|
mail test -please do not reply
kimberlite <kimberlite@...>
|
|
|
|
bow roller
Mark Hayden
The primary bow roller on our Super Maramu 2000 has pretty large grooves worn into it and we would like to replace it. The spindle appears to welded into the pulpit on both sides. Does anyone have advice on replacing these bow rollers?
Thanks in advance, Mark |
|
|
|
Re: [Amel] Re: Main sheet horses track
Richard03801 <richard03801@...>
Thanks.
Regards Richard Piller "Yacht Brokerage Service above and beyond the expected" Walczak Yacht Brokerage Service LLC 2 Compromise St Annapolis, MD 21401 Cell 603 767 5330 Office Fax www.Walczakyacht.com On Apr 16, 2011, at 13:26, "Judy and Bill aboard SV BeBe" <yahoogroups@...> wrote: Richard, [Non-text portions of this message have been removed] |
|
|
|
[Amel] Re: Main sheet horses track
Judy and Bill aboard SV BeBe <yahoogroups@...>
Richard,
toggle quoted message
Show quoted text
"Mainsheet Horse" = "Mainsheet Track" Hope this helps. Bill s/v BeBe, SM2k, #387 Currently Marmaris, Turkey --- In amelyachtowners@..., Richard03801 <richard03801@...> wrote:
|
|
|
|
Re: [Amel] Re: Main sheet horses track
Richard03801 <richard03801@...>
Hi please explain what you mean by "horse tracks" I'm not familiar with that term. Thanks
PS I'm not able to down load photos from present position Regards Richard Piller "Yacht Brokerage Service above and beyond the expected" Walczak Yacht Brokerage Service LLC 2 Compromise St Annapolis, MD 21401 Cell 603 767 5330 Office Fax www.Walczakyacht.com On Apr 16, 2011, at 5:55, "belitbh" <belitbh@...> wrote:
[Non-text portions of this message have been removed] |
|
|
|
Re: Main sheet horses track
belitbh <belitbh@...>
Please anyone has any idea?
toggle quoted message
Show quoted text
--- In amelyachtowners@..., "belitbh" <belitbh@...> wrote:
|
|
|
|
Re: [Amel] Iridium Phone Sim Chips
Dimitris Krassopoulos <dkra@...>
Have you tried www.mailasail.com ? I plan to use it during my trip from La
Rochelle to Greece Regards Dimitris From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of kimberlite Sent: Saturday, April 16, 2011 7:40 AM To: amelyachtowners@... Subject: [Amel] Iridium Phone Sim Chips I am getting tired of buying a 500 minute sim chip and not using the time. I then have to buy another chip so my unused minutes won't expire. Does anyone have a good source or a better idea? Fair Winds Eric Amel Super Maramu #376 Kimberlite |
|
|
|
Iridium Phone Sim Chips
kimberlite <kimberlite@...>
I am getting tired of buying a 500 minute sim chip and not using the time. I
then have to buy another chip so my unused minutes won't expire. Does anyone have a good source or a better idea? Fair Winds Eric Amel Super Maramu #376 Kimberlite |
|
|
|
Re: [Amel] @all SM Owners with the Perkins M80T engine
Congratulations, Martin and Stenella. What engine do you have? As a general rule the diesels are meant to run at 60 to 70 % of max rpm under load. If you have a turbo charger you'll want to be able to run it at 90% of max rpm for 15min every 4-6 hrs to burn the carbon out of the turbo and exhaust elbow. My old 78hp Volvo was rated at max 3000rpm and my new Yanmar at 3200rpm. You should consider cruising rpm ~2000 to 2200 rpm. With my Volvo. I got the best fuel efficiency at ~2400 rpm. My experience (see old posts re: low rpm) tells me the SuperMaramus with 78hp Volvo were overpropped. It would help to know what engine you have. I have th specs on my repitched fixed prop for the Volvo on the boat, but won't be back aboard until May.
