Date   

Re: Bowman DC60 Oilcooler

Arthur Sundqvist
 

Thanks a lot Bill!
Arthur


25 feb. 2022 kl. 05:03 skrev CW Bill Rouse <brouse@...>:

From my Amel Book: Bowman - DC60-Boot XCC/#3367 end caps
<image.png>


CW Bill Rouse Amel Owners Yacht School
720 Winnie, Galveston Island, Texas 77550 
   

On Wed, Feb 23, 2022 at 11:05 PM Trevor Lusty <trevlusty@...> wrote:

E. J. Bowman (Birmingham) Ltd
Chester Street
Birmingham, B6 4AP
United Kingdom

Tel: +44 (0)121 359 5401
E-mail: sales@...





Re: 12 V sea water pump for fridge and freezer

 

Maybe this will help you. It is from my Amel Book Supplements:


CW Bill Rouse Amel Owners Yacht School
720 Winnie, Galveston Island, Texas 77550 
   


On Thu, Feb 24, 2022 at 12:36 PM Martin Birkhoff <mbirkhoff@...> wrote:

Hello Amelians,

the sea water pump which feeds the cooling units of fridge and freezer quitted the job some days ago.
The pump and the spare pump are labelled to be 12 V pumps. Some mysteries to be unraveled:

The measured voltage of the pump wiring is 24 V (25,8 V). How can this happen?
The wiring is disappearing behind the engine rooms front insulation. Any ideas how it is continuing?
Where is the 12 V voltage generated? I would expect one of the three transformers under the navigational table to be the source. Or does there exist another source?

The wiing diagramms of Amel do not show any details concerning this sea water pump.

Thanks for your help

Martin
Mago del Sur - 54#40
currently Marina di Ragusa, Sicily 


Re: Location of Gen/Shore Automatic Relay Switch #replacement

 


This is the inside of the solenoid switch. The outside of the box is labeled QUAI. It will be in two places depending on the year and model of your Amel. I have no idea what hull number MOthership is, but I think it is old enough for the QUAI box to be in the cockpit laz. The following photos are from my Amel Book.

image.png
image.png


CW Bill Rouse Amel Owners Yacht School
720 Winnie, Galveston Island, Texas 77550 
   


On Thu, Feb 24, 2022 at 2:16 PM Alan "Woody" Wood <woody@...> wrote:
I've just installed a Victron Multiplus Inverter in our 1997 SM but can't find the Gen\Shore automative relay switch to wire in the inverter side.
I've checked lazorette, port locker and engine room but can't  seem to find it.
Where is it located and does anyone have a photo so I can recognise it if it's in plain sight and I'm just not recognising it?!

- Woody
SV Mothership


Re: Location of Gen/Shore Automatic Relay Switch #replacement

Eloi Bamberg
 

On hull 426 it is situated above the genset in a grey plastic box. Just follow the cables from the genset and you will find. I don't have a photo at the moment. As there are some modifications on your boat, maybe it is in the "Sarel" box.

Eloi
SM2K 426 RedLion


Location of Gen/Shore Automatic Relay Switch #replacement

Alan "Woody" Wood
 

I've just installed a Victron Multiplus Inverter in our 1997 SM but can't find the Gen\Shore automative relay switch to wire in the inverter side.
I've checked lazorette, port locker and engine room but can't  seem to find it.
Where is it located and does anyone have a photo so I can recognise it if it's in plain sight and I'm just not recognising it?!

- Woody
SV Mothership


Event: Round Table Discussion ZOOM & STREAM - Provisioning your Amel - 02/26/2022 #cal-reminder

main@AmelYachtOwners.groups.io Calendar <noreply@...>
 

Reminder: Round Table Discussion ZOOM & STREAM - Provisioning your Amel

When:
02/26/2022
20:00 to 21:00
(UTC+00:00) UTC

Where:
Galveston

Organizer: Bill Rouse brouse@... 8323804970

An RSVP is requested. Click here to RSVP

Description:
All Amel Group Members,

This will be the first of several Round Table Discussions on subjects that are important to most Amel owners. Our Round Table will consist of volunteers from members of our Group. You can view this as it happens or view it later by streaming the recorded event. One benefit of viewing it live is that you can pose questions to the Round Table by using CHAT in ZOOM to our Moderator, Tilo Peters. Tilo will pose your questions to the Round Table.

Reminder: You may have a sailing partner who is not a member of our Amel Group and did not receive this notice. They may be interested in this Round Table.

Panelists:
David & Leanne (Lenny) Vogel <svperigee@...>
Mark & Cindy Erdos Mark Erdos <mcerdos@...> Cindy <cindy@...>
Slavko Despotovic <slavko@...>
Chris Doucette <amaroksailing@...>
Up to two more may be added. Anyone else wishing to volunteer to be one of the 4-6 panelists for this Round Table should email Bill Rouse at brouse@...

