Hi Paul! I'm looking for a Bimini exactly like you did. Could you tell me where did you made it? If you have more details, I'll appreciate. Jose Prieto SY Wayag SM323

Hi J-P, I noticed that your poles are quite different to ours...not surprising SM007 cf SM437 Ours, as probably SM422 are quite a lot bigger in diamtre and the end fittings are quite different. We had

Hi Jer, I have had an unfortunate mishap resulting in my starboard wind shield being neatly broken in two. So I am interested in getting a replacement, which Amel do not have. One possible

Hi Tom and Kristin, I broke one of my baby poles on Pacific passage and lost the end fitting overboard. I used the other one as a model and had a copy made in NZ. The pole itself is available at any

As I mentioned in an earlier post, a large bulging crack emerged from under the black collar on my inner down wind pole. My welder confirmed that the inner end sleeves are corroded and burst through

Thx to all of you for the experiences and good hints! We also tried it with a blanket and the noodles. Now we continue with learning to ignore the noises. In the last 5 days I already realized some

Arnold I have no experience with an auto prop. I don’t know if it folds up if you leave the throttle lever in neutral. For the prop shaft alternator to work you must: Switch off the engine and take

Hello All, yes, my boat having the shaft alternator and I am happy that I posted the question...otherwise I would have overlooked this matter that the folding prob may be counterproductive. I am

Hi Kent, hi Iris, many thanks for the welcome note! Volker SY Aquamarine Santorin 027 Malaysia

Miles, Viewed from the engine room, on my Maramu there is a copper strip that starts at the forward engine room bulkhead that runs aft down the inside of the Port engine stringer and then

Hello Amelians I’m going to attempt to redo my bilge bonding strap connection as part of this winters growing list Thanks to this forum for excellent tips and tricks on this project so far. In

Hello James, On our YouTube channel we posted a Video how we installed our Victron Charger Inverter 5000W Go to: S V Vela Nautica On YouTube there is also more information how we switched to lithium

Hi JP we have similar boats number, therefore can yo maybe send me pics about the installation of the AP under the aft cabin bed. Thank you. my email: hanspeterdot beattig at bluemail dot ch regards

Hi, sorry to attend with a question! I am Arnold with the SM 203. I bought the boat this year and I also have a shaft alternator in connection to my Autoprop. First I did´n check if it is working

Volker, Doesn’t your Santorin have a propellor shaft alternator? I don’t think you can use this with a folding prop. I would not be without the electricity this gives me. My batteries are almost

Nicely said, Antonio. Thank you. Et merci beaucoups Maud et al à SAV@Amel. fr Kent Robertson S/V Kristy karkauai@... USA cell: 828-234-6819  Hi guys , Hi owners, Hi Thierry and Maud, I

Welcome to the Amel Family, Volker and Michaela. You have made a choice that you won’t regret, and you will find all the help you will need getting to know Aquamarine right here. Please never

Hi Volker, If you have the shaft alternator installed I would keep the fixed prop. The shaft alternator on the SN is excellent for cruising. Fair winds and have fun with your SN Herbert, SN120,

Yes it is a really nice piece of gear and allows you to clamp the helm firmly and quickly in any position and easily re-position anywhere except exactly over the 3 spokes. In 15 years of use (8 by

A feathering prop has better control at only a minimal increase in drag over a folding prop. ~~~⛵️~~~Matt