toggle quoted message
Show quoted text
Again, congrats and welcome to the family. Kent SM24 KRISTY Sent from my BlackBerry® smartphone powered by Alltel -----Original Message-----
From: "Martin Knauff" <sy.stenella@...> Sender: amelyachtowners@... Date: Fri, 15 Apr 2011 23:17:15 To: <amelyachtowners@...> Reply-To: amelyachtowners@... Subject: [Amel] @all SM Owners with the Perkins M80T engine Hallo, I´m a new owner of the SM #34. The ship is in the yard to get a refit. I want to mount the three-blade- turning-propeller from Gori. But I don´t know the correct size of the original propeller, because I think, that another one is mounted. The maesure of my old fixed prop is 21/16 530mm. Another question my distributor wants to know, are the revs per minute on cruising speed. I felt to test it before taking the ship outside. Is anyone possible to give a correct answer? Thank you very much in advance, Martin from Stenella,#34 |
|
|
|
@all SM Owners with the Perkins M80T engine
Martin Knauff <sy.stenella@...>
Hallo, I´m a new owner of the SM #34. The ship is in the yard to get a refit. I want to mount the three-blade- turning-propeller from Gori. But I don´t know the correct size of the original propeller, because I think, that another one is mounted. The maesure of my old fixed prop is 21/16 530mm. Another question my distributor wants to know, are the revs per minute on cruising speed. I felt to test it before taking the ship outside. Is anyone possible to give a correct answer? Thank you very much in advance,
Martin from Stenella,#34 |
|
|
|
Re: [Amel] Ocean Navigator
Dimitris Krassopoulos <dkra@...>
Amazing. Thank you Martin it was worth reading it.
Regards Dimitris From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of luvkante Sent: Friday, April 15, 2011 11:04 PM To: amelyachtowners@... Subject: Re: [Amel] Ocean Navigator Hi Dimitris, here it is: <http://www.oceannavigator.com/content/prepare-survival-conditions-1> http://www.oceannavigator.com/content/prepare-survival-conditions-1 Best regards, Martin S/V Chiara --- In <mailto:amelyachtowners%40yahoogroups.com> amelyachtowners@..., "Dimitris Krassopoulos" < <mailto:dkra@...> dkra@...> wrote: <mailto:amelyachtowners%40yahoogroups.com> [mailto:amelyachtowners@... <mailto:amelyachtowners%40yahoogroups.com> ] On Behalf Of Joel Potter Sent: Thursday, April 14, 2011 8:19 PM<mailto:amelyachtowners%40yahoogroups.com> Subject: [Amel] Ocean NavigatorEric/Kimberlite. You may not believe everything. Let me say that I sold Eric his boat and he is always truthful. A little bit crazy perhaps but it takes one to know one....
|
|
|
|
Re: [Amel] Ocean Navigator
luvkante
Hi Dimitris,
toggle quoted message
Show quoted text
here it is: http://www.oceannavigator.com/content/prepare-survival-conditions-1 Best regards, Martin S/V Chiara --- In amelyachtowners@..., "Dimitris Krassopoulos" <dkra@...> wrote:
|
|
|
|
Re: [Amel] Ocean Navigator
Richard03801 <richard03801@...>
Pat you can get Ocean Nav free with your membership to Seven Seas Crusing Club SSCA.org
toggle quoted message
Show quoted text
Regards Richard Piller "Yacht Brokerage Service above and beyond the expected" Walczak Yacht Brokerage Service LLC 2 Compromise St Annapolis, MD 21401 Cell 603 767 5330 Office Fax www.Walczakyacht.com On Apr 15, 2011, at 8:11, "sv Sangaris" <sangaris@...> wrote:
|
|
|
|
Re: [Amel] Ocean Navigator
--- In amelyachtowners@..., "Dimitris Krassopoulos" <dkra@...> wrote:
....> Can you send us a link for the article? Forgive some blatant commercialism, but for those who are members of Seven Seas Cruising Association - SSCA - one of the many benefits is a free on-line subscription to Ocean Navigator. Go to ssca.org and follow the links to Ocean Navigator (join first if you're not already a member.) They haven't posted the May-June issue quite yet, however. Cheers, Craig Briggs Past Pres - SSCA |
|
|
|
Re: [Amel] Ocean Navigator
Dimitris Krassopoulos <dkra@...>
Joel,
Can you send us a link for the article? Regards Dimitris Ex Alma Libre Alma Libre Too under construction From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of Joel Potter Sent: Thursday, April 14, 2011 8:19 PM To: amelyachtowners@... Subject: [Amel] Ocean Navigator Be sure to read the fine article in the May/June Ocean Navigator by Eric/Kimberlite. You may not believe everything. Let me say that I sold Eric his boat and he is always truthful. A little bit crazy perhaps but it takes one to know one.... Joel F. Potter Cruising Yacht Specialist. Amel's Sole Associate For America. Sent from my iPhone. Office: 954 462 5869 Cell: 954 812 2485 _____ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1209 / Virus Database: 1500/3574 - Release Date: 04/14/11 [Non-text portions of this message have been removed] |
|
|
|
Re: [Amel] 220v supply to watermaker
I think at some time we will all want the paint number. I like knowing what info is available should I need it in the future.
