Hi, is there anyone out there on board a SM or better still a SM2000? I need to know the inside dimensions of the space under the bottom companionway step. That is the height from the removable floor

Erick Thank you for the advice. I will try it soon and will try to find a large washer at a laundromat to make it go faster. Ruth Martin SM #248 Moon Dog

Welcome aboard! I added mention of the Super Mistral to the site--it was an oversite that this model wasn't added. Richard <md3536@m...>" <md3536@m...> wrote: old??

Has anyone seen, or had developed, polar diagrams for the Super Maramu? I'd be interested in seeing them, if you have them and can share them. I believe there's commerical software that there that

Does anyone have pictures of the sm 2000 under construction? If so please e-mail them to me at kimberlt@.... I will reciprocate by mailing you the ones I have if you wish. Fair Winds, eric

wrote: need to know the inside dimensions of the space under the bottom companionway step. That is the height from the removable floor panel under the step to the underside of the bottom step, and

Hi Paddy, thank you so much for the dimensions. I take it that you meant Cms not Mms! I did not know that you had taken delivery yet. Where are you now? Happy New Year to you and all Amel

We have SM 302, Pen Azen.we are spending this winter in the Caribbean with a view to transiting Panama in May or so and then leaving the boat in a secure dock either afloat or ,preferably, ashore

A couple of years ago I asked La Rochelle if they would share the polar diagram. They said they did not have any. As a user of MaxSea (Navigation Software developped by "Informatique & Mer", I then

I am neither a computer whiz nor a decent helmsman but here is a solution to your problem. Purchase "The Capn" Navigation Software and the appropriate electronic charts for your area. Look at the

Thanks. I've sent an email to USSAILING.ORG (formerly USYRU) to see if they have a 'Performance Package' on the Super Maramu. They have quite an extensive database of yachts with this performance

Hi I am seeking recomendations for a spare parts inventory for the Onan Gen set. What has broken down and what parts that you did not have that you wished you did. Thank you Vito Ciaravino ASM

I have a 3 year old OEM 150% sail for a Super maramu that I would like to sell. The sail is in very good shape and has plenty of life left in it. Price $1100.00 Contact me VCMS@... Thank

Hi Vito, take a few pump impellors, anodes and I would also recommend a spare 10 ohm ballast resistor that is in the fuel solenoid valve circuit. It is located inside the control box and mine broke

I had the same problem with the 12 V engine starting battery early August. I have followed the Amel instructions and I have replaced the battery ( which was paid by Amel) as it was discharged

We have a 1980 Sharki with a Perkins 4108 and the rubber in the back engine mounts has deteriorated. Does anyboody know whether these are a Perkins part or do they come from Amel. If so who do we

Hi, You really must have a problem with the 12V circuit. I have left Crusader for a month without any problem starting either the main engine or generator. I would suggest that you start the gen set

"Sugar" Not sure about your Sharki, but on my Mango Amel with a Perkins 4- 236, Amel made the engine mounts in-house. They are very good mounts and when it was time to replace the rubber

There is a switch under the nav station on kimberlite that must be turned off when i leave her. this switch runs the memory on the stereo, electronic barometer, and other things on the boat. it is

If the battry goes flat so quickly then there must be problem with some component of the main engine or genset.If it were me I would call in a diesel mechanic. We have left our SM319 Bali Hai for