Join Zoom Meeting https://epfl.zoom.us/j/66682344894?pwd=aFA1cVhadUxtUHpaTWROQ0pLUUh1QT09 Meeting ID: 666 8234 4894 Passcode: 468919

Stream This Round Table at a later date, or watch it LIVE with YouTube: https://youtu.be/IduAA8kMZlo

CW Bill Rouse Amel Owners Yacht School
 
720 Winnie, Galveston Island, Texas 77550 
   
 
 


12 V sea water pump for fridge and freezer

Martin Birkhoff
 

Hello Amelians,

the sea water pump which feeds the cooling units of fridge and freezer quitted the job some days ago.
The pump and the spare pump are labelled to be 12 V pumps. Some mysteries to be unraveled:

The measured voltage of the pump wiring is 24 V (25,8 V). How can this happen?
The wiring is disappearing behind the engine rooms front insulation. Any ideas how it is continuing?
Where is the 12 V voltage generated? I would expect one of the three transformers under the navigational table to be the source. Or does there exist another source?

The wiing diagramms of Amel do not show any details concerning this sea water pump.

Thanks for your help

Martin
Mago del Sur - 54#40
currently Marina di Ragusa, Sicily 


Re: Bowman DC60 Oilcooler

Mark McGovern
 

Arthur,

The correct part number is DC60-XCC.  The "X" designates the oil port size (3/8” BSP).  The "CC" designates which rubber couplers.  They are the same couplers which is configuration "C" in Bowmans catalog (Bowman Part Number 3367NP).  Here is a link to the Bowman catalog:  https://ej-bowman.com/wp-content/uploads/2020/09/DC-Oil-Cooler-Issue-K-English.pdf

I will add it to the files section in case the link is changed or disappears.

I recommend purchasing it from Lancing Marine (https://www.lancingmarine.com/) in the UK.  They sell it at a great price and provide great service too.  When my cooler failed I called Bowman directly and they sent me to Lancing Marine to purchase a replacement.

--
Mark McGovern
SM #440 Cara
Warderick Wells, Bahamas


Re: 1980 Amel Sharki for sale (EN)

Gregory Shea
 

Nicolas, 
Do you have a private E mail that I could use to contact you?

Greg Shea
Sharki 133, Cap des iles, Kilada


From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Nicolas Klene via groups.io <laixoi@...>
Sent: Wednesday, January 26, 2022 5:40 AM
To: main@amelyachtowners.groups.io <main@amelyachtowners.groups.io>
Subject: Re: [AmelYachtOwners] 1980 Amel Sharki for sale (EN)
 
80K€ Of course free of  any commissions 

Le 25 janv. 2022 à 22:29, bernard lawson <bernardlawson665@...> a écrit :


Asking Price? Cordially

On Tue, Jan 25, 2022, 16:22 Nicolas Klene via groups.io <laixoi=me.com@groups.io> wrote:
Dear all
My good friend is saling his lovely Sharki.As he does not speak english I have offered to help him , so please email me if interested, I’ll do my best .
The boat is in the south of France,by the head quarter of Amel Mediterranean Sea ,off the beautiful island of Porquerolles.




Nicolas Klene
SV DarNico
Amel 53 # 471



--
Nicolas Klene
DarNico
SM2K # 471
In Marseille






--
Nicolas Klene
DarNico
SM2K # 471
In Marseille


Re: Bowman DC60 Oilcooler

 

From my Amel Book: Bowman - DC60-Boot XCC/#3367 end caps
image.png


CW Bill Rouse Amel Owners Yacht School
720 Winnie, Galveston Island, Texas 77550 
   


On Wed, Feb 23, 2022 at 11:05 PM Trevor Lusty <trevlusty@...> wrote:

E. J. Bowman (Birmingham) Ltd
Chester Street
Birmingham, B6 4AP
United Kingdom

Tel: +44 (0)121 359 5401
E-mail: sales@...


Re: Overhead Curtain Track Fasteners

Craig Briggs
 

Thanks, Michael - mine were so corroded as to be unrecognizable - I'll shop for tiny ones - I've got some on my radio controlled model sailboat so maybe a hobby shop. Brass would be best, for sure.
--
Craig Briggs - s/v Sangaris / SN68  Tropic Isle Harbor, FL


Re: Sharki - Cockpit Table Ideas?

marklesparkle59
 

Good morning from windy Cornwall UK . This is Sea Hobo's table. Not very elegant but seats six close friends. I presume original.

Mark Porter
Sea Hobo
Sharki #96
River Tamar UK

On Wed, 23 Feb 2022, 13:31 Courtney Gorman via groups.io, <Itsfun1=aol.com@groups.io> wrote:

If you’re looking for something smaller and easy

This is great.  
Cheers 
Courtney 
Trippin 
54#101
Carriacou 

On Feb 23, 2022, at 9:08 AM, Dan Carlson <carlsdan61@...> wrote:


We recently installed the Legun bracket shown below and built a small cocktail table to mount on it.

