Hey guys keep the stainless steel springs from your Amel supplies seals the mild steel rest quick. Regards Richard Piller Cell 603 767 5330 "brokerage beyond your expectations" [Non-text portions

Kent, Most lip seals have steel springs. Make sure that the lip seals that you purchase are S/S. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Seals worked fine. As far as I know these are standard seals, just need to get the size right. As I recall they are not quite simple O-rings, but have a shape/lip that enhances their oil sealing

Kent, I do not think you would save that much, but it is silly to pay the shipping and duty from France for things like oil seals that can be purchased here. Good luck, Pat

Thanks, Pat. Prolly just saved me a hundred bucks or more, eh? Have a great summer. Kent

Kent, I hardly remember writing that message, it was a while back. But yes, I have bought several sets of seals from them. There is no reason to purchase seals from Amel they are available from

Hi, Pat, Did you put these on Shenanigans yet? Did they work well? Thanks, Kent SM243 KRISTY

Mike on Aletes (SM240). Did you ever put these seals on Aletes? Did they fit and work well? Do you know the part number with Motion Industries/Timken? Mark, on Sabbatical III. Did you put these JL

Hi you will need to replace the ring seals as they are more than likely worn due to heat from running dry. Regards Richard Piller Cell 603 767 5330 "brokerage beyond your expectations" [Non-text

Hello Eric, To set the length of the lines the first thing is to get the kevlar outhaul line really taut so it will not slip. I do this by moving the car about twelve inches back from the stop and

Hi Eric, If it's the distance between the clew and the shackle that you want, on Pen Azen it's 33 cm. BTW, how big is your cruising chute---we have just met a Swedish SM, Lady Annila, Jonas and

Hi Kent, no I didn't. Will post full photo spread and description in the next day or two. Sorry for being so tardy. Regards Danny SM 299 Ocean Pearl Mangonui New Zealand

Hi, We have Super Maramu No. 39 we could have got the motors from Amel but of course it was pretty expensive but they did not have any mounts in stock. It seems the Bongif thingo does not come with

Hey Danny. Did you isolate them from the aluminum housing in any way? Thanks Kent Sent from my BlackBerry® smartphone powered by Alltel

I use a small line for both applications and run it around several times to give me some purchase ( especially for the outhaul). A 6 to 8 ft length should do it for either. Kent SM243 KRISTY Sent from

Hi Eric. Danny Sims on OCEAN PEARL did it on his boat. He said he'd post some pics but hasn't yet. Kent SM243 Kristy Sent from my BlackBerry® smartphone powered by Alltel

Danny, Thanks If you wish my email is Kimberlite at optonline.net Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Sorry Eric, twas me, I have now taken the photos and will post them in the next day or two. I used ordinary steel nipples as that was all I could find at the time. Would prefer

Barb, Is that the number for the super Maramu 2000 about my hull number? Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Hi Barbara. Thanks for the information. Can you tell me which Ames model you have? I have the Maramu 48. Why did they need to build a new mount...couldn't you get the original gear box? Bob &