Date   

Re: A54 top loading fridge /freezer strut

Sv Garulfo
 
Edited

 
 
Hello
 
I guess we have the narrow one like Kokomo with a single strut on RHS (evaporator under worktop to the left of the opening). 
 
It stopped working recently not long after I read about its replacement on a related fridge thread. 
Rather heavy to hold if you trying to load at the same time...
 
Thanks
Soraya

Garulfo A54-122

Tahuata, French Polynesia

 

 


Re: A54 top loading fridge /freezer strut

Mohammad Shirloo
 

Hi Teun;

 

We have the small door for our top loading fridge in the galley and ours does have the struts. Ours also is getting weak and need replacing. So, input on this would also be appreciated if anyone has the part number.

 

Happy Sailing;

 

 

Mohammad and Aty

B&B Kokomo

AMEL 54 #099

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Teun BAAS via groups.io
Sent: Monday, May 18, 2020 10:39 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] A54 top loading fridge /freezer strut

 

Hi Soraya,

 

Looking @ your hull number (being very close to mine) I have been told that if you have the small top loading fridge/freezer there are no struts and you have to hold it open yourself

Does GARULFO have the wide or narrow top?

 

Best Regards Teun

SV AMELIT  A54  #128

 

In storage on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA

May 18, 2020 10:37:48

 

USA cell: +1 832 477 8842

AUSTRALIA cell: +61 5951 8909

 

You can follow AMELIT via this link: https://forecast.predictwind.com/tracking/display/AMELIT

 

 

-----Original Message-----
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Sv Garulfo via groups.io
Sent: Monday, May 18, 2020 10:15
To: Amel Yacht owners Group <main@AmelYachtOwners.groups.io>
Subject: [AmelYachtOwners] A54 top loading fridge /freezer strut

 

Hello

 

Could anyone please confirm the details for the strut of the top loading fridge/freezer of the AMEL 54? And suggest a provider/ website?

 

Thanks for your help

Best

Soraya

 

 

Garulfo A54-122

Tahuata, French Polynesia

 

 


Re: Zink Anode for SPURS Line Cutter

Teun BAAS
 

Morning Ruedi,

 

Thanks for reminding me. Yup – agree.

 

Best Regards Teun

SV AMELIT  A54  #128

 

In storage on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA

May 18, 2020 10:50:47

 

USA cell: +1 832 477 8842

AUSTRALIA cell: +61 5951 8909

 

You can follow AMELIT via this link: https://forecast.predictwind.com/tracking/display/AMELIT

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Rudolf Waldispuehl via groups.io
Sent: Monday, May 18, 2020 10:44
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Zink Anode for SPURS Line Cutter

 

Hi Teun
The Onan Zink Anode is placed in the Heat Exchanger and need to be checked and replaced regularly after its is used/eaten up. I attached 2 photos for you where you can see the location of the Anode on the left side and how it looks like. Cheers and happy Sailing 
Ruedi Waldispuehl
WASABI A54#55 
Currently in Sicily




Re: Self Insurance

Teun BAAS
 

Pat,

 

Agree; understand Bill ROUSE tried this over the last 2 years w/o success. But if we come up with a concept that as a group we would share part of the risk it might be different. It is now not so much anymore a matter of premium costs but it is becoming a matter of being able to get a quote at all on reasonable conditions.

 

Luckily I was able to get AMELIT insured for this coming year but the writing is on the wall.  I hope there is a member of the AYOG who has some experience in this. I would think this should be of interest to LLOYDS. My companies used to have a COMMERCIAL LLOYDS OPEN MARINE POLICY where we would declare at the END of each month what cargo we had on the high seas to be insured during that previous month; was all based on integrity (and the risk of an annual audit hahahahahaha).

 

First step might be to get an idea how many people would be interested in concept (synthetic or not) to get a feeling on the size of the pool.

 

Best Regards Teun

SV AMELIT  A54  #128

 

In storage on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA

May 18, 2020 10:49:12

 

USA cell: +1 832 477 8842

AUSTRALIA cell: +61 5951 8909

 

You can follow AMELIT via this link: https://forecast.predictwind.com/tracking/display/AMELIT

 

 

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Patrick McAneny via groups.io
Sent: Monday, May 18, 2020 10:18
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Self Insurance

 

Teun, I have often thought if we as sizable sub group of Amel owners approached an Insurance Co. with a group buy ,if it would be possible to obtain better coverage at a better price. The same way groups obtain group medical insurance at a better rate than individuals. 

