|
Leaking water heater
Hi to all,
Few month after buying my boat in 2015, i had a leakage from the inside part of the water heater.
I bought a new one from isotherm ,the same model -basic 40.
Since then , 3 more boilers
Hi to all,
Few month after buying my boat in 2015, i had a leakage from the inside part of the water heater.
I bought a new one from isotherm ,the same model -basic 40.
Since then , 3 more boilers
|
By
ofer magen
·
#50841
·
|
|
Re: Windvane advise
hi there Martin
I am a big fan of windvanes and put one on our maramu last year
on my old boat (30ft) we had a monitor
this time we chose a hydrovane as we used on on a family boat before and they are
hi there Martin
I am a big fan of windvanes and put one on our maramu last year
on my old boat (30ft) we had a monitor
this time we chose a hydrovane as we used on on a family boat before and they are
|
By
smiles bernard
·
#50840
·
|
|
Re: [Amel Yacht Owners] C Drive Photos
Hi Mitchell,
Were you able to go through the pictures in the "C-Drive - Technical " photo album? You'll see my unit with the fairing material cut away. That exposes the cover plate on the front of the
Hi Mitchell,
Were you able to go through the pictures in the "C-Drive - Technical " photo album? You'll see my unit with the fairing material cut away. That exposes the cover plate on the front of the
|
By
Craig Briggs
·
#50839
·
|
|
Windvane advise
Hello
I just bought an Amel Maramu in Martinique and am selling my Rafiki 37 in San Diego.
I have a new Monitor Windvane and am thinking I should transfer it to the Maramu. Scanmar of Monitor says
Hello
I just bought an Amel Maramu in Martinique and am selling my Rafiki 37 in San Diego.
I have a new Monitor Windvane and am thinking I should transfer it to the Maramu. Scanmar of Monitor says
|
By
marty hameline
·
#50838
·
|
|
Re: Headliner fix
It has come to my attention that I made a mistake when I represented that all the Amel boats built after 2006 have the desired spun cotton/felt backing on the vinyl overhead instead of the
It has come to my attention that I made a mistake when I represented that all the Amel boats built after 2006 have the desired spun cotton/felt backing on the vinyl overhead instead of the
|
By
amelforme
·
#50837
·
|
|
Main sail foil connection
Hi all,
My main furler appears to have a rubber “plug” fitted inside the driving hub such that the lower bolt goes through this and only the upper bolt goes through the foil. See attached
Hi all,
My main furler appears to have a rubber “plug” fitted inside the driving hub such that the lower bolt goes through this and only the upper bolt goes through the foil. See attached
|
By
Paul Dowd and Sharon Brown
·
#50836
·
|
|
Re: [Amel Yacht Owners] C Drive Photos
Thanks Craig, also was it difficult knowing where to cut the GRP on the lower unit? Are there any bolts I need to undo within the lower unit to remove the prop shaft? Did you resin the piece back you
Thanks Craig, also was it difficult knowing where to cut the GRP on the lower unit? Are there any bolts I need to undo within the lower unit to remove the prop shaft? Did you resin the piece back you
|
By
Mitchell Petersen
·
#50835
·
|
|
Re: Converting my Amel 54 to lithium batteries: what I did, what I like and what I don't like (after one year of full time live aboard use)
Danny
Yes, we have instructed our listing agent in London to take the advert down next week. She is no longer for sale.
These are great boats and fast becoming classics now, and in our case, Island
Danny
Yes, we have instructed our listing agent in London to take the advert down next week. She is no longer for sale.
These are great boats and fast becoming classics now, and in our case, Island
|
By
Colin - ex SV Island Pearl
·
#50834
·
|
|
Re: [Amel Yacht Owners] C Drive Photos
Hi Mitchell,
I did leave the upper unit attached to the trumpet and lifted the whole assembly together. But if you can get a lifting line around the trumpet itself that may work just fine. I recall
Hi Mitchell,
I did leave the upper unit attached to the trumpet and lifted the whole assembly together. But if you can get a lifting line around the trumpet itself that may work just fine. I recall
|
By
Craig Briggs
·
#50833
·
|
|
Re: Maramu replacement autopilot drive motor
Hi there
Our Maramu has a Raymarine type 2 with a hole cut into the door through which it protrudes.
It works well and looks ok
I find the noise of the autopilot rather tiresome though so use a
Hi there
Our Maramu has a Raymarine type 2 with a hole cut into the door through which it protrudes.
