Hi Eric when you were in the hurricane did you have the standard stern cleats then? Are the super reinforced cleats that you now have the same size at the Amel originals with a bigger backing

Thanks Barry! Kent S/V Kristy

Kent, the fitting came with a hose as well which I connected to the mixer without any problems. Seems to be a regular plumbing fixture. Kind Regards Barry Tradewinds III SM 171 -- Kind Regards Barry

Hi the good news is that I found a competent electrician in Cagliari, Sandro (tel 3476327483, only speaks Italian), and a place to get the stator rewound (Matta Electromeccanica, tel 070 284 647).

Thanks to everyone who responded. I can’t say enough about this group! Some of the suggestions spurred me on to further research, down many rabbit holes. I’d like to give a synopsis of what I

Aldo, It's Mark Fruehauf at www.balcen.com. Email is info at balcen.com. -- Mark McGovern SM #440 Cara Deale, MD USA

Alan. Would you please provide the Dessalator US rep information? I was not aware they had one. Thank you . Aldo A55- Araucaria

Craig, Your summation lines up perfectly with all of my reading on the subject of Reverse Osmosis. The Mid-Chesapeake Bay area will be our cruising grounds for the next few years so my watermaker

Thanks Tom and Danke Elja. Perfect! Kent & Iris S/V Kristy SM 243

Hi Kent, We just replaced our sprayers with this. Works great. Plug and play. Their specs talk about "Female:19mm/1/2PT”, and "Connects to universal G1/2 shower hoses”. Tom Peacock SM #240

This i instal last week Look for a horse in 2 m https://www.svb.de/de/bavaria-duschkopf-fuer-heckdusche.html Von meinem iPhone gesendet Am 26.07.2019 um 15:45 schrieb karkauai via Groups.Io

hi Barry, I’m needing to replace two shower handle sprayers, but can’t figure out what type/size threads are used to connect handle to hose. Was the Kinetic sprayer you got equipped with the same

Thanks to all for sharing your experiences with storms. More tools for the tool bag. Seems like heaving to should work in most conditions, and the drogue may be the ultimate tactic. Mike

Great thread, Thanks all. Question re the JSD and attachment points. We have a JSD and sadly no reinforced rear cleats. What would be the best attachment points on our 54 for both strength and chafe?

Just now looking at that, Eric. I was thinking/hoping that I could run the bridle thru blocks to the jib winches, but haven’t gotten far enough to know if that will work. I have an arch that may

Dave, We always sheet out so the genoa flogs before reefing in, this way the rubber belt in the furler does not break. We do not find it necessary to change heading. Cheers, Paul S/Y Ya Fohi

I did haul out my 54, but not in Monastir... - when I was in Monastir I still had my SM GrosDoux. Right hand guy of Mohamed Mrad (owner of yard) is Amor - he will know all relevant people. Mechanik is

Regarding brackish water operation, that's one of those topics that's been burdened with a lot of myth and misunderstanding in the cruising community. It is absolutely OK to run your water maker in

Barry, I know you’re trying to get across the pond this year. Keep in mind that Amel is now closed through the end of August. Not sure if Amel Hyères closes also. Mohammad

Thank you Robin. So you hauled out when you had a Suoer Maramu? You have never hauled out your 54? Any contacts that you can share? Respectfully; Mohammad & Aty B&B Kokomo Amel 54 #099