|
Re: Outhaul shaft removal
It Should just slide in.
Fair Winds
Eric
SM 376 KImberlite
It Should just slide in.
Fair Winds
Eric
SM 376 KImberlite
|
By
eric freedman <kimberlite@...>
·
#44613
·
|
|
Re: US State taxes
Craig,
I wonder how that would work for a vessel purchased overseas, USCG documented but never registered in a State. South Carolina does not register USCG documented vessels. Annie SM 37 is
Craig,
I wonder how that would work for a vessel purchased overseas, USCG documented but never registered in a State. South Carolina does not register USCG documented vessels. Annie SM 37 is
|
By
John Clark
·
#44612
·
|
|
Re: Turbo heat shield for Perkins M80T
I have not replaced mine but yes it is cloth-like material covering insulation. It is held on with wire and clips. I would replace if oil soaked. I cannot imagine it costs much. You could make one
I have not replaced mine but yes it is cloth-like material covering insulation. It is held on with wire and clips. I would replace if oil soaked. I cannot imagine it costs much. You could make one
|
By
John Clark
·
#44611
·
|
|
Re: Outhaul shaft removal
I don't know anyone who had and difficulty with reassembly.
Best,
CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970
I don't know anyone who had and difficulty with reassembly.
Best,
CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970
|
By
CW Bill Rouse
·
#44610
·
|
|
Re: Outhaul shaft removal
OK, so how difficult to re-assemble it? do you have to use such force?
Kind Regards
Barry & Robyn
Tradewinds III SM#171
OK, so how difficult to re-assemble it? do you have to use such force?
Kind Regards
Barry & Robyn
Tradewinds III SM#171
|
By
seagasm <seagasm@...>
·
#44609
·
|
|
WG: re goiot hatches seal
Gesendet von Yahoo Mail für iPhone
Anfang weitergeleitete Nachricht:
Am Montag, März 4, 2019, 7:36 PM schrieb Joachim Schäfer <shivajogi@...>:
Gesendet von Yahoo Mail für iPhone
Anfang weitergeleitete Nachricht:
Am Montag, März 4, 2019, 7:36 PM schrieb Joachim Schäfer <shivajogi@...>:
|
By
Joachim
·
#44608
·
|
|
Re: 54
Yeah not sure abt that either but did like the idea of more durable and could mnt some flexible solar pannels up there
Yeah not sure abt that either but did like the idea of more durable and could mnt some flexible solar pannels up there
|
By
james Hosford
·
#44607
·
|
|
Re: 54
Thanks Bill!
By
james Hosford
·
#44606
·
|
|
Turbo heat shield for Perkins M80T
Has anyone replaced the turbo heat shield on a Perkins M80T? I think it's supposed to be white and cloth like. Mine is oil soaked and embedded with rust.
Thanks, Dan
Feierabend #86
Has anyone replaced the turbo heat shield on a Perkins M80T? I think it's supposed to be white and cloth like. Mine is oil soaked and embedded with rust.
Thanks, Dan
Feierabend #86
|
By
Dan Wilcox
·
#44605
·
|
|
Re: US State taxes
Craig,
We too foundFlorida to be different from most other states. The boating industry is so importantto the economy there, the state is protecting that business.
We purchasedCream Puff in
Craig,
We too foundFlorida to be different from most other states. The boating industry is so importantto the economy there, the state is protecting that business.
We purchasedCream Puff in
|
By
Mark Erdos
·
#44604
·
|
|
Re: US State taxes
Mark,
We brought our US flagged boat back to the US, registered it in Florida and paid no sales/use tax, even though it had been registered in NH, which has 0% tax.
When we bought it in FL in 2000 I
Mark,
We brought our US flagged boat back to the US, registered it in Florida and paid no sales/use tax, even though it had been registered in NH, which has 0% tax.
When we bought it in FL in 2000 I
|
By
Craig Briggs
·
#44603
·
|
|
Re: US State taxes
Paul,
Since the boatis USA flagged and should you decide to take it to the USA, you will berequired to pay Use tax (sales and use) in the state where the boat is locatedafter a specific period of
Paul,
Since the boatis USA flagged and should you decide to take it to the USA, you will berequired to pay Use tax (sales and use) in the state where the boat is locatedafter a specific period of
|
By
Mark Erdos
·
#44602
·
|
|
Re: Outhaul shaft removal
Here are some pics of the puller that Amel uses at the Amel Caraibes Center in Martinique. Albon lent me the tool and it allowed me to remove the shaft with almost no effort. In anticipation of the
Here are some pics of the puller that Amel uses at the Amel Caraibes Center in Martinique. Albon lent me the tool and it allowed me to remove the shaft with almost no effort. In anticipation of the
|
By
rossirossix4
·
#44601
·
|
|
Re: US State taxes
Paul,
In what state is your boat registered?
Or is it just documented in the USA without a state registration?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
Paul,
In what state is your boat registered?
Or is it just documented in the USA without a state registration?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
eric freedman <kimberlite@...>
·
#44600
·
|
|
Re: Window reveals refurb?
Tom,
Since I have not yet used the 2 part Epifanes, I really can not say whether it will have more UV resistance than the single part varnish. I am glad to hear that you like the results after two
Tom,
Since I have not yet used the 2 part Epifanes, I really can not say whether it will have more UV resistance than the single part varnish. I am glad to hear that you like the results after two
|
By
James Alton
·
#44599
·
|
|
Re: US State taxes
The boat is registered US. But after further consideration we have decided not to bring the boat up to the US this year. Thanks for your replies and interest.
Paul
The boat is registered US. But after further consideration we have decided not to bring the boat up to the US this year. Thanks for your replies and interest.
Paul
|
By
Paul Cooper <paul.cooper74@...>
·
#44598
·
|
|
Re: Prop shaft bearing
Hi Rainer
We were next to Rock n Roll in Santa Cruz last year.
My kids and I came to admire her. Very nicely set up boat. I think the sharkis are great boats. We have had the pleasure of hanging out
Hi Rainer
We were next to Rock n Roll in Santa Cruz last year.
My kids and I came to admire her. Very nicely set up boat. I think the sharkis are great boats. We have had the pleasure of hanging out
|
By
smiles bernard
·
#44597
·
|
|
Re: Window reveals refurb?
James
It seems the two part is holding up great after two years inside and out. I was thinking about coating the outside trim with single part epifanes better UV protection?
Thanks for your
James
It seems the two part is holding up great after two years inside and out. I was thinking about coating the outside trim with single part epifanes better UV protection?
Thanks for your
|
By
amel46met
·
#44596
·
|
|
Re: Together again!
Cheers!
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Santa Marta,Colombia
www.creampuff.us
From:main@AmelYachtOwners.groups.io
Cheers!
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Santa Marta,Colombia
www.creampuff.us
From:main@AmelYachtOwners.groups.io
|
By
Mark Erdos
·
#44595
·
|
|
Re: Prop shaft bearing
Hi Rainer
Welcom back. In 2014 I was a little bit too late for buying your SM.
Best
Peter
Wilson SM003/La Rochelle
Gesendet von Yahoo Mail für iPad
Am Freitag, März 1, 2019, 07:14 schrieb Rainer
Hi Rainer
Welcom back. In 2014 I was a little bit too late for buying your SM.
Best
Peter
Wilson SM003/La Rochelle
Gesendet von Yahoo Mail für iPad
Am Freitag, März 1, 2019, 07:14 schrieb Rainer
|
By
Peter Jaeger
·
#44594
·
|