Just a thought,

Pat

SM#123

-----Original Message-----
From: Teun BAAS <teun@...>
To: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io>
Sent: Mon, May 18, 2020 12:41 pm
Subject: Re: [AmelYachtOwners] Self Insurance

Hi Pat & Kent,

 

Since we might be able to make the point of: A) AMEL boats; B) AMEL owners - and therefore a lower risk (????) - combined with thoughts/approach similar to your concept below it might make sense to research a synthetic form by approaching an insurance company for a joint?

 

F.e: no USA insurance company is willing to write/cover my ASTON MARTIN but HAGERTY in MI specializes in this and insured at a lower premium than my the main USA insurers carry my BMW/AUDI.

 

Best Regards Teun

SV AMELIT  A54  #128

 

In storage on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA

May 18, 2020 09:38:21

 

USA cell: +1 832 477 8842

AUSTRALIA cell: +61 5951 8909

 

You can follow AMELIT via this link: https://forecast.predictwind.com/tracking/display/AMELIT

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Patrick McAneny via groups.io
Sent: Monday, May 18, 2020 05:56
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Self Insurance

 

This is a rough outline of a self insurance or shared risk co-op, that I sent Kent and thought I would share with the group. It was prompted by the hassle I have had with obtaining insurance, the restrictions and expense.  Bill suggested self insuring and just buying liability insurance, however in the event of a total loss, it would be a big financial hit, that I could not afford. However, if I could share that risk with even ten others or better yet many more, it would soften the loss. When you consider how few Amel's have been lost outside of a hurricane zone, the risk seems very low, and yet we need to insure against such a great financial lose.

 

1. A  LLC. formed

 

2. An administrator and board to accept membership ,assess deposit amount , administer funds and assess claims.

 

3. A one time deposit could be a percentage of agreed fixed value, perhaps 2 or 2.5% ,eg. $200,000 boat would amount to a $5000 deposit into the fund

 

4. Coverage would be for total loss , fixed value minus say 10% deductible. Figuring most owners could absorb some loss ,and insurance companies have deductibles as well. Hurricane zones excluded.

 

5. Perhaps lightning strike coverage , perhaps coverage would be ,replace with new equipment ,minus a 30 % deductible.This would probably be the largest source of loss. May have a surcharge or higher deductible for Florida locations.

 

6. All funds would be in an interest bearing account,if you can find anyone paying interest.

 

7. Upon leaving the group , the owner would receive a 50% refund of his deposit assuming they had no claims. 

 

8. Perhaps a .20% of fixed value annual fee to go to cost of administration .eg. $3000,000. boat x.20% = $600. annual fee

 

Assuming 200 owners/members at average boat value of $300,000 x 2.5 % = $7,500 deposit or $1,500,000.00 in funds.

a $300,000. loss of a boat would break down to a loss of $1,350. for each of the 200 members.

 

This could even work on a smaller scale . If ten owners shared responsibility for loss. $300,000 minus deductible of 10% ,would be $ 270,000.000 divided by ten owners or $27,000 per owner. Its all about spreading the risk.

 

I wonder why no group has formed a risk co-op as yet. Maybe because insurance used to be less restrictive and more reasonably priced .

 

Stay Safe,

Pat

SM 123
Shenanigans

 

 


Re: Zink Anode for SPURS Line Cutter

WASABI - Rudolf Waldispuehl
 

Hi Teun
The Onan Zink Anode is placed in the Heat Exchanger and need to be checked and replaced regularly after its is used/eaten up. I attached 2 photos for you where you can see the location of the Anode on the left side and how it looks like. Cheers and happy Sailing 
Ruedi Waldispuehl
WASABI A54#55 
Currently in Sicily





Re: A54 top loading fridge /freezer strut

Teun BAAS
 

Hi Soraya,

 

Looking @ your hull number (being very close to mine) I have been told that if you have the small top loading fridge/freezer there are no struts and you have to hold it open yourself

Does GARULFO have the wide or narrow top?

