Updated List for the 20 units Bow Thruster Seals---- 1. Ken Powers Aquarius US and or EU 2. Ken Powers Aquarius US and or EU 3. Ken Powers Aquarius US and or EU 4. Slavko Despotovic 5. Slavko

Hello All, I just placed a PO for 20 pieces and has been verified by Ray. They are ordering the material, and as soon as the material hits the shop they should be ready the next day. According to

-- Slavko SM 2000 #279 Bonne Anse in Portoroz

Envoyé de mon iPhone 12 juan de zulueta, Ophelie x france

1. Ken Powers Aquarius US and or EU 2. Ken Powers Aquarius US and or EU 3. Ken Powers Aquarius US and or EU 4. Slavko Despotovic 5. Slavko Despotovic 6. Eloi Bamberg 7. Eloi Bamberg 8. Dan

To All, I just received delivery of 2 to 3 weeks. If no one has ordered, I will order 20 sets. I will deliver from Las Vegas for US boats, and will take the rest to Europe with me will ship from

Hi Steve, The traveller car and the end blocks you have look almost identical to the ones we have fitted. I thought I had found a replacement car on Ebay but it isn't going to be compatible. It is the

I would order 2 sets, for SM 2000 and need a delivery to Europe. I hope that the cost of delivery would be reasonable. -- Slavko SM 2000 #279 Bonne Anse in Portoroz

I also would like to buy 2 sets, and have requested delivery from the factory, I am thinking to order 20 pieces and sell 18 pieces. Ken Powers Aquarius SM2K#262

I would order three sets if they are compatible with Super Maramu and provided I can get them delivered to Australia -- Darren & Karen SM171 Tradewinds III Tasmania, Australia

I would also order 2 . Eloi SM2K 426 RedLion

Our starboard foresail winch has started to complain. After servicing the above deck hardware it sounded better but still a bit more growly than normal. Suspecting the motor brushes. Not having had

I sent a request in yesterday, but have not gotten a response yet. Personally I will order 3 ( 2 for me and 1 for another SM). Thanks, Dan Feierabend SM #86

Hello All, Since there has been discussion of the BT seals, thought I would repost this thread with the contact information for obtaining the seals. There is a 10 unit minimum, I had no trouble

Jose, do you still use the inner neoprene seals, too? YES Do you use RTV sealant to keep them in place? I USED SILICON SEALANT Any other tips? Lubricate trunk with silicon grease periodically

Thanks JP! No, Z is working in Lithuania. Someone has to make money in this family. My role is young SPENDER. Currently I am on the hard here in Krabi Boat Lagoon, and loving it. Working away on

Hi Ken, I think it’s the key way and locknut for the fixed pitch prop. Is Z back in Thailand too Jean-Pierre Germain, Eleuthera SM007

This "tool?" was in the same place as my prop puller, but not sure what it is for. Looks like it may help pull out the seals on the prop shaft, but need your help. What is this, and how do you use

Thanks, Steve and Jose, fir the Pics abd description. Jose, do you still use the inner neoprene seals, too? Do you use RTV sealant to keep them in place? Any other tips? Kent SM 243 Kristy -- Kent

Yes, I agree with both Bill R & JP, We have not absolutely needed the extra fuel for ‘underway’ point-to-point passage-making. But we have needed it due to the interruption of the normal supply