Michelle and I had the same experience as Doug. Ordered 5 and arrived in a week. I will say that I thought I would be smart and not buy the holders, and just use VHB tape. This turned out to be a

Yes, I bought them direct from the website. I purchased 5 and a couple of the holders for them and they shipped from Europe for free. Arrived in Virginia in about a week. As for the other N2K

Doug, nice find. Did you buy them off the RuuviTag website? I assume you can simply place in your freezer and read the temps remotely via Bluetooth. It would really be great if you could get them to

Thanks Bill for your information. The drawing makes it clear that the pump is indeed operated with 24 V. In the meantime I was able to phone to a Frigoboat dealer. According to him, Frigoboat always

40A Telemecanique.. I think

Matt, There is a GuiMods hack to the operating system, Venus, which allows for that configuration. The GuiMods is a downloadable file that you can get from the YouTube video. It explains how to

Thanks for that Bill.. really helpful.. it's a 1997 and yes it was in the cockpit locker.. but no QUAI markings or delay timer - just a 40A Telemecanique Relay Solenoid Switch. I guess as part of the

Thanks Bill!.. yes that's exactly where it was.. no markings, just a grey box.. not easy to get to but I guess the cockpit locker needed a clean out anyway :)

Doug, How did you get them to display on the PAGES screen? I can see mine on MAIN, but not PAGES. I second the ease of setup...they are open source, so you can do just about networking you want. Matt

Hello all, I came across an interesting device to monitor temperatures in the different refrigerators, freezer, or even the engine room. I am also placing one in the cabin. They are called Ruuvi

I am 95% sure that a standard automotive relay is used in the Onan. CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550

The following files and folders have been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. /Bowman DC-Oil-Cooler-Issue-K-English.pdf By: Mark McGovern

Based on schematic K1 and K2 are equal relays? Do you know model and manufacturer of the relays? I am not on the boat. Thank you Slavko -- Slavko SM 2000 #279 Bonne Anse in Croatia

On our 1996 SM the transfer switch was located behind the panel at the forward end of the cockpit locker, next to the rear of the watermaker control panel. Bill Kinney SM 160 Harmonie Cat Island,

Thanks a lot Bill! Arthur

Maybe this will help you. It is from my Amel Book Supplements: Refrigeration Saltwater Pump.pdf CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island,

This is the inside of the solenoid switch. The outside of the box is labeled QUAI. It will be in two places depending on the year and model of your Amel. I have no idea what hull number MOthership is,

On hull 426 it is situated above the genset in a grey plastic box. Just follow the cables from the genset and you will find. I don't have a photo at the moment. As there are some modifications on your

I've just installed a Victron Multiplus Inverter in our 1997 SM but can't find the Gen\Shore automative relay switch to wire in the inverter side. I've checked lazorette, port locker and engine room

Reminder: Round Table Discussion ZOOM & STREAM - Provisioning your Amel When: 02/26/2022 20:00 to 21:00 (UTC+00:00) UTC Where: Galveston Organizer: Bill Rouse brouse@... 8323804970 An