No such issue on my boat. Joerg Esdorn A55 #53 Kincsem

This is how we did on Lady Annila. This one is to mark ”0” And this is the other two Regards Ann-Sofie on S/Y Lady Annila, SM 232, 1998 Skickat från min iPhone

There is a leather upholstery gentleman near vista mar in Panama. He does surprisingly good work at a very reasonable price. We got steering wheel and new seat etc for 200us. After that then dinghy

Boat Leather is a Preferred Yacht School vendor and they have measurements for SM and 54. Contact Tom Armantrout at Tom"at"BoatLeather.com or 1-206-284-9110 Best, CW Bill Rouse Yacht School

Paul, First I have seen it, but I only have 7 Amel 55 clients, Best, CW Bill Rouse Yacht School (formerly Amel School) - Supporting Amel Owners 720 Winnie St Galveston Island, TX 77550 +1(832)

Hi Tom We replaced ours with a kit from these guys http://boatleather.com/product/boatleather-wheel-covers/ You just need to measure your wheel as they show and order whatever colour you want. The kit

On my Sharki 127 I have the usual stainless tubing support for the strut for the spinnaker pole. The support has a clamp assembly (6 fasteners) on the cap shroud and hides a 120mm length of wire. The

Thomas, Loco Lola IIdid a very nice job using leather paint and reconditioned their wheel cover.Or: https://youtu.be/rnf1EaOZsik With bestregards, Mark Skipper Sailing Vessel-

Hi, Yesterday I saw SY Phantom in Jabin's Yacht Yard in Annapolis. If the owner is on this forum or if someone knows him, I would like to get in touch and discuss his experience with the watt&sea

James, The galvanizer I used said they would have to sandblast if there was paint on it, and they would have an extra charge. I would regalvanize every time if I could, I think my cost was about $250

After several years of appearing “fashionably distressed”, our original wheel leather now just looks distressed. Does anyone have any tips for replacing this? Where might I get leather that would

Thank you so much Bill, do you know if this is a common issue? Regards Paul

Paul, I think it is directly in the middle of the stern. Best, CW Bill Rouse Yacht School (formerly Amel School) - Supporting Amel Owners 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 (If

Ok Hans, I understand now, I have just completed the bottom maintenance on my 55 and certainly didn’t see any such crack or signs of a such a thing Best of luck and of course hope it’s only in the

Hi Paul Actually I am in Germany and the boat is in Panama. It is between the rudder and the foldable bathing plattform with the ladder Regards Hans-Jörg Paul Brown <feeder.brown@...> schrieb am Fr.

Could you please send wider image it is difficult for me to see the reference area? Regards Paul 55#17

Dear all Amel 55 Owners does one of you have this „crack“ problems at the Stern above the rudder? Thank you Hans-Jörg Wildhagen SY WASABI hull 13

I haven't heard anything on temp affecting strength but it's a conceivable issue. I've also had mixed reviews on re-galvanizing. My chain as you can see was beyond help. Some shops also balk if the

Thank you both for the information, Greetings from Annapolis, Alex

Hi Oliver, I had a look at the Optibelt website and it certainly looks very promising. I will buy a couple of pairs and we can put it to the test. Nick SY Amelia anchored Corfu AML 54-019