Thanks again to all for sharing. Kent SM243 KRISTY Sent from my BlackBerry® smartphone powered by Alltel |
|
|
|
Re: [Amel] 220v supply to watermaker
hanspeter baettig
Captains of all Amel's
Questiom ? can we not use this very good forum for realy important inputs, and not ask question about colour material numbers etc . I think our mail boxes are since some times full of not so interesting questions. May be this questions shoud be answered in a bidirectional manner. Please understand I'm not critisem this very good forum, but often I think the users should first have a look in our very well updatede database. Thanks of cours to sv BEBE , Kimberlite; Pat and all of the experts in Amel questions save sailing Hanspeter Tamango 2 # SM 16 Finike, Turkei Keep an example of our forum in the French commu8n o9ty ----Ursprüngliche Nachricht---- Von: sailw32@aol. com Datum: 14.04.2011 13:43 An: <amelyachtowners@...> Betreff: Re: [Amel] 220v supply to watermaker Eric, I know nothing about Renault paint codes. We are painting the mast with Awlgrip Eggshell, it looks to be a perfect match.There is a automotive paint called Chroma One, I think made by Dupont. Automotive paint supply stores could probably determine the Renault code. Chroma One is also a two part paint, I used it to paint my last boat and it held up very well. The awlgrip can be rolled and tipped and looks like it was sprayed on, although I have seen some less than perfect jobs. Pat SM123 [Non- text portions of this message have been removed] |
|
|
|
I found the mast paint color
kimberlite <kimberlite@...>
8028
Re: [Amel] <http://groups.yahoo.com/group/amelyachtowners/message/8028> Pulling the mast Hi Pat, The paint code Amel gave me is Renault 348 which was what I used when painting the masts on our Sharki. I would be suprised if it was different on any of the models _____ From: kimberlite [mailto:kimberlite@...] Sent: Thursday, April 14, 2011 7:59 AM To: 'kimberlite'; amelyachtowners@... Subject: RE: Renault--mast paint _____ From: kimberlite [mailto:kimberlite@...] Sent: Thursday, April 14, 2011 7:58 AM To: 'amelyachtowners@...' Subject: Renault--mast paint Pat, I thought someone once posted the part number of the paint on the forum but I could not locate it. I need to touch up the base of my main mast and would like to use the same paint. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of sailw32@... Sent: Thursday, April 14, 2011 7:55 AM To: amelyachtowners@... Subject: Re: [Amel] 220v supply to watermaker Eric, You may be correct, Amel may well have used a Renault paint. I said , I just do not have any knowledge of Renault paints and plan to use Awlgrip which I am familiar with and think cannot be beat for a boat. I am sure Amel could provide info on the paint. Thanks, Pat |
|
|
|
Re: Renault--mast paint
georges
Gentlemen, if this may help:
toggle quoted message
Show quoted text
the reference for the Amel mast paint is Renault Panda 348(white). As a matter of fact I just ordered a couple of spray cans of it this week. here is the link to the product: http://www.bleu-distri.com/recherche-peinture-carrosserie/?marque=Renault Name of the company is Bleu Distri. It is located in France (where I now live) and I don't know if they ship overseas. They have been very reactive and offer a good tracking. Georges Pellegrini on Greenlight soon in Greece till October. --- In amelyachtowners@..., kimberlite <kimberlite@...> wrote:
|
|
|
|
Ocean Navigator
amelforme
Be sure to read the fine article in the May/June Ocean Navigator by Eric/Kimberlite. You may not believe everything. Let me say that I sold Eric his boat and he is always truthful. A little bit crazy perhaps but it takes one to know one....
Joel F. Potter Cruising Yacht Specialist. Amel's Sole Associate For America. Sent from my iPhone. Office: 954 462 5869 Cell: 954 812 2485 [Non-text portions of this message have been removed] |
|
|