Tony, Someone may know a better address but less than a year ago Olivier responded to a request I sent to the address: <sav@...>. Dave Wallace Air Ops Maramu #104 To:

Hello All, I have send three emails to; olivierbeute@... trying to order a few parts. I have never recieved any reply, nor did I get a "non delivery notice". Can anyone supply me with the

The small locker was originally for the gas bottle, or so I understand. On our Marmau, No.168, I have not found a vent, although there appears to be a bit of copper pipe still there, presumably from

Howard.. if you send me your email address to don.gray93@... I will send you a few pictures... she is currently tucked away for the hurricane season. Don <svresolute@...> wrote:

Thanks, Don and Debra. The adjustable backstay fitting was standard on all the Maramus, from the answers I received to this post. Our mast, however, is a single spreader. The connection from the

Behind the curved wood is a gas shutoff valve (on a stock boat)

Hello Howard, We have a 1986 Maramu "MEL" #190 and have done an extensive refit .. some of which will likely have Henri Amel rolling over in his grave.. Our Maramu has a single adjustable backstay

Hi Howard, I can't pick out in the picture the vent you're asking about, but I do know that the locker you're referring to was originally used for the stove gas bottle, which I think was CNG. On Air

In the refit of our Maramu #144 we're currently attacking the interior, replacing the overhead throughout the boat. In doing so, I took a picture of what appears to be a vent above the galley on the

I've found some hard to find seals at various industrial seal suppliers.

Hi Gary, Thanks for your further thoughts and tips. I had forgotten to mention that I did have the transducers checked by Goodwood Marine in Trinidad who emailed B&G in England to ensure that they

Hi Ed, I do not really understand your comments. Can you enlarge a bit for the benefit of one less tech savvy. We had no probs sending the correct amount to Dessalators bank using our internet banking

Hello John and Annie, I am 77 and Anne57. We use the system that we used ocean racing namely that one keeps watch until sleepy or tired and then the other is called up to take over. It worked well on

Dear Sir, Can you please contact me regarding your boat? Thank you gvolos@...

John and Anne, Thanks for the lead. Think that we will try Hemmings and other magazines first. Have not been able to locate any source on the web. On an other note, how do you structure your watches

I have the new board and it does work as described but with one modification. The high pressure sensor on the "old" board has four terminals and the two that are utilized are normally "Closed". The

Sorry folks but they have changed the system and I have been unable to download the photo nor can I alter my last message where I claim to have put the photos in SM319 Bali Hai changes album. Actually

Years ago there were a great many unhappy messages about the fact that Amels instructions made it clear that the sensors should be cleaned regularly but they failed to point out that these were

Hello Anne and John, If you are very rich order it from Amel (shipping costs will be huge). If you are not so rich look at adverts in classic car magazines for suppliers of seals and trims for cars or

Does anyone know where to purchase the one-inch half round sponge gaskets used on the engine compartment and locker hatches? Regards, Anne and John Annie M Mango #1 Kemah, TX