 

Best Regards Teun

SV AMELIT  A54  #128

 

In storage on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA

May 18, 2020 10:37:48

 

USA cell: +1 832 477 8842

AUSTRALIA cell: +61 5951 8909

 

You can follow AMELIT via this link: https://forecast.predictwind.com/tracking/display/AMELIT

 

 

-----Original Message-----
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Sv Garulfo via groups.io
Sent: Monday, May 18, 2020 10:15
To: Amel Yacht owners Group <main@AmelYachtOwners.groups.io>
Subject: [AmelYachtOwners] A54 top loading fridge /freezer strut

 

Hello

 

Could anyone please confirm the details for the strut of the top loading fridge/freezer of the AMEL 54? And suggest a provider/ website?

 

Thanks for your help

Best

Soraya

 

 

Garulfo A54-122

Tahuata, French Polynesia

 


A54 sparcraft pole bell

Sv Garulfo
 

Hello,


Could anyone please confirm the details of the spacecraft pole bell on the AMEL 54?


Thanks
Best
Soraya
Garulfo A54-122
French Polynesia


Re: Self Insurance

Patrick McAneny
 

Teun, I have often thought if we as sizable sub group of Amel owners approached an Insurance Co. with a group buy ,if it would be possible to obtain better coverage at a better price. The same way groups obtain group medical insurance at a better rate than individuals. 
Just a thought,
Pat
SM#123


-----Original Message-----
From: Teun BAAS <teun@...>
To: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io>
Sent: Mon, May 18, 2020 12:41 pm
Subject: Re: [AmelYachtOwners] Self Insurance

Hi Pat & Kent,
 
Since we might be able to make the point of: A) AMEL boats; B) AMEL owners - and therefore a lower risk (????) - combined with thoughts/approach similar to your concept below it might make sense to research a synthetic form by approaching an insurance company for a joint?
 
F.e: no USA insurance company is willing to write/cover my ASTON MARTIN but HAGERTY in MI specializes in this and insured at a lower premium than my the main USA insurers carry my BMW/AUDI.
 
Best Regards Teun
SV AMELIT  A54  #128
 
In storage on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA
May 18, 2020 09:38:21
 
USA cell: +1 832 477 8842
AUSTRALIA cell: +61 5951 8909
 
 
 
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Patrick McAneny via groups.io
Sent: Monday, May 18, 2020 05:56
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Self Insurance
 
This is a rough outline of a self insurance or shared risk co-op, that I sent Kent and thought I would share with the group. It was prompted by the hassle I have had with obtaining insurance, the restrictions and expense.  Bill suggested self insuring and just buying liability insurance, however in the event of a total loss, it would be a big financial hit, that I could not afford. However, if I could share that risk with even ten others or better yet many more, it would soften the loss. When you consider how few Amel's have been lost outside of a hurricane zone, the risk seems very low, and yet we need to insure against such a great financial lose.
 
1. A  LLC. formed
 
2. An administrator and board to accept membership ,assess deposit amount , administer funds and assess claims.
 
3. A one time deposit could be a percentage of agreed fixed value, perhaps 2 or 2.5% ,eg. $200,000 boat would amount to a $5000 deposit into the fund
 
4. Coverage would be for total loss , fixed value minus say 10% deductible. Figuring most owners could absorb some loss ,and insurance companies have deductibles as well. Hurricane zones excluded.
 
5. Perhaps lightning strike coverage , perhaps coverage would be ,replace with new equipment ,minus a 30 % deductible.This would probably be the largest source of loss. May have a surcharge or higher deductible for Florida locations.
 
6. All funds would be in an interest bearing account,if you can find anyone paying interest.
 
7. Upon leaving the group , the owner would receive a 50% refund of his deposit assuming they had no claims. 
 
8. Perhaps a .20% of fixed value annual fee to go to cost of administration .eg. $3000,000. boat x.20% = $600. annual fee
 
Assuming 200 owners/members at average boat value of $300,000 x 2.5 % = $7,500 deposit or $1,500,000.00 in funds.
a $300,000. loss of a boat would break down to a loss of $1,350. for each of the 200 members.
 
This could even work on a smaller scale . If ten owners shared responsibility for loss. $300,000 minus deductible of 10% ,would be $ 270,000.000 divided by ten owners or $27,000 per owner. Its all about spreading the risk.
 
I wonder why no group has formed a risk co-op as yet. Maybe because insurance used to be less restrictive and more reasonably priced .
 
