Hello Karen, I am interested in joining the order (will commit today) if the rail you are going to extrude would fit my Amel Mango. Do you have a profile/drawing/picture you can share? Or do you know

Martin, We have been using a Webcatcher (I believe the same as a Bullet) which I bought from Diginav in Le Marin 4 years ago and it has worked perfectly ever since. There was a choice of 3 antenna

We have an extruder in the USA to make a custom extrusion of the Amel rubber rail that fits the Super Maramu and Santorin. The material will be white EDPM, and it will be supplied in 2 pieces each 16

Il 14/03/2020 14:57, CW Bill Rouse ha scritto:

The bottom part goes between the shaft nut and your prop (if it’s a fixed blade, not sure about folding). At least that’s where mine has always been. Ian & Margaret Local Lola II SM153

That’s the bolt and washer for the spare fixed pitch prop. Joel JOEL F. POTTER-CRUISING YACHT SPECIALIST~L.L.C. THE EXPERIENCED AMEL

Hola Amelians, I am looking for current reviews on the best wifi extenders....... I searched the user site files and couldn't find anything new or relevant. Objective is to grab shore wifi while at

I hope I do not get the same experience as you. But will probably install floor lockers to be on the safe side Paul SY Kerpa SM#259

Here is a photo of the part to ID: CW Bill Rouse

Caraibe Marine in Martinique is an Onan dealer. email contact@...

All, I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.

David, While in Le Marin last winter I had a new raw water pump shipped from an Onan dealer in Fla.,it took about a week to be shipped. I am sure you could have seals shipped as well. Good Luck

I have a leak on the genset raw water pump and am in Guadeloupe. Yesterday I managed to source the pump shaft from the onan dealer in pointe a pitre. However am having more difficulty sourcing the

Your first posting is automatically moderated. Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com

I accidentally clicked on spam blocking myself from receiving email from the forum… and Bill just help me to get back in, now using a different email address, which is: uster@... I don’t think I

I replaced ours with Fusion units as well. While the current speaker covers are square I think you will find a round hole behind them. I did have to drill new screw holes, and the old ones are

The old quiet flush base sometimes failed in 10-20 years. It was redesigned. There is not enough time to tell if it is better, but I believe it is. Best, CW Bill Rouse Amel Owners Yacht School +1

Amel installed 2 on each floorboard. On my last boat I also installed 2 locks. We have been knocked down about 12 times on Kimberlite 9 in a hurricane 1 microburst a 2 rogue waves. For about 6 times

Eric Thank you do you have two or one lock on each floor board? Paul

Hi Duane, Lack of a ground connection can cause crazy SWR readings. Lack of a ground connection will make it impossible to transmit. Lack of a ground connection doesn't affect your ability to