|
Re: [Amel] Re: Batteries, Charger, and Bilge Pump
Hi Kent, Many years ago when I first bought a boat I was told to recite " George Bernard Shaw" when I left it for any length of time, a mnemonic for Gas, Batteries, Seacock. I still do, reminding
Hi Kent, Many years ago when I first bought a boat I was told to recite " George Bernard Shaw" when I left it for any length of time, a mnemonic for Gas, Batteries, Seacock. I still do, reminding
|
By
ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
#8186
·
|
|
Re: [Amel] sensor of the bilg pump
היי יוסי
כנראה שבחיישן לא עובד. האזעקה לשימחתי עובדת
אבל המשאבה לא מתחילה לעבוד לבד.
דש חם
ליאור
ב-3 באפר 2011,
היי יוסי
כנראה שבחיישן לא עובד. האזעקה לשימחתי עובדת
אבל המשאבה לא מתחילה לעבוד לבד.
דש חם
ליאור
ב-3 באפר 2011,
|
By
Lior <lior246@...>
·
#8185
·
|
|
Re: [Amel] sensor of the bilg pump
hi richard
thank a lot for the information. i know where is the switch. manuelly it works perfect but when i turn it to automatic it deosnt work. the water alarm comes before the automatic sensor.
i
hi richard
thank a lot for the information. i know where is the switch. manuelly it works perfect but when i turn it to automatic it deosnt work. the water alarm comes before the automatic sensor.
i
|
By
Lior <lior246@...>
·
#8184
·
|
|
Re: In water bow thruster service
Dear all,
Here is a documented procedure to change seals of the bow thruster "in
water". Sorry it is in french but with a lot of photograps;
Hope it will help
Cheers from sunny Gruissan (Gulf of
Dear all,
Here is a documented procedure to change seals of the bow thruster "in
water". Sorry it is in french but with a lot of photograps;
Hope it will help
Cheers from sunny Gruissan (Gulf of
|
By
Alain Feuillet <alainfeuillet@...>
·
#8182
·
|
|
Re: [Amel] sensor of the bilg pump
Hi there is a switch mounted on the top of the black tube that goes into the bilge it is a simple on off unit with an arm and string when the float goes up it pulls via the string and turns the pump
Hi there is a switch mounted on the top of the black tube that goes into the bilge it is a simple on off unit with an arm and string when the float goes up it pulls via the string and turns the pump
|
By
Richard03801 <richard03801@...>
·
#8181
·
|
|
sensor of the bilg pump
hi
the automatic bilg pump in our amel maramu does not work.
does anyone know how can i check the sensor and where it is?
thanks
lior
sy sababa, maramu #155
hi
the automatic bilg pump in our amel maramu does not work.
does anyone know how can i check the sensor and where it is?
thanks
lior
sy sababa, maramu #155
|
By
Lior <lior246@...>
·
#8180
·
|
|
Re: In water bow thruster service
George,
I have not done it in the water, but I uploaded a set of in-the-water instructions that I originally received from Charlie Cronheim S/V MALAIKA II. You will find in the Files section of this
George,
I have not done it in the water, but I uploaded a set of in-the-water instructions that I originally received from Charlie Cronheim S/V MALAIKA II. You will find in the Files section of this
|
By
Judy and Bill aboard SV BeBe <yahoogroups@...>
·
#8179
·
|
|
Re: Batteries, Charger, and Bilge Pump
Hi everyone,
I read this post with interest. I've noticed that if I am charging (whether shore power or generator) and I turn the house bank switch off to work on something (eg the 24v alternator on
Hi everyone,
I read this post with interest. I've noticed that if I am charging (whether shore power or generator) and I turn the house bank switch off to work on something (eg the 24v alternator on
|
By
Kent Robertson
·
#8178
·
|
|
Re: [Amel] Replacement anchor and chain
Hi Dennis, Sorry to hear of your theft in a "secure" marina.Having spent two years in the Caribbean and 7 years circumnavigating South America we are often asked about pirates and robberies, to which
Hi Dennis, Sorry to hear of your theft in a "secure" marina.Having spent two years in the Caribbean and 7 years circumnavigating South America we are often asked about pirates and robberies, to which
|
By
ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
#8177
·
|
|
Re: [Amel] In water bow thruster service
What is your question?
There are so many problems on this thruster is surely not what Amel did
best.
don't hesitate for question or call
What is your question?