It works well and looks ok
I find the noise of the autopilot rather tiresome though so use a
|
By
smiles bernard
·
#50832
·
|
|
Re: A55: fresh water pump system : Beam IV on passage from Bonaire towards Santa Marta / Carthagena
Stuart,
I gave you all of my ideas. Like I said before I don't think the accumulator tank pressure has anything to do with a continuous running pump.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1
Stuart,
I gave you all of my ideas. Like I said before I don't think the accumulator tank pressure has anything to do with a continuous running pump.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1
|
By
CW Bill Rouse
·
#50831
·
|
|
Re: Headsets
#solution
I have a pair of ceecoach since 3 years and they work perfect for me.
Maybe you have a look
https://www.peiker-cee.de/en
Fair winds
Dieter
Fal-lera Sharki #135
Von:
I have a pair of ceecoach since 3 years and they work perfect for me.
Maybe you have a look
https://www.peiker-cee.de/en
Fair winds
Dieter
Fal-lera Sharki #135
Von:
|
By
INUS - BUSCH
·
#50830
·
|
|
Re: Carrying Tender on Davits while crossing
Hi M & A,
Their prices seem scary at first but if you divide by 2, you get about GBP pricing.
Cheers,
Jean-Pierre Germain
jp.germain45@...
Hi M & A,
Their prices seem scary at first but if you divide by 2, you get about GBP pricing.
Cheers,
Jean-Pierre Germain
jp.germain45@...
|
By
Germain Jean-Pierre
·
#50829
·
|
|
Re: Carrying Tender on Davits while crossing
Thank J.P. All info helps. I’ll look into the OC.
Happy Sailing;
Mohammad and Aty
B&B Kokomo
AMEL 54 #099
Thank J.P. All info helps. I’ll look into the OC.
Happy Sailing;
Mohammad and Aty
B&B Kokomo
AMEL 54 #099
|
By
Mohammad Shirloo
·
#50828
·
|
|
Re: Carrying Tender on Davits while crossing
Hello Mohammed & Any,
We’ve seen and rode in an OCT tender. A very sound dinghy with many desirable features sailors appreciate.
We did a long comparative ride in varying sea state conditions; both
Hello Mohammed & Any,
We’ve seen and rode in an OCT tender. A very sound dinghy with many desirable features sailors appreciate.
We did a long comparative ride in varying sea state conditions; both
|
By
Germain Jean-Pierre
·
#50827
·
|
|
Re: Carrying Tender on Davits while crossing
Hello Thomas;
Thanks for the info. Do you have Alex’s contact information? Do you know if he has the 310 or the 340?
Happy Sailing;
Mohammad and Aty
B&B Kokomo
AMEL 54 #099
Hello Thomas;
Thanks for the info. Do you have Alex’s contact information? Do you know if he has the 310 or the 340?
Happy Sailing;
Mohammad and Aty
B&B Kokomo
AMEL 54 #099
|
By
Mohammad Shirloo
·
#50826
·
|
|
Re: Converting my Amel 54 to lithium batteries: what I did, what I like and what I don't like (after one year of full time live aboard use)
Hi Colin.
Re the sale of Island Pearl. I am not surprised. I looked for any exuse not to sell Ocean Pearl. The reality is they are the most robust and easiest to sail boat available. (In my humble
Hi Colin.
Re the sale of Island Pearl. I am not surprised. I looked for any exuse not to sell Ocean Pearl. The reality is they are the most robust and easiest to sail boat available. (In my humble
|
By
Danny and Yvonne SIMMS
·
#50825
·
|
|
Re: Flowjet refrigeration pumps overhaul
What I didn’t make clear in previous text was that the 3x12.00$ pump relays effectively replaces the expensive and unreliable frigoboat pump controller. So a good, reliable and inexpensive option to
What I didn’t make clear in previous text was that the 3x12.00$ pump relays effectively replaces the expensive and unreliable frigoboat pump controller. So a good, reliable and inexpensive option to
|
By
Porter McRoberts
·
#50824
·
|
|
Re: Converting my Amel 54 to lithium batteries: what I did, what I like and what I don't like (after one year of full time live aboard use)
Hi Scott
Thanks again for the tips. The alternator will be my next step after some local testing yes. We are away from the boat down in Sydney for a week, but the Lithium install went perfectly on
Hi Scott
Thanks again for the tips. The alternator will be my next step after some local testing yes. We are away from the boat down in Sydney for a week, but the Lithium install went perfectly on
|
By
Colin - ex SV Island Pearl
·
#50823
·
|
|
Re: SM2000 - Have you replaced your dishwasher by a fridge/freezer?
#galley
This is great information and a good leg up
Thank you very much Paul, Danny and Bill
This is great information and a good leg up
Thank you very much Paul, Danny and Bill
|
By
Dominique Guenot
·
#50822
·
|