Stay Safe,
Pat
SM 123
Shenanigans
 
 


A54 top loading fridge /freezer strut

Sv Garulfo
 

Hello

Could anyone please confirm the details for the strut of the top loading fridge/freezer of the AMEL 54? And suggest a provider/ website?

Thanks for your help
Best
Soraya


Garulfo A54-122
Tahuata, French Polynesia


Re: Hot Water Heater Power Consumption

Elja Röllinghoff Balu SM 222 <Bijorka@...>
 

Hier follow this link 
You can find a boiler 
230v /24 v 
From 20-60 l 

Von meinem iPhone gesendet


Re: Self Insurance

Teun BAAS
 

Hi Pat & Kent,

 

Since we might be able to make the point of: A) AMEL boats; B) AMEL owners - and therefore a lower risk (????) - combined with thoughts/approach similar to your concept below it might make sense to research a synthetic form by approaching an insurance company for a joint?

 

F.e: no USA insurance company is willing to write/cover my ASTON MARTIN but HAGERTY in MI specializes in this and insured at a lower premium than my the main USA insurers carry my BMW/AUDI.

 

Best Regards Teun

SV AMELIT  A54  #128

 

In storage on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA

May 18, 2020 09:38:21

 

USA cell: +1 832 477 8842

AUSTRALIA cell: +61 5951 8909

 

You can follow AMELIT via this link: https://forecast.predictwind.com/tracking/display/AMELIT

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Patrick McAneny via groups.io
Sent: Monday, May 18, 2020 05:56
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Self Insurance

 

This is a rough outline of a self insurance or shared risk co-op, that I sent Kent and thought I would share with the group. It was prompted by the hassle I have had with obtaining insurance, the restrictions and expense.  Bill suggested self insuring and just buying liability insurance, however in the event of a total loss, it would be a big financial hit, that I could not afford. However, if I could share that risk with even ten others or better yet many more, it would soften the loss. When you consider how few Amel's have been lost outside of a hurricane zone, the risk seems very low, and yet we need to insure against such a great financial lose.

 

1. A  LLC. formed

 

2. An administrator and board to accept membership ,assess deposit amount , administer funds and assess claims.

 

3. A one time deposit could be a percentage of agreed fixed value, perhaps 2 or 2.5% ,eg. $200,000 boat would amount to a $5000 deposit into the fund

 

4. Coverage would be for total loss , fixed value minus say 10% deductible. Figuring most owners could absorb some loss ,and insurance companies have deductibles as well. Hurricane zones excluded.

 

5. Perhaps lightning strike coverage , perhaps coverage would be ,replace with new equipment ,minus a 30 % deductible.This would probably be the largest source of loss. May have a surcharge or higher deductible for Florida locations.

 

6. All funds would be in an interest bearing account,if you can find anyone paying interest.

 

7. Upon leaving the group , the owner would receive a 50% refund of his deposit assuming they had no claims. 

 

8. Perhaps a .20% of fixed value annual fee to go to cost of administration .eg. $3000,000. boat x.20% = $600. annual fee

 

Assuming 200 owners/members at average boat value of $300,000 x 2.5 % = $7,500 deposit or $1,500,000.00 in funds.

a $300,000. loss of a boat would break down to a loss of $1,350. for each of the 200 members.

 

This could even work on a smaller scale . If ten owners shared responsibility for loss. $300,000 minus deductible of 10% ,would be $ 270,000.000 divided by ten owners or $27,000 per owner. Its all about spreading the risk.

 

I wonder why no group has formed a risk co-op as yet. Maybe because insurance used to be less restrictive and more reasonably priced .

 

Stay Safe,

Pat

SM 123
Shenanigans

 

 


Re: Zink Anode for SPURS Line Cutter

Teun BAAS
 

Hi Alexander,

 

I am aware of all the anodes you mention but, maybe a dumb question, where is the anode on the ONAN Generator?

 

Best Regards Teun

SV AMELIT  A54  #128

 

In storage on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA

May 18, 2020 09:18:17

 

USA cell: +1 832 477 8842

AUSTRALIA cell: +61 5951 8909

 

You can follow AMELIT via this link: https://forecast.predictwind.com/tracking/display/AMELIT

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Alexander Hofmann via groups.io
Sent: Sunday, May 17, 2020 23:57
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Zink Anode for SPURS Line Cutter

 

Bonjour Olivier, hello Rudi and Scott,

I want to add my observations of some years: The zinc anode of the Spurs line cutter is completely away after a year, if you do not have the zinc anode on the nose of (in my case folding) propeller. This means, the protection of the big 2 anodes on the rudder blade is most seemingly not enough to protect the line cutter (and the propeller I believe) from corrosion.
After installing the zinc anode on the propeller (instead of the 'red nose plastic' - as Olivier says), which by the way is quite easy also in diving, I detect no corrosion anymore at the zinc anode of the Spurs line cutter.
I am happy now with a full set of zinc anodes from bow to aft, on (1) the bow thruster, (2) the Onan Generator, (3) the spurs line cutter, (4) the nose of the Propeller and (5) the 2 big ones at the rudder blade.

This should last and avoid any corrosion easily a year!

Best regards
Alexander Hofmann, SY Oceanica I, Amel 54#156


Re: Near constant hot water without a generator - Here is how i did it.

Ryan Meador
 

There's nothing special about "AC" vs "DC" for these heater elements, but the voltage does matter, and in common boating usage these current types imply a voltage as well.  The element is just a resistor, so to achieve the desired number of watts, the resistance is sized for a specific voltage.  If you run a 240V element at 24V, you'll get 1/10th the rated output (and vice versa will likely explode).  The other electronics involved (like the thermostat) may actually care about AC vs DC and the voltage; I'm not sure.

Some marine water heaters have two ports so you can have both AC and DC elements at the same time.  I've heard using a DC water heater element as a wind generator's dump load works well.

Ryan and Kelly
SM 233 Iteration
Boston, MA, USA


On Mon, May 18, 2020 at 3:25 AM Matt Salatino via groups.io <helmsmatt=yahoo.com@groups.io> wrote:
Our water heater is an Isotherm.
I haven’t looked at the element nut size.

~~~⛵️~~~Matt

On May 18, 2020, at 7:36 AM, Eric Meury <ericmeury@...> wrote:

hey matt. 

im not 100% sure if there is a difference but i do know that my AC element way to many watts going out.  This is the unit i purchased.  https://globalsolarsupply.com/product/diversion-load-water-heating-element-60a12v-30a24v/

it will work for 12 or 24 volt.  I think if you goole the type of water heater you have you can find out the size of the element.   You will most likely need the professional tool to remove the water heater element.  The cheap home ones will simply not do the job.  at least on my tank that was the case.  ...What brand of water heater do you have?


Re: My Plotter has stopped providing CTS information

John Clanton <jclanton@...>
 

Bob,

 

A few things to check:

  • My 55 has a heading sensor in the forward cabin bilge storage.  That is the first thing I would check.  At delivery, Kevin made a point of warning us to keep any ferrous metal at least three feet away from the sensor.
  • I am not on my boat, but in looking at the manual, there is a section under initial setup that should indicate if it is receiving heading sensor information.
  • Easiest way - Email Stephane at Pochon (stephane@...) with the question.  Include hull number, Furuno model number.

 

 

John W. Clanton

S/V Devereux, 55, No. 65

Antibes, France


Self Insurance

Patrick McAneny
 

This is a rough outline of a self insurance or shared risk co-op, that I sent Kent and thought I would share with the group. It was prompted by the hassle I have had with obtaining insurance, the restrictions and expense.  Bill suggested self insuring and just buying liability insurance, however in the event of a total loss, it would be a big financial hit, that I could not afford. However, if I could share that risk with even ten others or better yet many more, it would soften the loss. When you consider how few Amel's have been lost outside of a hurricane zone, the risk seems very low, and yet we need to insure against such a great financial lose.

1. A  LLC. formed
 
2. An administrator and board to accept membership ,assess deposit amount , administer funds and assess claims.
 
3. A one time deposit could be a percentage of agreed fixed value, perhaps 2 or 2.5% ,eg. $200,000 boat would amount to a $5000 deposit into the fund
 
4. Coverage would be for total loss , fixed value minus say 10% deductible. Figuring most owners could absorb some loss ,and insurance companies have deductibles as well. Hurricane zones excluded.
 
5. Perhaps lightning strike coverage , perhaps coverage would be ,replace with new equipment ,minus a 30 % deductible.This would probably be the largest source of loss. May have a surcharge or higher deductible for Florida locations.
 
6. All funds would be in an interest bearing account,if you can find anyone paying interest.
 
7. Upon leaving the group , the owner would receive a 50% refund of his deposit assuming they had no claims. 
 
8. Perhaps a .20% of fixed value annual fee to go to cost of administration .eg. $3000,000. boat x.20% = $600. annual fee
 
Assuming 200 owners/members at average boat value of $300,000 x 2.5 % = $7,500 deposit or $1,500,000.00 in funds.
a $300,000. loss of a boat would break down to a loss of $1,350. for each of the 200 members.
 
This could even work on a smaller scale . If ten owners shared responsibility for loss. $300,000 minus deductible of 10% ,would be $ 270,000.000 divided by ten owners or $27,000 per owner. Its all about spreading the risk.
 
I wonder why no group has formed a risk co-op as yet. Maybe because insurance used to be less restrictive and more reasonably priced .
 
Stay Safe,
Pat
SM 123
Shenanigans
 
 


Re: My Plotter has stopped providing CTS information

 

Bob, is it possible that the heading sensor is disconnected or not working?

Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sun, May 17, 2020 at 11:23 PM Bob Grey via groups.io <renaissanceiii=yahoo.com.au@groups.io> wrote:
Good morning Captains, I have an interesting problem on my Amel 55, The Furuno plotter has stopped providing Course to Steer information when I select a waypoint. One day it just stopped, and I'm not sure why, everything else works fine just no CTS on the display information.

Any ideas??

Bob Grey
Amel 55 #25
Renaissance 3


Re: anchor wash safety note

Greg A54 172
 

in my experience the problem arises when AWP is not used frequently enough. it gets clogged with sea debris and requires the full refurbishing some time. the good thing is it't bronze and can be repaired :)
 


Re: Near constant hot water without a generator - Here is how i did it.

Matt Salatino
 

Our water heater is an Isotherm.
I haven’t looked at the element nut size.