We have seen it on several other boats. So far we like it.

Regards, Daniel and Lori Carlson on sv BeBe SM #387



On Wed, Feb 23, 2022, 8:58 AM Mike & Karen via groups.io <svOdyssea=yahoo.com@groups.io> wrote:
Hello all!  First post by owners of a recently purchased Sharki, which doesn't have a decent table in the cockpit.  There is what I believe to be a mounting bracket for one, just below the mizzen mast.  

We are looking for recommendations of other's designs or a fabricator near the central East Coast area that someone has had good experience with. 

Cheers!

Karen and Mike


Re: Bowman DC60 Oilcooler

Trevor Lusty
 

E. J. Bowman (Birmingham) Ltd
Chester Street
Birmingham, B6 4AP
United Kingdom

Tel: +44 (0)121 359 5401
E-mail: sales@...


Bowman DC60 Oilcooler

Arthur Sundqvist
 

Where can I find the Oilcooler for the Z25 gearbox.

The Bowman DC60.

Which is the exact number on the one I need XXX.
There are so many variants.

For SM435.  Vista.

Kindest regards 
AND FAIR WINDS
Arthur Sundqvist


Re: Overhead Curtain Track Fasteners

Michael Winand
 

We have just replaced our curtains. 
They are fixed with a very small wood screw, normal steel wood screws, if you can, buy brass ones, 
Michael Nebo sm251 

On Wed, 23 Feb 2022, 1:41 pm Craig Briggs, <sangaris68@...> wrote:

Greetings all,
The aluminum channels for the overhead hatch curtains (that the plastic curtain slides go into) are coming down as the fasteners have corroded.

 At first, I thought they were wood screws with very small heads holding it up, but they are quite corroded and not recognizable as screws - they may actually be some sort of nail.

 

 

I’ve tried very small screws, but the heads are all too wide to go into the track.

 

Does anyone know what was used here or what might be used to refasten the tracks?


Cheers,
Craig Briggs - s/v Sangaris / SN68  Tropic Isle Harbor, FL


Re: Sharki - Cockpit Table Ideas?

Courtney Gorman
 


If you’re looking for something smaller and easy

This is great.  
Cheers 
Courtney 
Trippin 
54#101
Carriacou 

On Feb 23, 2022, at 9:08 AM, Dan Carlson <carlsdan61@...> wrote:


We recently installed the Legun bracket shown below and built a small cocktail table to mount on it.

We have seen it on several other boats. So far we like it.

Regards, Daniel and Lori Carlson on sv BeBe SM #387



On Wed, Feb 23, 2022, 8:58 AM Mike & Karen via groups.io <svOdyssea=yahoo.com@groups.io> wrote:
Hello all!  First post by owners of a recently purchased Sharki, which doesn't have a decent table in the cockpit.  There is what I believe to be a mounting bracket for one, just below the mizzen mast.  

We are looking for recommendations of other's designs or a fabricator near the central East Coast area that someone has had good experience with. 

Cheers!

Karen and Mike


Re: Sharki - Cockpit Table Ideas?

Dan Carlson
 

We recently installed the Legun bracket shown below and built a small cocktail table to mount on it.

We have seen it on several other boats. So far we like it.

Regards, Daniel and Lori Carlson on sv BeBe SM #387



On Wed, Feb 23, 2022, 8:58 AM Mike & Karen via groups.io <svOdyssea=yahoo.com@groups.io> wrote:
Hello all!  First post by owners of a recently purchased Sharki, which doesn't have a decent table in the cockpit.  There is what I believe to be a mounting bracket for one, just below the mizzen mast.  

We are looking for recommendations of other's designs or a fabricator near the central East Coast area that someone has had good experience with. 

Cheers!

Karen and Mike


Sharki - Cockpit Table Ideas?

 

Hello all!  First post by owners of a recently purchased Sharki, which doesn't have a decent table in the cockpit.  There is what I believe to be a mounting bracket for one, just below the mizzen mast.  

We are looking for recommendations of other's designs or a fabricator near the central East Coast area that someone has had good experience with. 

Cheers!

Karen and Mike


Re: Onan dipstick puzzle

Patrick McAneny
 

Bill, I don’t think the dipstick is tight enough to form a seal, as we said , more of a puzzle than a problem.
Thanks Again,
Pat
SM Shenanigans
Georgetown, Bahamas 


Re: Lewmar 58 winch slipping

Patrick McAneny
 

Bill,, You have confirmed my suspicion,that it is the pawls most likely. I have to admit that servicing of the winches was on my to do  list before we left and it did not make it to the top before we left. I will service them as soon as I fix the bad water  leak we discovered under the sink last night. I have spare pawls onboard.
Sorry we missed you guys at Black Point ,good luck with your seals and fishing,we caught two mahi sailing south 36 and 45”, finally.
Thanks,
Pat
Shenanigans

4961 - 4980 of 67101