Eloi, My tuppence worth. Both Trina and Sunpower make good quality panels. If price was not a problem, then I would choose the Sunpower because: 1. It is a little more efficient, and therefore the

I have two LG Neon 2s also- great panels

I went with the LG neon 2, happy they have been putting out more than their ratings, 345w has peaked at 395w. Try to get the class A panels rated for use on the coastline, I think you get what you

Hi, I am upgrading my solar panels on the arch. I am hesitating between the SunPower Maxeon 3 400W and the TrinaSolar Vertex S 400W (similar size and power, but huge price difference). Does anybody

Hi Giovanni, As in the drawing, the square section is 20x20x20mm The U shaped slot is 8mm across, 12mm down The tube is 8mm long I tried to take a photo but it didn't work well. Trust this is

yes please send photos of completed manifold installed - please. Peter Forbes Carango Amel 54 #035 La Rochelle 00447836 209730

Martin, I have just email Laura at SOFOMARIN to ask here specifically the changes made in your version.

Hello Bill, hello to all interested in the manifold for a 54 by coincidence we spent some weeks in La Rochelle. I decided to order the manifold in the Sofomarine shop directly. Taking this opportunity

There is an access panel in the port berth. Washer Access Panel in the Port Berth facing forward – upper right. This wood panel has two screws securing it. You will find water and electrical

Hi everyone; We’re back on board after 1-1/2 years. Many minor issues resolved. The washing machine does not power on at all, when the 220V breaker is turned on. Is there a fuse or any other

Il 22/09/2020 05:53, Alan Leslie ha scritto:

Thank you for the advice and tips on cleaning the fabric. I started first with a 50/50 mix of vinegar applying with a spray bottle. Using a soft brush, I worked it in to the fabric. I then let it set

Hi Woody, are you still seeking the motor brushes for the LS MBT86M motor? I have ordered my "Brushes .31" x .39" x .7" BRUSH SPR-A007" from

Billy, I said, Speed, but I meant the B&G Depth. The receiver of the DST200 has a very wide range of frequency reception whereas the DST210 is much narrower. I am thinking you were the victim of

Billy, from recollection it is a DST200. I have not experienced any problems with that transducer (Bill, this is the depth, not the speed transducer). But the man who would know is Stephane

The Super Maramu Red Line and the Amel 54 (except for the last 54s produced) have a rub rail and waterline stripe of RAL 3003 Ruby Red. I do not have the color of the brown rub rail used on most

Thanks Bill, you answered my question. I have a hydraulic leak and this explains the rudder moving.

Hi Kent, Iris, Mine is a SM Red Line. I have an old note (possibly I took it at Hiėres years ago) that the color code for the rub rail is RAL 3003. I cannot swear on it but I suggest you check it

Billy, I assume that you have a sonic speed transducer, rather than a paddle wheel. I have experienced an erratic reading caused when the frequency of something nearby was at the same frequency as the

It started working again today. Debris on the transducer?