We had it done to our Super Maramu last winter. It was done by a very experienced contractor 20 miles south of Annapolis who has over 25 years of experience with soda blasting boat hulls. I made it

Dear fellows If anyone needs a new pump or a maintenance kit, contact: info@... Francesca give me 6-8 weeks for a new pump: Diaphragm pump TM 50 24V DC 0,12Kw With body pump in PVC - 460

Hi Eric. Sorry for the delay in replying we are cruising in and put of email contact. I couldnt say the type of insertion rubber but i made the diaphragm out of 2mm. I thought of putting two in but

Hi Ruedi, In my opinion soda blasting is great at removing old paint and leaving a perfect surface for epoxy primer; so long as the operator knows what he is doing... That is a big caveat. In the

Alexandre, please send me your email address: russ "dot" roberts "dot" va "at" gmail "dot" com

Why don't you ask Amel? Best, CW Bill Rouse Amel Yacht Owners School - www.YachtSchool.us 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

Looking for opinions from the AMEL Group about Soda Blasting Because I don’t’ know the history of the last 12 years on WASABI what was below the recent AF, how many layer of AF etc. I have in

Good morning Russ, I saved mine. It is about 35-40% used (but would prefer a sailmaker gives an exact state of use), need the bi-annual restitching. The only issue, it is in Sint Marten (where it

VF44 P1 60 P63B14 B3 SPEED REDUCER, 60;1 RATIO, 63 FRAME, B14 FLANGE , CODE: 200480249 Ian & Margaret S/V Loca Lola II SM153 US East Coast

Von meinem iPhone gesendet

He ian here a foto fro ouer gaerbox from Bonfiglioli . In the afternoon i can send a foto from the bill with part numbers . The Liroy Somer motor you can only order by Amel it was not possible to

I just took delivery for our Bonfiglioli unit. Lead time was several weeks. MITCH SILVERMAN DRIVETECH AUTOMATION, INC. 5401 NW 102ND AVE. #146 SUNRISE, FL. 33351 TEL: 954-746-9800 FAX:

Some have fitted the outhaul gearbox with grease fittings. How has that worked out? We have been trying to seal the top shaft with RTV where water lays to try to mitigate water intrusion and rust.

Hi Dan. I see you are SM#116 and looking at Bonfiglioli gearbox. We are Hull #240 with Leroy Somer MVA M33 gearbox but the reduction ratio should hold true depending on motor speed. Ours is 1:60

Mark, Can you provide the model number and company you purchased it from for the Bonfiglioli MVF44. Also, what does the gear ratio for the main furler and outhaul furler need to be? There are many

We're in the market for a serviceable Genoa to have onboard as a backup on our SM2K. Please email me if you have an extra one hanging around. russ "dot" roberts "dot" va "at" gee-mail "dot"

Thanks Joerg I have no choice but to install it, otherwise the admiral has me peeling potatoes as well as washing up Regards Paul

Hello AMELians, could someone provide the color numbers for a SM2K Redline for the white hull, the red water line and the red stripes at the top of the hull at the side. Thanks so much :-) Fair

For what it's worth, the aircon system on our Amel 50 is AMAZING! It is very quiet and works perfectly. The central chiller unit is in the engine room. If you can convert to it, in my opinion, it

Bill, hi Thank you very much for your opinion but I would like to detail the situation further and request your re-examination The Amel 50 and 60 currently come equipped with a central chiller system