There are so many problems on this thruster is surely not what Amel did
best.
don't hesitate for question or call
|
By
jlm@jlmertz.fr
·
#8176
·
|
|
Re: [Amel] Replacement anchor and chain
You are quite correct, my problem is trying to find someone who
supplies the Bugelanker. No luck so far hence the call for help.
Dennis Woods IL Flauto Magico SM2K 408
[Non-text portions of this
You are quite correct, my problem is trying to find someone who
supplies the Bugelanker. No luck so far hence the call for help.
Dennis Woods IL Flauto Magico SM2K 408
[Non-text portions of this
|
By
Dennis Woods <DENNISWOODS@...>
·
#8175
·
|
|
Re: [Amel] Replacement anchor and chain
Hello Dennis,
I managed to recover your Email from my junk mail section. I am not sure whether you are joking. They used to sell chain and anchors in Ireland and probably still do. Presumably you
Hello Dennis,
I managed to recover your Email from my junk mail section. I am not sure whether you are joking. They used to sell chain and anchors in Ireland and probably still do. Presumably you
|
By
Anne and John Hollamby <annejohnholl@...>
·
#8174
·
|
|
Re: [Amel] In water bow thruster service
Hi you can call me at 1 603 767 5330
Or by email Richard@... we have done it without any issues.
Regards
Richard Piller
Yacht Brokerage Service above and beyond the expected"
Walczak
Hi you can call me at 1 603 767 5330
Or by email Richard@... we have done it without any issues.
Regards
Richard Piller
Yacht Brokerage Service above and beyond the expected"
Walczak
|
By
Richard03801 <richard03801@...>
·
#8173
·
|
|
In water bow thruster service
I am looking for some information from someone who has changed the seals of the bow thruster without hauling. I have a few questions and would appreciate hearing from someone who has had hands on
I am looking for some information from someone who has changed the seals of the bow thruster without hauling. I have a few questions and would appreciate hearing from someone who has had hands on
|
By
george cerillo
·
#8172
·
|
|
Replacement anchor and chain
I recently had my wasi Bugelanker stainless 30kg anchor and 100 metres of chain stolen from my boat in a secure marina here in Ireland (was advised, I should have kept the chain taught, which would
I recently had my wasi Bugelanker stainless 30kg anchor and 100 metres of chain stolen from my boat in a secure marina here in Ireland (was advised, I should have kept the chain taught, which would
|
By
dennis <DENNISWOODS@...>
·
#8171
·
|
|
Re: [Amel] 220 Volt Panel Indicator Light
I carefully cut open the lamp, added 2 leds and a resistor and glued it back together. works great
Eric
I carefully cut open the lamp, added 2 leds and a resistor and glued it back together. works great
Eric
|
By
kimberlite@...
·
#8170
·
|
|
Re: SM2K Yanmar RPM
Mark,
I tend to doubt the Yanmar mechanic pointing a finger at flawed design, but it is likely fouling because it takes very little fouling to cause what you are experiencing. My experience is that
Mark,
I tend to doubt the Yanmar mechanic pointing a finger at flawed design, but it is likely fouling because it takes very little fouling to cause what you are experiencing. My experience is that
|
By
Judy and Bill aboard SV BeBe <yahoogroups@...>
·
#8169
·
|
|
Re: [Amel] triatic
Yes I was referring to the SS bracket. The triatic also Isolates the main mast form the mizzen. Don't forget you've got your radar on miss mizen.
Hey in NH they are getting 8/12" of new snow we
Yes I was referring to the SS bracket. The triatic also Isolates the main mast form the mizzen. Don't forget you've got your radar on miss mizen.
Hey in NH they are getting 8/12" of new snow we
|
By
Richard03801 <richard03801@...>
·
#8168
·
|
|
Re: [Amel] triatic
Richard, Lightning was the one reason I could see for the insulator,It may
prevent a side flash from the mizzen into the cockpit.I am leaving the
motor and its attachment bracket in place I assume
Richard, Lightning was the one reason I could see for the insulator,It may
prevent a side flash from the mizzen into the cockpit.I am leaving the
motor and its attachment bracket in place I assume
|
By
Patrick McAneny
·
#8167
·
|
|
Re: [Amel] triatic
Hi Pat, I'd leave the triatic with insulators as they also keep the rig a bit safer in lightning storms.
There is a bracket under the roller you can also detach or your rigging guy can detach at the
Hi Pat, I'd leave the triatic with insulators as they also keep the rig a bit safer in lightning storms.
There is a bracket under the roller you can also detach or your rigging guy can detach at the
|
By
Richard03801 <richard03801@...>
·
#8166
·
|