I have purchased an Echopilot 2D and now the question is where to install it. Amel advises it needs to be installed 1.5 m away from the sonic speed transducer. They are suggesting 1.5 m forward of

You need to remove the plate circled in red. You will then have access to a large plastic nut which can be tightened clockwise in 1/6 revolution increments. AMEL provides a large custom wrench to

Yes that’s correct Bill, Regards , Stuart On 16 Mar 2020, at 07:46, CW Bill Rouse <brouse@...> wrote:

Are you referring to the rudder post packing inside the water-tight steering, autopilot, and quadrant compartment? Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720

Does anyone have a diagram , is there a stuffing box , or tightening gland and can this be tightened with the boat in the water? Stuart Hemingway

Thank you Bill and Giovanni, Bill, RTV was used, I just did a good job wiping off the excess. The leak is between the shaft and the lip of seal not seal to housing. I agree that we need SAV at Amel.

I went with B&G 4G for just that reason. Power. I just got rid of my Furuno. Wasn't worth anything Aras Sharki #163 1988

Hello Paul, I have both from FURUNO and I am very satisfied with it. The digital radar on both MFD12 and the old one in navigation. I use the digital at night and, if necessary, the analog for control

I just put these in my SM - THEY ARE AMAZING! https://www.amazon.com/gp/product/B000P0R6GQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Was shocked at the range, and how well it uses the cabinet

Hello! Planning to install a Raymarine Quantum radar. We have an very excellent Furuno radar but it draws a lot of AMPS. I have seen that some of you have both the old and the new radar installed. My

Il 15/03/2020 18:08, Peter de Groot ha scritto:

Peter, You have a number of problems, some I can help you with. SUGGESTIONS: You should never put 100% trust in inherited parts unless you are absolutely sure of their origin. You should always buy

Greetings all, This is the second lip seal I've installed. (The previous owner left a handy stash of parts on board) The first had a single lip, the second came in a bag with Paulstra brand and part

Thanks, I see it now. Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada

For the old MEJ owners, couldn't that problem be solved by just making a slightly longer power cable and create the drip loop? That would solve the problem of water going into the deck locker from the

Here Is the issue the old Furler was smaller and so the wires coming out of the Furrer and back through the deck did not have to loop back up as they do in this photo so the water can get stuck

Was found at: https://amelyachtowners.groups.io/g/main/files/Volvo%20Penta/volvo%20penta%20workshop%20manual%207748668_EN.pdf -- Gerhard Mueller Amel Sharki #60 Currently Kalamata, Greece

Cool Aras I’m headed to Marin Martinique Saturday and will have the wifi extender with me. I also like the Caribbean SIM card combined with a cell phone. Cheers Martin Hameline SV VoileOVent

I use Rogue Wave antenna mounted on mizzen. I also use a small Netgear router / switch. Gives access to all devices on the boat. Range about 5 miles (line of sight). Aras Sharki #163 1988

I just looked on https://amelyachtowners.groups.io/g/main/files and cannot see any Volvo folder. Was this in the original Yahoo group? Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada