Bill was kind enough to post photos of my worn ENO stove hose and also how I removed the outhaul shaft from the gearbox. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ Sent:

I understand that Force 10 is the distributor for ENO parts in the USA. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From: Sent: Subject: I just had my 3 burner

Hi Luis, I still can not create an album or upload a phto Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Bill, Do you have the address of the group moderator? I have many photos that I believe would be helpful and can not upload. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____

Eric, I just posted some photos...email yours to svbebe "at" gmail.com and I will see if I can get them posted. Since Yahoo automatically logs you out after 14 days, you might also try clicking

I have photos of the damaged stove hose and the sledge hammer removal of the main outhaul shaft but i can not post to the photo page??? HELP Eric sm376Step 2 of 2: Click Select Files to locate each

Hi the quadrant is in 2 parts and is more often then not fused or frozen to the shaft. Once you take off the bolts a block of wood and a hammer to get it off. The packing nut is under it. On some

Our Quadrant over the nut appears to be welded to the post. Only one side comes off. Is this normal or does the whole assembly come off to reveal the not? Paul LaFrance SV NOMAD SM 362 To:

Hi under the quadrant at the top of the hull there is a large nut there is not much space it is there that is what holds in the packing. Regards Richard Piller

Deb & John, I am not sure which Amel you have, but you may want to take a look at the photos on this website at

Richard Thanks for your reply. There is no obvious nut on our rudder post unless it is recessed into the tube through which the rudder post exits the boat. Is the nut on your boat obvious and just a

Kent, He is looking for a trans Atlantic and he will be on my boat at that time. Fair Winds Eric _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On

I just had my 3 burner Force10 out for cleaning and found that the hose had been replaced...but too short to get the stove all the way out.  I'll put a new reinforced one on it this time.  Thanks

I'm always happy to have another crew for passages, Eric.  I'll be heading south from Norfolk straight to St. Thomas toward the end of Nov. if he wants to do another trip like that. Kent SM

Hi Eric, I have checked your profile and nothing is wrong. I have deleted an old album created by you that was empty. Do you still have the issue? Regards Jose_Luis Amel Euros 41 (XALOL)

I tried to remove the shaft on the main outhaul motor to no avail. I tried my usual bolt in the bottom trick and hit it with a 5 pound sledge hammer, to no avail. I then used a chemical called PB

I tried to post photos of my stove hose on the photo section but I am not permitted for some reason. We had to remove the stove for repairs, a 4 burner Eno stove. To my amazement and horror the

One of my crewmembers is looking to do the ARC or any trip across the Atlantic this winter. He has made numerous trips offshore to the Caribbean and back with me on my Amel. He is about 40 years

If you have a flat wrench you can get at the nut without having to remove the cables. And then tighten the nut we ve done it a sea under way. Running befor the wind with the sea pushing we had some

I have not replaced it, but I did tighten it. We were getting a little water in rough seas. You have to remove the cables and quadrant...then the lock that holds the large nut. I was able to turn