” (this
«Aileron moulé » : « moulé » is molded in US English or moulded in
traditional English, “aileron” is literally “winglet” but, in this instance,
most likely “rudder blade” (this
|
By
Jean Boucharlat
·
#7628
·
|
|
Re: New file uploaded to amelyachtowners
Can anyone help with translation?
There is a crosshatched area with caption containing "aileron moule" and another caption above containing "venant de moulage." I've tried Google translate but I'm
Can anyone help with translation?
There is a crosshatched area with caption containing "aileron moule" and another caption above containing "venant de moulage." I've tried Google translate but I'm
|
By
Dave_Benjamin
·
#7627
·
|
|
New file uploaded to amelyachtowners
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the amelyachtowners
group.
File : /Rudder.pdf
Uploaded by : Dave_Benjamin
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the amelyachtowners
group.
File : /Rudder.pdf
Uploaded by : Dave_Benjamin
|
By
amelyachtowners@...
·
#7626
·
|