Il 15/03/2020 18:08, Peter de Groot ha scritto:

Peter, You have a number of problems, some I can help you with. SUGGESTIONS: You should never put 100% trust in inherited parts unless you are absolutely sure of their origin. You should always buy

Greetings all, This is the second lip seal I've installed. (The previous owner left a handy stash of parts on board) The first had a single lip, the second came in a bag with Paulstra brand and part

Thanks, I see it now. Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada

For the old MEJ owners, couldn't that problem be solved by just making a slightly longer power cable and create the drip loop? That would solve the problem of water going into the deck locker from the

Here Is the issue the old Furler was smaller and so the wires coming out of the Furrer and back through the deck did not have to loop back up as they do in this photo so the water can get stuck

Was found at: https://amelyachtowners.groups.io/g/main/files/Volvo%20Penta/volvo%20penta%20workshop%20manual%207748668_EN.pdf -- Gerhard Mueller Amel Sharki #60 Currently Kalamata, Greece

Cool Aras I’m headed to Marin Martinique Saturday and will have the wifi extender with me. I also like the Caribbean SIM card combined with a cell phone. Cheers Martin Hameline SV VoileOVent

I use Rogue Wave antenna mounted on mizzen. I also use a small Netgear router / switch. Gives access to all devices on the boat. Range about 5 miles (line of sight). Aras Sharki #163 1988

I just looked on https://amelyachtowners.groups.io/g/main/files and cannot see any Volvo folder. Was this in the original Yahoo group? Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada

Merci Stefan, J’aime le concept Digicel en combinaison wifi extender. Appreciate the information Martin

Hi, We uploaded the workshop manual with all the codes in the « volvo penta » folder of the group. Hope it’ll be useful Thomas GARULFO A54-122 Tahuata, French Polynesia

We also use(d) the Webcatcher (from Silentwind). Easy to install, works like a WLAN-Spot for all your devices. No problems at all. What we underestimated: 1. You have often to many masts or other

Hello Mike, I am surprised the corner seats are failing. Eleuthera is the same vintage and corners are still in good order. However, from my experience, I’ve replaced some of the handles...

Ill hit you up on FB messenger! -- Jeremy Hermanns - "Jer" SVCerulean.com Maramu #105 Marina Del Rey, CA

Hi Charles, Thanks for laying out the process for me. Very cool. And I appreciate your thoroughness. I think it's best if we get you a sample in hand. If we can't find one from another owner, perhaps

Good to hear Ryan & Kelly I will look up your January design. Hard to get fresher than that!

We have a system I designed built around Mikrotik parts that is essentially identical to what Eric linked. It has worked very well for us. I sent a detailed writeup on my design to this list in

Merci Eric

Yes, that’s right: It is the screw for the spare fixed prop on SM’s. it is not for the autoprop. The flat part has to be between the prop and the nut and has to be bend at the end of