This isn't the USN chart, but it's fairly small file that's compressed for download.  Go to http://www.passageweather.com/ Find the Newport to Bermuda Charts and click on the Gulf Stream chart.  It

Thanks, Eric.  Was there last Winter and they seemed to be a good company.  I went ahead and had it done in Deltaville, VA this summer.  Deltaville Boatyard is a full service outfit that does a

I am trying to find the website for the navy gulfstream chart for the northern USA . My link does not connect any longer. It is black and white. . Fair Winds Eric Amel Super Maramu #376

Thanks..I probably won't get there before I re-rig.  I live in Seattle .

If you happen by St Martin FKG rigging has everything metric you will need and they do a fantastic job. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Here I am again talking about the outhaul and jib car lines. I got the Endura braid 7/16" and installed it on all of the above. Noticed a little slipping the first time out in 20kts on the beam and

Hi we are the owners of SM 209. We've owned it took very good care of her up date the Eletronics and much more. She is now for sale take a look at her at the roguewaveyachtesales web site. Or on the

SM 243 was comissioned in 1999, built 98/99.  She was sailed for a couple years in the Med, then across the Atlantic and in the Caribbean/S. and C. America for 3-4 years.  Since then she's been on

Thanks for the reply.  You are afirming that I should replace it before heading south. Bob

www.internationalyachtservice.de.tl

Hi, we are wintering our boat these days and need some good tips in order to get the most put of it, any relevant info will be highly appriciated - 1. Engine - is it worthwise to temper with anything

Kemt , What year was your boat built? Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf

Hi Bob and Suzy You have been a great help. I will now be going to Gran Canaria to start the ARC with peace of mind. My delivery crew had me frightened. I will redistribute the weight a little

Hi, We are planning to lay up our Amel Kirk for the winter. During this summer I noticed some play in the rudderstock. Does anyone have tips&tricks how to remove and/or adjust the rudder? Thanks,

It is significantly more expensive to replace the standing rigging with metric wire and fittings if you are in the US.  I understand it's not the case if you are in Europe or elsewhere.  If you

Well maintained inside,outside,engine,hull ext. and very good equipped for sea going . I have a budget for purchasing a boat and can offer 75.000$ (USD). Thanks a lot Yossi

I've been told that i should replace the original rigging before going off shore. There is some pitting on the wires but no visible cracks on the swage fittings. My question is does it matter if I

Hi Ivan, This posting assumes that the list to port is static (at rest) as well as moving. I own a 93 Santorin and my experience is that there can be a tendency to list to port but that it can be

Hi All I seem to have a serious problem with the stability of my boat. I recently fitted a Hydrovane Self Steering gear through the bumper offset to the port side. My boat now has a list of about

Stefan, My Amel Maramu 48 is being listed with Jordan Yacht and Ship Co. See jordanyachts.com.  It is located in Ft Lauderdale FL.  This yacht has been sailed around the planet twice and I sailed