|
Re: A54 engine anti siphon vent
I have noticed the same thing. What you are noting is really important. I listen every time I start the engine.
Jamie
A54 #44 Phantom
I have noticed the same thing. What you are noting is really important. I listen every time I start the engine.
Jamie
A54 #44 Phantom
|
By
Jamie Wendell
·
#50188
·
|
|
A54 engine anti siphon vent
Hi all,
Over the few years we have owned Garulfo, we came to notice that the anti siphon vent for the engine that exits in the starboard cockpit drain hole was a good tell tale of a restriction in the
Hi all,
Over the few years we have owned Garulfo, we came to notice that the anti siphon vent for the engine that exits in the starboard cockpit drain hole was a good tell tale of a restriction in the
|
By
Sv Garulfo
·
#50187
·
|
|
Re: Grounding for solar panels / solar arch
Alan, Thanks for confirming that the toilet should be bonded. My boat did not come with a leak detention device ,wish it had. While eroding zincs is normal ,mine are eroding in about 1/3 the time that
Alan, Thanks for confirming that the toilet should be bonded. My boat did not come with a leak detention device ,wish it had. While eroding zincs is normal ,mine are eroding in about 1/3 the time that
|
By
Patrick McAneny
·
#50186
·
|
|
Re: Saint Maarten
At Island Water World, it is $650 per month.
$1068 is 64% more than $650, not exactly (what I consider as) "slightly" more...
but again was, probably is now again, a nice property.
At Island Water World, it is $650 per month.
$1068 is 64% more than $650, not exactly (what I consider as) "slightly" more...
but again was, probably is now again, a nice property.
|
By
Alexandre Uster von Baar
·
#50185
·
|
|
Re: Saint Maarten
The rate for 31 days was $1067.95.
The rate for 31 days was $1067.95.
|
By
Mark Pitt
·
#50184
·
|
|
Re: bonfiglioli for santorin
Hello, yes Amel drill holes to fit and also reduce the cooling fins depth.
Regards
Jp, Amel Santorin 51, Vanille
Hello, yes Amel drill holes to fit and also reduce the cooling fins depth.
Regards
Jp, Amel Santorin 51, Vanille
|
By
Jean-Pierre Massicotte
·
#50183
·
|
|
Re: Main outhaul SN
I'm working on the same thing. Not a full crack like this but it is there. I think amel still has this part
I'm working on the same thing. Not a full crack like this but it is there. I think amel still has this part
|
By
Eric Meury
·
#50182
·
|
|
Re: bonfiglioli for santorin
Did amel drill holes to mount the motor. Here is my old one. Looks like holes drilled by amel. Sn. Number 86.
Did amel drill holes to mount the motor. Here is my old one. Looks like holes drilled by amel. Sn. Number 86.
|
By
Eric Meury
·
#50181
·
|
|
Re: What is underneath
Just air and the copper water tubes next the hull. We opened it up to store bedding I'm vaccum bags and pasta.
Just air and the copper water tubes next the hull. We opened it up to store bedding I'm vaccum bags and pasta.
|
By
Eric Meury
·
#50180
·
|
|
Re: Amel's suggestion to run the Volvo D3-110 (A54) daily while on passage
Sent from my Samsung Galaxy smartphone.
5. Xq
Sent from my Samsung Galaxy smartphone.
5. Xq
|
By
Dave Robards
·
#50179
·
|
|
Re: Saint Maarten
Sent from my Samsung Galaxy smartphone.
Sent from my Samsung Galaxy smartphone.
|
By
Dave Robards
·
#50178
·
|
|
bonfiglioli for santorin
any one know the exact part number for the outhaul gear box. I ordered one from drive tech as spare and when trying to put the motor on, the bolts for the motor do not align with the gearbox.
any one know the exact part number for the outhaul gear box. I ordered one from drive tech as spare and when trying to put the motor on, the bolts for the motor do not align with the gearbox.
|
By
Eric Meury
·
#50177
·
|
|
What is underneath
Hi!
I was wondering what is underneath? Its the bench in a SN....SN.
--
Bernd
SN 119 / Cascais, Portugal
Hi!
I was wondering what is underneath? Its the bench in a SN....SN.
--
Bernd
SN 119 / Cascais, Portugal
|
By
Bernd Spanner
·
#50176
·
|
|
Main outhaul SN
Dear all,
I just found a crack in the ??? on the outhaul. Also the main furlor is not so fit anymore. Please check the pics. Anyone knows where to get them in Europe or have them re-done in V4A iso
Dear all,
I just found a crack in the ??? on the outhaul. Also the main furlor is not so fit anymore. Please check the pics. Anyone knows where to get them in Europe or have them re-done in V4A iso
|
By
Bernd Spanner
·
#50175
·
|
|
Re: Amel's suggestion to run the Volvo D3-110 (A54) daily while on passage
Hello Alex, I believe you are referring to my D3-110 failure. When I experienced my water ingest issue, it was after a fairly calm trip up from Florida to the Chesapeake Bay. I ran the engine quite a
Hello Alex, I believe you are referring to my D3-110 failure. When I experienced my water ingest issue, it was after a fairly calm trip up from Florida to the Chesapeake Bay. I ran the engine quite a
|
By
Jamie Wendell
·
#50174
·
|
|
Re: Saint Maarten
I was there in December and Carrefour has been beautiful rebuilt, even nicer than before.
Interesting Port de Plaisance is now only slightly more than IWW... definitely a nicer place. What are the
I was there in December and Carrefour has been beautiful rebuilt, even nicer than before.
Interesting Port de Plaisance is now only slightly more than IWW... definitely a nicer place. What are the
|
By
Alexandre Uster von Baar
·
#50173
·
|
|
Re: Super Maramu Passerelle Plans
Hi Woody
I have ask Maude in La Rochelle for some plans but no news yet . I’ll follow it up with a phone call and let you know , otherwise I’ll send you measurements and photos if you need
Hi Woody
I have ask Maude in La Rochelle for some plans but no news yet . I’ll follow it up with a phone call and let you know , otherwise I’ll send you measurements and photos if you need
|
By
Nicolas Klene
·
#50172
·
|
|
Re: Grounding for solar panels / solar arch
Yes, you should have 3 wires to the motor +24, -24 and bonding (green/yellow)
We have a leak detection switch in the companion way.....not sure if you have that...it can tell you if you have a leak
Yes, you should have 3 wires to the motor +24, -24 and bonding (green/yellow)
We have a leak detection switch in the companion way.....not sure if you have that...it can tell you if you have a leak
|
By
Alan Leslie
·
#50171
·
|
|
Re: Grounding for solar panels / solar arch
Dave, My boat did not come with electric heads ,so there was no bonding wires going to the head. I realize zincs do erode over time ,but mine are eroding at an accelerated rate I believe ,which could
Dave, My boat did not come with electric heads ,so there was no bonding wires going to the head. I realize zincs do erode over time ,but mine are eroding at an accelerated rate I believe ,which could
|
By
Patrick McAneny
·
#50170
·
|
|
Re: Saint Maarten
Unfortunately, the Carrefour is gone. When we staying there in May the price was only slightly more expensive than IWW.
Unfortunately, the Carrefour is gone. When we staying there in May the price was only slightly more expensive than IWW.
|
By
Mark Pitt
·
#50169
·
|