~~~⛵️~~~Matt

On May 18, 2020, at 7:36 AM, Eric Meury <ericmeury@...> wrote:

hey matt. 

im not 100% sure if there is a difference but i do know that my AC element way to many watts going out.  This is the unit i purchased.  https://globalsolarsupply.com/product/diversion-load-water-heating-element-60a12v-30a24v/

it will work for 12 or 24 volt.  I think if you goole the type of water heater you have you can find out the size of the element.   You will most likely need the professional tool to remove the water heater element.  The cheap home ones will simply not do the job.  at least on my tank that was the case.  ...What brand of water heater do you have?


Re: Zink Anode for SPURS Line Cutter

Alexander Hofmann
 

Bonjour Olivier, hello Rudi and Scott,

I want to add my observations of some years: The zinc anode of the Spurs line cutter is completely away after a year, if you do not have the zinc anode on the nose of (in my case folding) propeller. This means, the protection of the big 2 anodes on the rudder blade is most seemingly not enough to protect the line cutter (and the propeller I believe) from corrosion.
After installing the zinc anode on the propeller (instead of the 'red nose plastic' - as Olivier says), which by the way is quite easy also in diving, I detect no corrosion anymore at the zinc anode of the Spurs line cutter.
I am happy now with a full set of zinc anodes from bow to aft, on (1) the bow thruster, (2) the Onan Generator, (3) the spurs line cutter, (4) the nose of the Propeller and (5) the 2 big ones at the rudder blade.

This should last and avoid any corrosion easily a year!

Best regards
Alexander Hofmann, SY Oceanica I, Amel 54#156


Re: Zink Anode for SPURS Line Cutter

WASABI - Rudolf Waldispuehl
 

Hi Olivier
Thank you. Yes you are completely right. I forgot that U-shaped plastic part which isolate the SPURS from the bonded shaft. 
Have a nice day 
Ruedi

Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf of "Beaute Olivier via groups.io" <atlanticyachtsurvey@...>
Antworten an: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Datum: Sonntag, 17. Mai 2020 um 11:31
An: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Betreff: Re: [AmelYachtOwners] Zink Anode for SPURS Line Cutter

Hello Rudi and Scott,

the reason for the zinc on the SPURS rope-cutter is that it is attached to the fixed blade which is in fact isolated from the prop shaft by a plastic U-shaped part (you will have a close look next time)  Therefore, this fixed blade is not correctly bonded to the rudder zincs, and it is important to keep its zinc in good condition.
The purpose of the plastic part is to reduce friction betwen the shaft and the fixed blade.

Have a nice day.

Olivier.