Hi all, I have posted some original construction drwings of the Santorin, historical documents. I am looking for similar drawings of the propeller assembly, I am going to ask La Rochelles, but maybe

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Santorin some original workshop

No Problem at all you have to use calibrated steel eyes and you have to pay attention that the boat is level . Perhaps you need to place two eyes in the forward attachment. It depends of the length of

Dear Anne, John, Richard and Graham, Thanks for these tips. Glad to hear that sense still reigns in the Eastern Med! When we bought Pen Azen we had Amel fit an extra large gas locker that take two

Vito, No longer in Opua? Close the shop? Yes, please send the photos to svbebe"at"gmail.com I do not have a quote yet, but another yacht here has received a quote from SevenStar from Cochin to

Hi Bill I have had Wanderer Lifted on to a vessel via the lifting eyes. There was no problem with the boat she was fine. Make sure that they have the proper size crane and that the cradle is properly

I have posted pictures of 2 different types of 12V LED spreader bulbs that fit in the existing mounts on the mizzen and main masts. One is a cool white with 2 dozen or so leds the other is warmer

Hello again Ian and Judy, One can get 5 kilo gas tanks in Italy and Malta. They are very similar to the 3 kilo Camping gas tanks but slightly bigger in diameter and 45 cms high. They will go into

Hi Graham, Are you in Canada? I am considering an Amel Sharki as an ideal platform for my wife and I future cruise (2012 or 2013 departure) and would like to chat about the boat with an experienced

Hello Bill. The Super Maramu, just like almost every other Amel boat ever built, was designed with these lifting eyes to allow easy movement of the boat from build station to build station and

Does anyone have experience using the 4 deck level lifting points to lift a Super Maramu? Because of the recent change in Pirate activity and the unrest in Egypt, we are considering transport via

Thanks. Regards Richard Piller

I attach it to the bonding clamp on the gas fill in my starboard cockpit locker. That is also where I stow it when I am sailing. At anchor the wire fits well under the locker gasket and I tie the

Eric, what to you attach the boat side of your zink too?? Richard SM 209 ________________________________ To: amelyachtowners@... Sent: Sun, February 6, 2011 5:23:01 PM Subject: RE:

On mt Amel Super Maramu #376 Kimberlite the engine is disconnected from the ground by a gold Valeo contactor except when the engine is started. My engine is not grounded. However I always hang a Zink

Hi Fabio and other "Santorinians", your info are toooo interesting to me for my future (not so near) plans. What I think to add is only this: 1. liferaft: when I was in Hyeres I planned to locate

Hi, Ian and Judy, it seems you have moved on to sunnier climes since our meeting in Tobermory last July. We cruised the Med for 30 years from Gib to Greece and only used Camping Gaz bottles. The

When we are last in the Med. we bought the "blue" butane cans of gas and a reg. with and adapted it to our "propane" system. That worked rather well. Fill US cans is not even thinkable in the

Hi Mike & Chris, thank you very much for your precious information and suggestions. Italica SN 28 and Akwaaba SN 27 are sisters, I think they left Amel shipyard more or less in the same time! Where

Hi y'all, In the last few years, spent in South America, we have used UK gas bottles. We have refilled these where possible, either with propane or butane. Most countries in South America